That’s awesome!! Glad it help you out, unfortunately for us we no longer have Q50 in the collection.

Right on… 👍

Yep, just piggyback off back plug wire for power. Just like you would back probe on a test light.

Hi Kevin I didn’t connect or add anything to wires, the wires came with pins connected to ends so able slide wires into back side of connector,, if your wires are bare you could maybe add some solder to tips of wires.

@@Milestyleokay, thank you

@@Kevin-zp6lyoh ya, forgot I did add some heat shrink to end.

@@Milestyle oh okay thank you

Mine is just flashing as well

I’m not sure we didn’t try on driver side, but see why not if find wires for brake light

Swap red wire onto green wire, and white to red. Work out better

I’m sure it would, work on 2017 q50

yes just did it on my 2018 q50. black to black red to red and white to green and all functions work. dont cut wires just do like him and push into the back of the connector

No you want white to red and olive to red, hope that helps

Are you asking about the wire colors?

Yes please

@@victorbravo4634want color wires black to black, white to red, red to green. Found that work for us. Hope that helps you out

@@Milestyle thank you so much!!

@@victorbravo4634 no problem sir

Just pull up plastics trim around back of trunk