2017 ZR 9000 Turbo Has Low Compression...Can It Be Fixed??

No video

2017 ZR 9000 Turbo Has Low Compression...Can It Be Fixed??

Рет қаралды 17,875

Күн бұрын

In this video Billy and I dig into his sled to see what the issue is with his motor and see if we can fix the reason why it has low compression. turns out the valves were all leaking worse than a screen door on a submarine!! I think with a good valve lap job and a new head gasket Billy's sled will be ready to rip this coming season out on the ice and should run some seriously fast speeds! and our buddy Kerry takes my F7 to get her ready for some grass drag events!! shout out to K&B Performance! the F7 is gunna freakin DANGLE!! 🤣🍻
As always thanks to everyone that watches,supports and subscribes to the channel! we really appreciate it and to everyone checkin out the merch
www.rednecks-dirtyhands.com
I hope ya's enjoy the video! cheers 🍻

Пікірлер: 117

@alancall5113 Жыл бұрын

MGD America gotta love it keep it coming

@rednecksdirtyhands Жыл бұрын

cheers 🍻

@Fluxpoint88 Жыл бұрын

Hey Pete, on my older small block Chevy stuff I just lightly attach the drill chuck to top of valve stem, gets the job done super quick, a guy could probably utilize that on that job as well if there’s room for that, and if not perhaps use a piece of thick transmission hose between valve stem and drill, these are just ideas lol

@rednecksdirtyhands Жыл бұрын

Good tip! cheers 🍻

@mikeeaton251 Жыл бұрын

Pete your so knowledgeable about what you do. Your f7 is gonna be wild can’t wait to see it 😀cheers 🍺

@rednecksdirtyhands Жыл бұрын

cheers 🍻

@richhowes-xr5ix Жыл бұрын

Great video Pete, looking forward to seeing your f7 at the grass drags and Billy’s sled back out on the lake!👍

@rednecksdirtyhands Жыл бұрын

Thanks 👍cheers 🍻

@James-Vining-333 Жыл бұрын

Obviously it is a little late to help you guys but I did both heads on a 2000 Dodge 5.9 magnum and I found using a battery powered drill worked amazingly well. it would of taken me forever and probably blistered both hands. Obviously for anyone never lapping valves before I do not suggest trying this but I feel you have enough mechanical aptitude to not destroy the valves. it has been 5 years now and the engine has over 260K (Miles) and if I remember correctly about 6 months ago I checked and the engine had between 143-145 PSi so it is still working great.

@rednecksdirtyhands Жыл бұрын

thanks for the tip! I'll giver a go 🍻

@neilsevery2209 7 ай бұрын

Can’t wait to see the F7 upgrades!

@jeremymullen5378 Жыл бұрын

🔥she’s Gona dangle forsure.. sleds to beat at grass drags we’re the srx 700 triples. This was years ago tho🔥👊🔥🔨🏍⚙️🚜

@rednecksdirtyhands Жыл бұрын

yessir! cheers 🍻

@adamarseneault5007 Жыл бұрын

nice to see the sled content ! love watching your vids! from New-Brunswick 🤟

@rednecksdirtyhands Жыл бұрын

Awesome! Thank you! cheers New-Brunswick 🍻

@paulbrown3180 Жыл бұрын

It sometimes helps to put a small spring under the valve and then it will pop up when you stop rotating . Good call on your joining up with K & B Performance

@rednecksdirtyhands Жыл бұрын

thanks! 🍻

@toddplenda5569 Жыл бұрын

Nice work dirty hands 👍

@rednecksdirtyhands Жыл бұрын

Thanks 🍻

@Copesthetic-Aesthetic 11 ай бұрын

This Eskimo was haulin ass on his sled right. Then all of sudden "bang" it quits runnin. So he takes it to the shop. The tech takes a quick look, and tells the feller. It looks like ya blown a seal. The Eskimo replies, no no that's frost in my mustache.

@rednecksdirtyhands 11 ай бұрын

🤣🤣 Nice One! 🍻

@rayharris5097 Жыл бұрын

Oh hell yeah Pete! Never too early in the summer to get ready for sledding... I started tinkering with the fleet last week. Bring on the snow!!

@rednecksdirtyhands Жыл бұрын

haha yessir! 🍻

@danagibbons9643 Жыл бұрын

Awesome video man can't wait to see that 7 grass dragging. Make sure u video it all.

@terryattewell5842 Жыл бұрын

You have a lot going on in your shop Pete, I wish I had your knowledge.

@rednecksdirtyhands Жыл бұрын

haha yeah there's always something goin on here!! cheers 🍻

@andrewteal3016 Жыл бұрын

If Amazon would put a square head on that spring compressor tool, a guy could get a socket on there with the Milwaukee/DeWalt and run them up and down quickly - speed the whole thing up.

@rednecksdirtyhands Жыл бұрын

not a bad idea right there! cheers 🍻

@jeffnicks2128 Жыл бұрын

I remember grinding valves in my uncles shop tedious job looks good Pete! Nothing beats an f7

@rednecksdirtyhands Жыл бұрын

You got that right! 🍻

@Brandonring1049 Жыл бұрын

I’m doing this same thing on my 2010 nytro right now pretty much same engine it’s going to be my first time I’m in New Brunswick first 4 stroke Yamaha for me

@rednecksdirtyhands Жыл бұрын

Nice One! cheers New Brunswick 🍻

@jman6030 Жыл бұрын

...you forgot the water lol..amen man 🍻

@rednecksdirtyhands Жыл бұрын

lol cheers 🍻

@ziggyz1750 Жыл бұрын

Cheers Pete

@rednecksdirtyhands Жыл бұрын

cheers 🍻

@BROTUNED Жыл бұрын

Another great video

@rednecksdirtyhands Жыл бұрын

thank you! 🍻

@gordonkellogg225 Жыл бұрын

Your a good competitive guy. Enjoy your videos, keep them coming

@rednecksdirtyhands Жыл бұрын

haha thanks! 🍻

@stevenbetteridge3548 8 ай бұрын

You mentioned North Bay! thats where i live, i got an 04 pro x2 800 setup with forged internals, jetted, clutched, slp single pipe, geared and its an absolute monster in a 500ft. if you're ever on lake nippising and wanna race im down whenever.

@rednecksdirtyhands 8 ай бұрын

Nice One! if we get up there I'll hit ya up! 🍻

@stevenbetteridge3548 8 ай бұрын

@@rednecksdirtyhands sounds good boss! Been a long time watching your vids favourite channel since I started!

@donnydenfeld2394 Жыл бұрын

Cheers 🍻 🥂 🍻 🥂 Pete. I love all your video content. Especially the sled stuff. It was because of you that I got my polaris edge 600 going. Pitter patter git at er.

@rednecksdirtyhands Жыл бұрын

Nice One! that's awesome..Pitter Patter 🤣🍻

@kingersgarage Жыл бұрын

I think the latest ARP kits come with a shorter bolt for that waterpump side one now. Great vid, I gave up on my sidewinder with head issues (not the good kind haha). Hope she flys again! 146 mph is moving pretty good!

@rednecksdirtyhands Жыл бұрын

yeah i haven't seen if they have a shorter one or not..but that would make sense! glad ya enjoyed the video and I'm sure it will make a good pass this season on the ice 🍻

@orionwarren4244 Жыл бұрын

Thanks for my weekly 'happy' fix, Pete! Beats $150/hr on the couch any day of the week😁😎👍

@rednecksdirtyhands Жыл бұрын

🤣 glad to help! cheers 🍻

@scottmente2244 Жыл бұрын

Great video Pete keep them comming yes snowmobile season is comming

@rednecksdirtyhands Жыл бұрын

thank you! cheers 🍻

@scottmcnabb9122 Жыл бұрын

Hey Pete I like that guys shirt Polaris lol. That will be awesome Pete see the f7 giver lol.

@rednecksdirtyhands Жыл бұрын

lol yeah I chuckled to myself when I saw the shirt 🤣 but he will definitely make the F7 Dangle!! should be pretty sweet! cheers 🍻

@timsolis4706 10 ай бұрын

How in the !#&! do you know all of this. You are definitely the Surgeon General of the Snow Machine World! Very Admirable.

@eastcoastguys5363 Жыл бұрын

Keep up the awesome videos! Absolutely look forward to seeing the notification that you uploaded a new video! I would however love to see more skidoos in videos lol 😆

@rednecksdirtyhands Жыл бұрын

haha I'm sure we'll get a few ski-doos in too!! 🤣🍻

@RayFMak Жыл бұрын

Awesome video, can’t wait for the next ✌🏻 Cheers 🍻

@rednecksdirtyhands Жыл бұрын

🍻

@johnlaluzerne1625 Жыл бұрын

Nice one Pete. Keep up the good work. At least you gave up that crappy Bud Light after all the hubub 🤣🤣🤣🤣 I am definitely ready to snowmobile....

@rednecksdirtyhands Жыл бұрын

🤣cheers 🍻

@larrywarner9314 Жыл бұрын

If those are ARP studs and washers those washers have to go a specific way if there's a taper on one side taper goes to the nut side , that's how they are on my head bolts and studs in my race engine

@jeffalleshouse9783 Жыл бұрын

Love the vid guys keep the sled s coming sno,s coming lol yeer haaaa!

@rednecksdirtyhands Жыл бұрын

haha cheers! 🍻

@billdwyer7897 Жыл бұрын

Grass Dangling is gonna be awesome with that fine looking Cat 😎👍🍺🇺🇸🇨🇦

@rednecksdirtyhands Жыл бұрын

yeah buddy! 🍻

@the4thj Жыл бұрын

oooww F7 Juice!

@AndroidBH1 Жыл бұрын

Awesome video. Put a link to the grass race event. I know where it is because my brother lives in Merrickville. My sister and brother all have Cats. We will check out the event and hope to see you and your merch there. 👍🏻

@rednecksdirtyhands Жыл бұрын

sweet! yeah i forgot to add a link for the event but I'll take a look! cheers 🍻

@gordonliddy9418 Жыл бұрын

Would've been a nice touch if you did the Ghost movie pottery scene with Patrick Swayze on the valve lapping part lol. Who would play Demi Moore?

@rednecksdirtyhands Жыл бұрын

lmao 🤣 Nice One! 🍻

@ericking9767 Жыл бұрын

SO CLOSE TO 20K SUBS...LET'S GO PEOPLE!!!

@rednecksdirtyhands Жыл бұрын

haha we're gettin close!!! thank you for the support!! cheers 🍻

@tedneitzel Жыл бұрын

Well if he beats yo mama you will have some work to do!!! Good stuff as always!

@rednecksdirtyhands Жыл бұрын

lol yeah it will be close I think but we'll see 🤪🍻

@mazdarx7887 Жыл бұрын

keep sing that fuel nd you'll have to get new valves and seats. Rig up a second tank, after a a run you can switch over to regular fuel(whatever grade it will run on), and maybe a touch of two-stroke oil. That is, if the plug will burn it, but it usually do unless you tweked the motor to the limits The race fuel is also hard on injectors, rings, cylinders, carbs, and fuel pumps, etc as it is very corrosive.

@ajbertelson9871 Жыл бұрын

60ftlbs final torque I wonder what was tighter, that head or Pete's sphincter.

@rednecksdirtyhands Жыл бұрын

🤣🤣🍻

@Upracefan Жыл бұрын

In 35 years of wrenching, I have never seen a cylinder head tighten from the outside inwards, that would be how you remove a head, always tighten from the middle outwards. I wonder if that picture you used was for removing the bolts?

@rednecksdirtyhands 11 ай бұрын

yeah seemed weird to me too but that's what yamaha says to do in the service manual....I guess we'll just have to cross our fingers and see what happens this winter lol 🤞 I'm sure it'll be fine...those fellas at yamaha seem pretty smart 🍻

@Jonbarton4444 Жыл бұрын

Great videos Pete! Why not just shorten up the stud near the water pump and thread it down to the same distance as the others?

@rednecksdirtyhands Жыл бұрын

thank you! yeah I suppose ya could shorten it up and make it the same hight...I gotta put some studs in the motor in YOMAMA so maybe I'll giver a go! cheers 🍻

@HIGHOUTPUTable Жыл бұрын

Awsome to see you guys teaming up .. Will you be posting the f7 content ? Keep up the good work ...

@rednecksdirtyhands Жыл бұрын

thanks! yeah we will definitely try to get some content of the F7 for sure! cheers 🍻

@bwyyy7306 Жыл бұрын

You make it look easy!

@rednecksdirtyhands Жыл бұрын

haha thanks! 🍻

@Thomasploeg1968 Жыл бұрын

Just remember, if Pete can do it, you can do it

@mattstewart4971 Жыл бұрын

Nice job pete..i wish i could bring the 800 renegade out so u could have a tap at it. Lol.

@rednecksdirtyhands Жыл бұрын

haha Nice One! cheers 🍻

@MusicSensations1971 Жыл бұрын

I think the F7 is going to beat your mama ! Slap her silly LOL

@rednecksdirtyhands Жыл бұрын

lmao 🤣 maybe... 🍻

@Ryfhoff 6 ай бұрын

Great vid! Think that cancer will come back however. I dont know if he runs race fuel all the time , but maybe a tune for 92/93, run it every other or something.

@rednecksdirtyhands 6 ай бұрын

yeah absolutely! need to run the regular fuel every once and a while 🍻

@JohnnyM515 7 ай бұрын

Hey Pete, your videos are excellent. You are making a big mistake though, you need a different beer, maybe something from the Rockies?😜😜😜

@jerrychase4177 Жыл бұрын

Hope Yamaha lets Arctic Cat Feature the Turbo 4 Cylinder Underdrive Engine.

@rednecksdirtyhands Жыл бұрын

now that would be awesome! 🍻

@densrx Жыл бұрын

did you notice that the valve springs have a up side. i mean the tighter coil goes down the head to prevent valve float.

@grantdubridge7995 Жыл бұрын

Is Stan going to write Polaris on the side of the F7?

@Brayden_Holmberg Жыл бұрын

I fucking love your videos man keep posting!

@rednecksdirtyhands Жыл бұрын

thank you! cheers 🍻

@chadpeterson-rf8yd Жыл бұрын

To bad I have multiple felonies, I have a zrt 600,zr 600 that's clutched studded and a hot rod chip, and a 2008 efi F7 heavy bore kit 907. Would love to ride with you 🎉😢

@johnjackson8561 Жыл бұрын

I like using egg cartons to keep the valve parts organized 😎👍♥️🤣🍻

@rednecksdirtyhands Жыл бұрын

good idea!! cheers 🍻

@larrywarner9314 Жыл бұрын

Pete locktite is a no no on head studs !

@TheJplevasseur 8 ай бұрын

Just curious if you made a part 2 of this

@rednecksdirtyhands 8 ай бұрын

not yet...🍻

@chadpeterson-rf8yd Жыл бұрын

Canada told me no bueno for entering

@dubbledub4588 Жыл бұрын

Boy, Pete sure does crack himself up, doesn't he? Ugh...

@rednecksdirtyhands Жыл бұрын

haha yessir! if ya can't laugh at yourself then what's the point 🤣 I'm just a happy fella 🍻

@marcopatterson2554 11 күн бұрын

How did you remove cam chain tensioner without tilting engine forward?

@rednecksdirtyhands 8 күн бұрын

it had a manual tensioner on it already so I just got in there with a bent wrench and was able to loosen it off 🍻

@MakinEndsMeet69 Жыл бұрын

Hey Pete question for you cuz you know a lot about snowmobiles motorcycles what not what is the standard horsepower on a 650 4 cylinder engine?? If you can please let me know I have one that is 70 horsepower stock