Toe nail was the reason i left a good review

Good video. Changed the oil in my 2015 Grand Caravan yesterday. The benefit of doing your own oil changes is inspecting everything else while you're there. BTW nice toenails. LOL

The good informative video gave me the courage to change my own oil. That filter had me concerned. Thank You.

Buddy, all you have to do is remove the plastic engine cover and use a shorter extension. ABSOLUTELY no problem!!!!!!

Thanks for sharing this video. It gave me the confidence to change my own oil, oil filter, and air filter! Also, to clip my toenails. Teehee.

Thanks for the nice video and a nice tip at the end :)

Thank you that was useful information

Hey man thank you for making the video AS it helped us out!!!!

Hi, thanks a lot for sharing your video! 👍 I bought my Chrysler Town & Country 2016 just two weeks ago, so I do not know about it too much. But I'd like to manage to change my oil and filters myself anyway. My question is: (concerning reseting the computer) how can I turn thw starter into the first level, if I have a start button, not a key lock/hole...? Because everytime I press the button the car starts immediatelly... Thanks a lot for your responce. Jan

Sorry, I was referring to the oil filter socket size. I suck the oil out from the top using a vacuum device that requires my compressor.

I purposely searched to see how the filter parts fit back together. I really wish this video showed the spring and how the plastic parts went back in.

My filter is stuck. I got the oil drained out and the plastic cap off of it but the paper filter won't come out. It spins freely but won't come out.

This is a👍👍👍 vlog.

This guy is awesome

Please remember to run a bead of new oil around the new O ring on the filter cover before replacing.

Thank you

What size puralater oil fifter does a 2012 caravan need?

Appreciate Cannabliz….

Good video

Thanks!

Regarding your power steering fluid, check it again with the engine at normal operating temperature.

Video is pretty good but two things should have been poerformed....if you not have a torque wrench, mark the plastic oil cap with a marker at 12 o'clock so when you put the plastic cap back on tighten back to 12 o'clock which will give you roughly the proper torque rather than cracking the cap like this guy. Also after putting in 5 quarts of oil, start up you engine for about 30 seconds, which this guy did not do....check the dipstick and you will need to fill with the 6th quart, that is the max capacity.

How many quarts of oil?

Wimpy tighten, lol

Wrong size socket, should be 7/16

Thanks!!