What you'll need and where you'll find the bolts and tabs to remove the bumper and headlights from a 2018-2020 Traverse.
Пікірлер: 27
@rydell20012 күн бұрын
Thanks for posting this. I did mine before but it was 4 years ago and now I want to access the front camera harness and change headlights to the blackout ones. Not alot of videos on the 2020 Traverse. I'm also having issues with a red triangle on my camera dash. Dealer changed VPM and a coaxial cable but stills does it.
@garylivingston90523 жыл бұрын
What a royal pain with all those clips and small retainers, a lot of work to remove a bumper and be careful not to break any tabs or clips.
@BrianScotland3 жыл бұрын
Thank you we had a similar issue with the grill and I will be replacing it at some point and using this video for reference
@RCINFORMER3 жыл бұрын
Thanks for the great video! I just subscribed! Our front camera got taken out by a rock. I only needed to remove the screws from the right side of the car and 4 underneath the front center to be able to pry the grill & cowl forward enough to replace the camera on the grill without totally removing the grill & cowl... Almost $250 for the camera at the dealer PLUS LABOR and a $150 BS diagnostic fee. You can get the camera for about $120 ish and replace it yourself with this great video you made! Thanks again bro!
@JPSurratt19863 жыл бұрын
Happy to help. Always good to put in a little work to save a lot of cash!
@rick_w3 жыл бұрын
Same thing happened to my wife's Travers, perfect shot to take out the camera. Did you have to reprogram the camera? My dealer said that is required.
@DarinSchuette2 жыл бұрын
@@rick_w Did you end up doing it yourself? My camera cracked after coming out of a warm carwash at nearly 0°F outside temps. Also wondering if that's "right" side as your looking at the vehicle aka driver's side or passenger?
@ExDeadman3 жыл бұрын
Thanks been looking for my 2018 equinox this works perfect ! 👍
@stevendomenech7405 Жыл бұрын
Excellent video
@Hamad.Kuwaitt4 жыл бұрын
Nice and helpful . Thanks
@mrvang80779 ай бұрын
I'm looking for a complete guide on how to remove the front grill from start to finish disassemble. NOT a picture of what it look like after.
@juan671911 ай бұрын
Nice very thoughtful
@misakomoko3 жыл бұрын
i still dont get it. i got traverse 2021 and i want to add a bug guard to protect radiator... this seems painful to remove grille
@bearsfootball704 жыл бұрын
Could u put up the actual removal process of the front fascia please. Also, how much was it for the fascia?
@JPSurratt19864 жыл бұрын
We bought the replacement on ebay for $150. I don't have the vehicle anymore; I was just helping a friend out so I don't be able to get anymore video for you.
@johnbriscoejr97385 ай бұрын
Question: Do you need to remove the front bumper in order to remove and replace front headlight assembly?
@JPSurratt19865 ай бұрын
Yes, unless you have really small hands. I explain that step towards the end of the video and show where the lower bolt is located.
@araakillian29573 жыл бұрын
video doesnt show how to removed the bumper
@asatira3 жыл бұрын
I need to change the grill on my 2020. Does the full bumper need to come off to get it out?
@JPSurratt19863 жыл бұрын
Everything but the center bottom bolts. You can lower the bumper down as the lower plastic is flexible enough.
@darincowen18613 жыл бұрын
I need to replace the grill on my 2018 Equinox. Do you know if I have to remove the bumper?
@1richardanthony3 жыл бұрын
I need to replace my radiator. Does the bumper need to come off or can it be replaced from up above? Thanks
@JPSurratt19863 жыл бұрын
I'm not 100% sure but it looks like you might be able to pull it from the top. I couldn't find any diy videos for this generation. Good luck!
@uribeh13133 жыл бұрын
Did you have to replace the grille air shutter?
@JPSurratt19863 жыл бұрын
No, just the center grill.
@sergioguerra9843 жыл бұрын
hi I need to buy a new bumper chevy transverse 2018 any information
@JPSurratt19863 жыл бұрын
www.ebay.com/itm/NEW-Front-Bumper-Cover-For-2018-2020-Chevrolet-Traverse-84088059-/184639997616?_trksid=p2349624.m46890.l49286 I suggest you try and find one at a salvage yard that is already painted. It would likely be cheaper than buying this one and painting it.