2016 Indian Chieftain-Kuryakyn Project: Episode 3

No video

2016 Indian Chieftain-Kuryakyn Project: Episode 3

Рет қаралды 39,658

8 жыл бұрын

John from Cruiser Customizing adds the finishing touches to our 2016 Indian Chieftain with Kuryakyn Chrome Starter and Primary covers as well as Chrome Tappet cover and Oil Cooler Cover. This bike wouldn't be complete without our addition of Kuryakyn Spear Themed floorboards and pedals.
Get more details of the parts featured in this video here:
www.cruisercust...
If you have any questions feel free to call our parts specialists at 1-888-857-5417 and we can help find the right parts for your motorcycle.
If you are in the Clarksville area, you can check out this bike at CC Powersports of Clarksville, IN.

Пікірлер: 36

@whataboutbob4205 3 жыл бұрын

For the passenger floor board inserts, use a good c-clamp for pressure (and soapy water) and they slide right in.

@michaelpresley2679 5 жыл бұрын

I have a ton of Kuryakyn parts on my Chieftain LTD and have had ZERO problems or complaints!

@gamagarn 6 жыл бұрын

The windex is good for those rubber inserts on floor boards and grommets too.

@jogibaer2204 6 жыл бұрын

Hi John i Don`t understand all your comments but I learn with the Picture - I am from Germany - you make a very good job - greatings from Old germany

@blairhochstrasser7653 4 жыл бұрын

Anyone have trouble with getting the tape to stick on the ends of the piece? I totally cleaned the area an the ends don't seem to want to stick. Everything seems to be properly lined up any suggestions?

@markwhitehouse8740 7 жыл бұрын

Hi John, from all that you have added to the bike, how much extra weight is the Indian now carrying?

@deepseadiver57 7 жыл бұрын

Wait, I can get every piece you installed in this video episode 3 for 400$......sign me up! I'm at 300 and didn't get half that! I haven't opened any of it from the packaging, I can still return them. Give me a link please!

@niloduarte7266 6 жыл бұрын

passanger floor board it doesn`t stay closed... u got to use it alway open

@davidtheriault5014 8 жыл бұрын

I have this same exact bike and these same left side pieces but had a bear of a time getting the starter cover to line up and stay on as there is a cable that comes out through the triangle frame piece that seems to not allow the cover to sit flush. I eventually gave up. Also, is it possible to get replacement 3m tape?

@CruiserCustomizing 8 жыл бұрын

The cover seemed to sit flush on ours, can you verify the cable routing is the same on our bike? Maybe the factory routed the cables differently? As for the 3M tape you can buy it online or at some local auto stores, but we do not sell it.

@mileslrd7881 5 жыл бұрын

Best work chrome

@aabikerider7690 3 жыл бұрын

very good ^^

@seanoshields6327 4 жыл бұрын

Do the passenger floor boards always stay flat or are they supposed to fold up.

@seanoshields6327 4 жыл бұрын

I want a pair of these spear floorboards, but I want them to fold up and out of the way. Do you know if they make a part to allow them to do that. I do not want them to stay flat all the time.

@alnwayf1075 6 жыл бұрын

How l can buy it?????????? P/s help me and learn me

@oh8wingman 6 жыл бұрын

Did Kuryakyn use metric bolts where they supplied the bolt up (like the toe rests) or did they pull their usual stunt and use UNC so you need two different sets of tools?

@JorgeReyes-gd9xy 8 жыл бұрын

are the passenger pegs retractable like the originals, and also how resistant to the corrosion the chrome parts are if I travel to the ocean often

@CruiserCustomizing 8 жыл бұрын

The passenger pegs do have teh ability to pivot if you do not install the set screws. In most positions the floorboards will contact the side panels if they are folded up so we recommend using the set screw. The chrome finish should be as or more resistant to corrosion when compared to any chrome that comes on the bike from the factory.

@JorgeReyes-gd9xy 8 жыл бұрын

Thanks John have good day!

@seanoshields6327 4 жыл бұрын

@@CruiserCustomizing are they going to make a bracket that allows them to fold up like the ones Indian Motorcycle offers?

@chauffeurmarco 8 жыл бұрын

Where is kyle? Is he still working for Cruiser Customizing?

@CruiserCustomizing 8 жыл бұрын

Kyle is no longer working with Cruiser Customizing, he has moved on to another adventure.

@MrFlyboygully 8 жыл бұрын

Nice

@CruiserCustomizing 8 жыл бұрын

We think so too.

@tcbelvis6257 7 жыл бұрын

Cruiser Customizing Video gidday i just received my extras, ,Question does the engine need to be stone cold before installing them??

@karlneumeister9185 8 жыл бұрын

what would the complete set of spear accessories run?

@CruiserCustomizing 8 жыл бұрын

The full set cost around $400.

@karlneumeister9185 8 жыл бұрын

Thank you

@quinonesm 8 жыл бұрын

Nice, but I fear all this chrome will require more time cleaning and maintaining the shine than riding that beautiful beast.

@CruiserCustomizing 8 жыл бұрын

Yes all that chrome will take a bit more elbow grease, but man it looks good.

@holdenwise 3 жыл бұрын

Not if you use F11

@sjcea0512 6 жыл бұрын

Kuryakyn makes cheap garbage

@SpykeZ0129 6 жыл бұрын

Some of their stuff if nice but I got their longhorn highway pegs and when I took them off to put them on a new bike I saw they cheaped out on the bolts and and washers and were all rusted. 180 bucks for that bullshit.