2016 zx10r tail unit on 2015 anniversary

No video

2016 zx10r tail unit on 2015 anniversary

Рет қаралды 8,911

Күн бұрын

Parts needed.
Rear undertray.
All rear plastics.
Rear subframe alloy top piece. The sides are the same!
Riders seat is the same.
Lock will fit and work but gen5 has slightly shorter cable which would be better.
Rear light which plug isnt direct fit. Needs cutting and joining.
Plastic part that sits on top of the seat latch is needed as it holds top cowl and lean sensor.
Most other parts can be utalised from the gen4 like bolts etc..
Tank needs removing.
Ideal time to change the shock or links or change air filter!
Its not rocket science but its not easy and took me about 6 hours.
Buy used pannels as it should have all the rubber grommets in it all ready.

Пікірлер: 18

@amirrulzarith9565 7 жыл бұрын

hye bro can u make the full video of tail conversion?

@jg7171 4 жыл бұрын

if you could make a complete video that will be great help. i only dislike one thing about my 10r is. its tail. 16 tail is nice . i want to convert my 14 10r tail to gen5 tail.

@supermotomkd8792 6 жыл бұрын

Very nice we have same 15 10r with 16 tail 100% like yours :)

@_mikey2007_ 5 күн бұрын

How did u do that plz contact I also want to do that

@robbeck3316 Жыл бұрын

Wow it looks amazing with the gen 5 tail end.. I wanna do this so bad!!

@Blackcupra43 8 жыл бұрын

nice

@joelperez1779 5 жыл бұрын

que piezas has cambiado exactamente no hay video del montaje

@PejalOneleg 5 жыл бұрын

What did u change to fit the tail of this 16?..

@Yamaprilia 5 жыл бұрын

Not that simple. Rear undertray. All rear plastics. Rear subframe alloy top piece. The sides are the same! Riders seat is the same. Lock will fit and work but gen5 has slightly shorter cable which would be better. Rear light which plug isnt direct fit. Needs cutting and joining. Plastic part that sits on top of the seat latch is needed as it holds top cowl and lean sensor. Most other parts can be utalised from the gen4 like bolts etc.. Tank needs removing. Ideal time to change the shock or links or change air filter! Its not rocket science but its not easy and took me about 6 hours. Buy used pannels as it should have all the rubber grommets in it all ready.

@PejalOneleg 5 жыл бұрын

@@Yamaprilia thnx for the info... i need to find the item as u stated first, then i will work on my gen 4

@ramonudani6212 3 жыл бұрын

Nc carbon fiber rear tire hugger... Can u tell me the what brand is it?

@Yamaprilia 3 жыл бұрын

Sorry i cant remember what make it was

@rishabhmagdum7494 7 жыл бұрын

Hey, Nice job ! Can I have your email I'd Would like to know more details about the tail conversion

@Yamaprilia 7 жыл бұрын

RISHABH MAGDUM Not that simple. Rear undertray. All rear plastics. Rear subframe alloy top piece. The sides are the same! Riders seat is the same. Lock will fit and work but gen5 has slightly shorter cable which would be better. Rear light which plug isnt direct fit. Needs cutting and joining. Plastic part that sits on top of the seat latch is needed as it holds top cowl and lean sensor. Most other parts can be utalised from the gen4 like bolts etc.. Tank needs removing. Ideal time to change the shock or links or change air filter! Its not rocket science but its not easy and took me about 6 hours. Buy used pannels as it should have all the rubber grommets in it all ready.

@rishabhmagdum7494 7 жыл бұрын

a20rsx is it really not that simple ? How about front seat does it need to be changed ? Do I need to buy new Battery holder, ecu holder or just the undertray is sufficient?

@Yamaprilia 7 жыл бұрын

RISHABH MAGDUM riders seat is the same. undertray is battery tray. ecu is under petrol tank so not a problem

@MrBlade74 3 жыл бұрын

Hi. Im convertg it very soon. U mention the plastic part. Are you referring to the ECU BRACKET? Pls reply soonest. Tq