2018 Ram Promaster - Installing Rear Windows

2018 Ram Promaster - Installing Rear Windows - Locksmith Van Build

Рет қаралды 10,511

6 жыл бұрын

Rear Window Glass- Ram ProMaster Van - amzn.to/2zjmZkC
Glass Urethane Adhesive - amzn.to/2u2SESh
One of the things I wanted was rear windows on the new Promaster Van so I ordered some glass and start cuttin Randy has a unique hair action today :)

Пікірлер: 54

@sheexplores3472 5 жыл бұрын

Looks clean! Only thing I would recommend to others watching this for install advice would be to file you cut edges and paint them to prevent rusting! Otherwise straightforward!

@robertklein778 6 жыл бұрын

Big set of Balls, cutting up a new van.... :) Looks awesome

@RedneckGarage 6 жыл бұрын

hahahaha yeah how much could a new door cost if I screwed up ..... LOL

@altonriggs2352 6 жыл бұрын

Great Dave..now you can sleep out of the rain after Jennifer sees the video of herself on the patio!!!

@RedneckGarage 6 жыл бұрын

NOOOOO doubt Vern LOL

@wyattoneable 6 жыл бұрын

Stylish and practical. Nice work on the install Dave.

@RedneckGarage 6 жыл бұрын

Not sure on the practical after IM done hahahaha thanks bro :)

@dunlapmichaell 6 жыл бұрын

I'd have never thought installing a window was that easy....at least looked that easy.

@RedneckGarage 6 жыл бұрын

Really wasnt that hard at all M, biggest deal is cutting the hole :)

@wardperozuk2782 6 жыл бұрын

There were a couple of times that I was holding my breath waiting for the window to fall ! Lol. And, there can’t be too many Milwaukee tools left that you don’t have!!

@RedneckGarage 6 жыл бұрын

I have "most" of them LOL I thought about dropping it also - whew :)

@sixpacksandsrts9122 6 жыл бұрын

nice bud. your house looks amazing from the front. total difference

@RedneckGarage 6 жыл бұрын

It is "slightly " better hahaha Thanks for the kind words :)

@moabwheeling 6 жыл бұрын

Seeing out of the back is a good thing lol …. Great install Dave , cant wait to see more. Take care brother...

@RedneckGarage 6 жыл бұрын

Thanks Bro !

@saxdogg69 6 жыл бұрын

I think the van series will be good, keep em coming. Enjoying seeing how you build it out. Haha 12v hair dryer!

@RedneckGarage 6 жыл бұрын

LOL yeah Randy's hair was a bit off that day ..... like he had been ..... working - hahahahaha

@MarkDaisy 6 жыл бұрын

Love this! Dave, what vinyl trim molding did you use???

@farmboysgarage7595 6 жыл бұрын

Looks great! Probably wouldn't hurt to run a few 12V led lights in the back too ;)

@allisonrichards6622 6 жыл бұрын

Hi! We are going to install our rear windows and your video was helpful! Question for you: where did you get the rear window molding that you put in before the window? Ours didn't come with that and we are wondering if we are missing a piece or if we need to buy it elsewhere. Thank you!!!

@taapbfaapbtaapbtaapb7160 5 жыл бұрын

You said in the video that you had already ordered the side step. Do you have a video or the part? I need to install on my Promaster. Thanks

@fixinggrace 6 жыл бұрын

The Nissan at 3:41 looks like the back doors on my Transit Connect.

@RedneckGarage 6 жыл бұрын

I got a new door , just havent had time to paint it and install LOL

@bretthawton 5 жыл бұрын

I noticed you didn't use the recommended primer before applying the adhesive. Any problems? I'm asking because I just installed a side window using Sika's "primerless" P2G only to find out they also recommend using primer so now I'm worried that the bond may fail.

@Bern-a-hot-sandwich 3 жыл бұрын

crackin me up!

@joeymyopic 3 жыл бұрын

Hi dave , where did u get the glass from?

@MyGoogleYoutube 5 жыл бұрын

Maybe it is too late for you .... but man ..... hearing protection. It is a good idea.

@RedneckGarage 5 жыл бұрын

What ??? What ??? Speak up .... Hahahaha

@markdaisy948 5 жыл бұрын

Recently installed these and followed your video exactly (Thank you for posting this)! I’ve since ran into a “hiccup” with both windows leaking. I’m pretty sure I used more urethane than you, and am baffled. Did you run into any problems with leaking? Any suggestions to remedy?

@MyGoogleYoutube 5 жыл бұрын

Did you figure out the leaking issues?

@dutchmaninpa 6 жыл бұрын

hey dave,are you getting the locksmith package for the van or are you putting your own stuff in? man,I love these vans so much,wish the usa had a diesel though.

@RedneckGarage 6 жыл бұрын

They dont make the Diesel any more -at least for now, I bout a "Electrician package" made by Kargo Master then spent another 2K for additional shelves and junk - it is looking goooooood LOL

@RedneckGarage 6 жыл бұрын

the hvac took the longest time :)

@markgueren9633 6 жыл бұрын

Damn Dave !!! Looking svelte!!! How much have you lost? Keep it up!!! It must be the michelobe ultra!! Lol

@mazamike 6 жыл бұрын

Nice work, are you going to be installing dingle balls too? 😀

@RedneckGarage 6 жыл бұрын

Hmmmm - Im thinking about that LOL

@12vLife 5 жыл бұрын

@6:35 cutting metal hot with no eye safety? I'd like to install vintage black steel louvers with just a mosquito screen on the inside on a promaster city rather than cutting a vent in the roof.

@trollol_ 4 жыл бұрын

👍

@BackCountryWrenching 6 жыл бұрын

savage no safety shield while cutting....... boom disc explodes and takes Daves eyes out hahahahahaha

@RedneckGarage 6 жыл бұрын

Safety ? We dont need no stinkin safety ..... hahahaha

@BackCountryWrenching 6 жыл бұрын

the American Culture no work safety and no proper training for people in the trades. A company I worked for over a decade ago opened up a manufacturing plant in Texas building oil and gas equipment. I tell you trying to get skilled workers is extremely hard. A person can be flipping burgers at mcdonalds then buy a welding helmet and a chipping hammer and boom that person is a welder. Plus it seems most trades people down south seem to have some sort of criminal record or addiction problem. that's my experience and opinion

@mazamike 6 жыл бұрын

It's epidemic, acceptable, and spreading.

@gregherndon1633 6 жыл бұрын

yeah dave you'll get a lot of light with those tinted windows lol.

@RedneckGarage 6 жыл бұрын

I know right ? but truthfully it is more than you think - wihout any windows I felt like Helen Keller LOL

@gregherndon1633 6 жыл бұрын

that's why I like you Dave you funny lol.

@InternetDude 6 жыл бұрын

Save that sheet metal, that is good for patch panels.

@RedneckGarage 6 жыл бұрын

it actually is - very stiff :) ID - you know the thing to do for me is to "save something - the hoarder in me actually wanted the wrecked beyond repair Ranger hahahahaha

@InternetDude 6 жыл бұрын

Redneck Garage my dad is on his 3rd Ranger, he bought a new one in 2010 because they were going to stop making them. He still has it to this day, has like 30K miles on it. I even bought one new in 07. I have a real soft spot for Rangers too, they’re so good. Such a shame yours got wrecked.

@RedneckGarage 6 жыл бұрын

That is awesome about your dad - that Ranger will last him forever :)