20160531184815 3 evo head valve job harley

Рет қаралды 35,671

8 жыл бұрын

Пікірлер: 37

@alexhenning3482 2 жыл бұрын

Thanks for the video! Did you fab that punch/"technical tap" tool yourself? Or pick it up from somewhere? Getting ready to install some on my 03 sporty and that would be super helpful.

@TatroMachine 2 жыл бұрын

some of the tools are custom made and some are purchased. most of my tools have been remachined by me inorder to work better. tatro

@warrennoble 2 жыл бұрын

@@TatroMachine hey buddy was it purchased or are you custom made it?

@mattcushing4978 6 жыл бұрын

I have a stupid question lol, what is the brand of your valve spring compression tool?

@TatroMachine 6 жыл бұрын

k-line as i recall. that was alot of years ago. i got one of the 1st ones i saw when they came out. tatro

@LyonhartZ2 4 жыл бұрын

Tatron how do I know if my used set of heads have a CC or Porting Job? also, how can I distinguish aftermarket valves or springs?

@TatroMachine 4 жыл бұрын

just look at them. my videos show the parts and what the machining looks like. tatro

@Richard5873 2 жыл бұрын

What would you call the tool at 6:31 in video ? I'm changing out valves tonight on my Harley.

@TatroMachine 2 жыл бұрын

that would be a valve seal installer. my home made one. tatro

@steveharvey2203 2 жыл бұрын

Question...some videos I've watched use lube on the valve guide before putting the valve seals on, some don't, some use the green Loctite, some don't... what's the right way?

@TatroMachine 2 жыл бұрын

just do what i show. lube and loctite. tatro

@VeritasEtAequitas 6 жыл бұрын

Anyone have a link to him doing a valve guide removal/installation?

@TatroMachine 6 жыл бұрын

go look at the twincam head job with the full porting and big valves. it should be in the tc playlist. tatro

@losteroni 3 жыл бұрын

I just got done replacing all my stem seals . The front exhaust seal was completely missing and all of the rest were just the metal shells . I can't imagine them being ingested so I think when the last person did the top end they just put it together that way .

@blazetaylor367 3 жыл бұрын

i realize Im kinda off topic but does anyone know a good website to watch new movies online ?

@jaidenkyng1033 3 жыл бұрын

@Blaze Taylor i use FlixZone. Just search on google for it :)

@kaibeckham8486 3 жыл бұрын

@Blaze Taylor I use FlixZone. Just search on google for it :)

@jonathaneagles7370 2 жыл бұрын

I drive a 95 xlh883 i have a ticking noise everytime my rocker pushes done on my exhaust valve in front jog. I put rocker lockers in. Pushrods are stock but there in mint shape. Checked my hydraulic lefters mint shape, checked my rocker no marks on them. Checked exhaust no oil leaks, no gas, pure carbon in exhaust part that connects to engine head, and never been any smoke out of the exhaust. Someone said it could be valve guilds. What is your opinion please???????

@TatroMachine 2 жыл бұрын

rockerarm bushings and gear tooth backlash cause a ton of noise when they get loose. loose valve guide and valve seats do too. try moving the lifter to a different location and see if the nosie follows it. tatro

@jonathaneagles7370 2 жыл бұрын

@@TatroMachine not rocketry bushings, bought a valve compressor taking valve off to check guild next. Someone had identical noise that I have, they said it was a lose piston fit. Never heard of that one, after checking valve I'm going to check that. Good thing about troubleshooting is I get to learn more about my bike. Question What do I look for with gear tooth??

@mrvass100 7 жыл бұрын

my inlet valve stem seals keep leaking 3 rd set after top end rebuild inlets only keep leaking,what do you think?

@TatroMachine 7 жыл бұрын

either you don't have a clue on how to work on a harley or you have some other problem. i would replace the rings and see if that fixes your oiling problem. tatro

@mrvass100 7 жыл бұрын

Tatro Machine Rings are new don't have a clue ,and oil on the back of the valves,I got the heads assembled from the shop turns out inlet valve stem to guide are loose as fuck

@TatroMachine 7 жыл бұрын

just because something is new does not mean they are working correctly. this is especially true when it comes to rings and cylinder finish. even i have problems with making all my jobs seal correctly. tatro

@jonathansanger4970 5 ай бұрын

I have a few questions 1 are you hiring? 2 do you like factory seals or James gasket better 3 any performance build videos

@TatroMachine 5 ай бұрын

hell no. mainly james stuff. you only have 6000+ videos to go. use the channel search and playlist functions. tatro

@mariomaldo25 7 жыл бұрын

would fouled plugs be a sign of bad valves on a fxstx ?

@TatroMachine 7 жыл бұрын

more like bad rings. do a leak down test and that would tell you which one it is. that is not a compression test. look up the difference. tatro

@mariomaldo25 7 жыл бұрын

thank you , would you happen to have a video of such .

@TatroMachine 7 жыл бұрын

@edm9527 5 жыл бұрын

Bloody hell, he's chucking those heads around on a harder Stainless Steel work bench. He should have a softer material on the bench. He's not working on my machine !!

@TatroMachine 5 жыл бұрын

look out, here is another know it all moron. it is a will used steel work bench. where is all the damage to the heads you think is going on. tatro