Yeah. You definitely should. Way easier and it’s so strong.

Anytime man.

👍🏻

Anytime man. Thank you.

Thank you man. I appreciate it. 👊🏼

Nice. Yeah it’s definitely a must in order to secure anything.

Great! I’m glad it helped you. 👊🏼

Thanks man. I appreciate that. 👍🏻

That’s awesome. They definitely add a nice touch.

Anytime. They try to up sell you on the rivnut install. It’s a waste.

@@HondaJon indeed! keep it up with the channel is growing!

Most definitely. It’s cause people like you who are great supporters is the reason. I really appreciate it. 👍🏻

Nice. Yeah these are perfect and don’t require any special tools.

I agree. Don’t use rivnuts. Not even needed. These are exactly what they are for. They don’t tell you about it though.

Thanks man for the support and info. I appreciate it. I will definitely work on shortening it down. Not sure 5 second but I’ll shoot for maybe 10 lol

@@HondaJon Yeah man. You seriously make messing around with my car that much easier since you try it out first :) Currently have the interior trunk lid sitting in my garage waiting to be installed because of you. As far as shortening up your into, I'm thinking you could attempt to include all of your caption in one or two still images, and make a super abbreviated version of your intro music. I could see it working well for you! Straight and to the point is the way to go. Lots of short attention spans on KZfaq haha

Thanks man. I’ll definitely give it a shot. I appreciate the advice 👊🏼

Just put a flat head screwdriver and tilt it. It will pop open

@@HondaJon Got it. Thank you so much. I really appreciate this video

Great. No problem 👍🏻

I don’t remember exactly but I believe most are so close and they stretch to fit. The accord has a wide trunk so most universal ones will do well.

Nice. Good to know. The dealerships usually charge outrageous prices for their accessories

I believe so. Check and see if you have a plastic cap in that general area

Definitely should. Check your trunk and see if uiu have two clips in those locations. If you do it will work perfectly

I don’t. It’s actually from a Ford F-150. Check it out on Oedro website. They should have it.

I agree. It works perfectly.

Brian Roelofs 08L96-TVA -100 Cargo net 18 thru 20 Accords

Yeah. It’s definitely tight. But once it’s in it’s in.

It’s in the description

@@HondaJon Thank you

@JC-zx7lq no problem

I just got it from eBay. It works perfect

Thanks man. I just got One from eBay. It’s a universal envelope style but has quite a bit of stretch so it can hold a bunch. And with these rings, it’s not going anywhere

@@HondaJon can you send me a link if you don't mind?

No problem. Check this one out. www.ebay.com/itm/273857746611 A little more but you won’t have to wait months for it 👍🏻

@@HondaJon this one doesn't seem to have velcro on the bottom part, did yours come with velcro?

Mine does but you don’t need it. You can easily hook it with these rings

As long as the hole is similar size it should work. You could always enlarge the hole to make it fit.

@@HondaJon Thanks, I'll give it a try!

Anytime 👍🏻

It’s just the oem honda one. It’s fits perfect. Only issue is it is slick. I use my cargo organizer though.

@@HondaJon ok cool thanks!

Anytime bro.

There’s no link. Just type in 2018 accord cargo net in eBay. You’ll see a bunch. Mine was $5. It’s great.

😝

You get two.

Moh Hall the instuctions say that but you don’t need to. The problem with that is if you go too far you can’t use these at all.

@@HondaJon Will this clip work on 2017?

That I’m not sure. Do you have a push clip in the same spot?

@@HondaJon I need to check on that, wife drove it to work today. I was ready to pull the trigger on a Picnic at Ascot 8033-Ht when I saw your video.

If it does I’m sure it’s the same size clip. Then it would fit. Be careful pushing the pin in. Maybe even file the edges of the hole down to make it a little easier

You simply use a trim tool snd pull them apart

@@HondaJon I can't for the life of me pull the d-ring pieces apart with a screwdriver. Is there a trick I'm missing? I have a 2021 accord.

There should be a little cutout. You have to wiggle the screwdriver back and forth and it will open. At first it is really hard to do.

@@HondaJon Thanks. I can't find an envelope cargo net with velcro on the bottom anywhere! I've looked all over Amazon. Looks like I installed the D-rings for no reason at all.

No worries at all. You don’t need Velcro. This would work better. It uses the hooks to go onto the rings and then the top loop uses the stock mounting point in the trunk. I might actually switch mine to this to cause a little bit easier to use www.ebay.com/itm/144001427721

I got it from eBay. Just search up envelope style. You can get the cheap. I paid $5 from China.

Just put that part number in at any Honda part stores. 08U20-TVA-100. I found the cheapest at my dealer since they are cheap parts and you don’t pay shipping

@@HondaJon okay im gonna check it out

This is simply for the side area. It only comes with 2 d rings. It’s not the kit for the cargo net but an easy way to attach the cargo net without special tools

It doesn’t. All you need is this and the net. Honda wants you to buy the kit

Jon, the Oem net is smaller than your aftermarket one. Like just for beach towels and snow scrapers. Out of the wish list of accessories, I had the dealer only install the net because the older kits required drilling at 4 points and I wanted the corrosion warranty to stay intact. They rivnutted just the two up by the speakers as shown in your video. For haulin tools, etc for work I use gray totes from homey depot.

Yeah but they use the same anchor points. A honda oem net will Work perfectly this way. It’s so strong that the plastic hooks would break before it pulls out of the side

Thanks

Hi Jon what is that part number on cargo net D hooks is it 08U20 TVA 100 before I order the Honda net and those clips Keep up the great work my friend