No video
2019 2020 2021 GMC Sierra / Chevy Silverado Valence Wrap and Third Brake Light Tint
Рет қаралды 22,373
Күн бұрынIn this video I wrap the roof of my truck with VViViD Vinyl's 2020 Black Stealth Camouflage Large Pattern wrap. I also use Dark Smoke Tint by VViViD on the Thrid brake light
#tint #wrap #sierra
Contact me for questions, collaborations and product reviews:
linktr.ee/donslife - This has link to all of my products and discounts
Contact me for questions, collaborations and product reviews:
Instagram: / donslifechannel
email : donslifechannel@gmail.com
Product Links:
Viair 2.5 gallon air tank 150 PSI : amzn.to/3iacff7
Radenso Pro M Radar Detector : amzn.to/3EEz1oz
Universal Mirror Tap : amzn.to/3q8X9aB
Megulla Interior Ambient LEDs : amzn.to/3zjynbS
Under Hood Light Kit : amzn.to/3brYkOh
XPEL Paint Protection Film : amzn.to/3LjPaiW
Thinkware Q800 Pro here (US) : amzn.to/3MHTmtJ
Tailgate Step Lights US : amzn.to/3uucAwY
Tailgate Step Lights CAN : amzn.to/35ZQSr9
Auxbeam 3" LED Pod / Ditch Lights : shrsl.com/3nnvv (Code : Dons or Donslife)
Auxbeam 8-pod Rock Lights : shrsl.com/3m36a (Code : Dons or Donslife)
Auxbeam LED Switch Panel : shrsl.com/3m35z (Code : Dons or Donslife)
Rough Country 20" Black Series Dual Row Cree LED Light Bar w/Cool White DRL - 70920BD: - Out of Stock on Amazon
Putco 529005 Blade Quick Connect Harness For 2019+ Silverado/Sierra 1500: amzn.to/33EMvjX
amzn.to/3g8EGWB
Bilstein 5100 Front Shock Absorbers for AT4 & Trailboss amzn.to/3pgGVN7
Burger Motorsports BMS Stage 1 Tune (BMW) :
burgertuning.com/?rfsn=620226...
Dragy GPS Performance Meter :
dragymotorsports.com/?rfsn=57...
Fog Light Mod - GM Sierra : boostautoparts.com/
Get SLIPLO Here : amzn.to/3sjrZ0l
Exhaust : Here is a link for a louder version (ATAK) on Amazon. Mine is part 140774BC (BC = Black Chrome Tips). So many versions to pick from - do your research!
Borla-140775 Silverado/Sierra 1500 6.2L 2019 Cat Back Exhaust ATAK: amzn.to/3l9VYq6
AirLift 88388 LoadLifter 5000 for AT4 & TrailBoss : amzn.to/3wZnIQy
Air Lift 25980EZ WirelessONE Compressor : amzn.to/3y09CzI
BlueDriver Bluetooth Pro OBDII Scan Tool for iPhone & Android by Lemur Vehicle Monitors : amzn.to/3mtC8Vz
Veepeak OBDII Bluetooth Scanner for BMW/Bimmercode App: amzn.to/31V91kl
Veepeak OBDII Bluetooth Scanner 4.0 for BMW/Bimmercode App: amzn.to/31SIHaw
Hyperdip for emblems, wheels and trim: www.dipyourcar.com?ref=872
Plasti Dip for emblems, wheels and trim: www.dipyourcar.com?ref=872
Tint, vinyl, tools, and bolt on mods used on my vehicles products:
VViViD Premium Utility Blade (my favorite): amzn.to/39TIUP3
3M Knifeless Tape: amzn.to/3dHMlti
VViViD Smoke Black: amzn.to/3rXYno7
VViViD Dark Black : amzn.to/3d3tlH5
VViViD HEX+ Dark Smoke : amzn.to/3ae1bqW
VViViD HEX+ Light Smoke : amzn.to/2N18WHQ
Ronin Bullet Antenna Ford/Dodge : amzn.to/3mvoukM
Ronin Bullet Antenna Chevy/GM : amzn.to/3dMakYb
BMW Red M Buttons: amzn.to/3uuXyUS
BMW Red Start/Stop Button: amzn.to/3rZVuTg
Nextbase Dashcam HardwireKit: amzn.to/3mvpiGk
GMC Sierra AT4/SLT Chrome Grill Overlay (can be painted): amzn.to/3tcEdaZ
GMC Sierra AT4/SLT Chrome Grill Overlay Gloss Black: amzn.to/3wzalHI
Shine Armor Quick Coat Ceramic Coating: amzn.to/2OASS0j
DOSE Spider Silk: amzn.to/3h7v2EB
or VViViDshop.com
VVIVID Fuse 5 year 9H High Ceramics Hydrophobic Coating: amzn.to/2Rg1JFE
BMW F-Chassis BMS Hub Centric Wheel Spacers: amzn.to/322OTwF
BAK BAKFlip G2 Hard Folding Truck Bed Tonneau Cover: amzn.to/3qWuzLj
BAK BAKFlip MX4 Hard Folding Truck Bed Tonneau Cover: amzn.to/3s6rl4H
CTEK (56-926) Lithium US 12 Volt Charger: amzn.to/3gcuiP1
Richeer 1.5" Wheel Spacers for GMC 1500: amzn.to/3t4OJRn
Rexing V5 4K Budget Dash Cam : amzn.to/3Acvxou
Disclaimer: Some links may be affiliate links, meaning I earn a commission when you make a purchase. Thank you for the support!
Music Credits:
KZfaq Audio Library:
Retrograde, Stellar Wind, Groove tube
Island by MusicbyAden | / musicbyaden
Music promoted by www.free-stock-music.com
Creative Commons Attribution-ShareAlike 3.0 Unported
creativecommons.org/licenses/...
Epiphany by MusicbyAden | / musicbyaden
Music promoted by www.free-stock-music.com
Creative Commons Attribution-ShareAlike 3.0 Unported
creativecommons.org/licenses/...
@Donslife Жыл бұрын
linktr.ee/donslife - Links to all of my products and discounts
@ls5454ss 2 жыл бұрын
Nice work!
@samcrews3407 2 жыл бұрын
Glad you decided to do it!
@Donslife 2 жыл бұрын
Me too!!
@cqbninja3045 Жыл бұрын
I am working on the time myself but let me just tell you Don.. I have been stacking up vinyl, emblems, lighting, and just waiting for some time! Thank you so much for the great instructional videos!
@Donslife Жыл бұрын
You’re Welcome!
@Kriptonicvirus 2 жыл бұрын
I had my valance bedlined so I never have to worry about cargo rubbing against it and scratching it. Looks great 👍 👌
@Donslife 2 жыл бұрын
Not a bad idea
@heybucko3956 2 жыл бұрын
another amazing video!!!
@Donslife 2 жыл бұрын
Thanks 😊
@rdfcause 2 жыл бұрын
Looks nice 👌🏼👌🏼👌🏼
@brian5975 2 жыл бұрын
Beautiful
@michaelpanacheese604 2 жыл бұрын
Looks nice 👌 👍
@charlesroyal2545 2 жыл бұрын
Your a style genius
@Donslife 2 жыл бұрын
😂 I’ve never heard that one!
@carlohuerta129 2 жыл бұрын
Love it
@Donslife 2 жыл бұрын
Thanks Carlo!
@kevinscott8038 2 жыл бұрын
Savage!
@scottreynolds273 2 жыл бұрын
So wish I had more patience!!! I suck at wrapping, that’s why I pay to have it done.. Great job and look.
@Donslife 2 жыл бұрын
Thank you 🙏🏻
@adampallett8000 2 жыл бұрын
Tight!
@Donslife 2 жыл бұрын
Thanks Adam!
@c.j.pearson6191 8 ай бұрын
Figured that you would have a video for this! Great explanation on removing headliner. I’m planning to replace my 3rd brake light. Found a GoRecon that I like. I have never been a fan of how the stock red doesn’t match the tail light red. BTW, I ordered the Freedom Blade and it should be here in a few days( thanks for the discount code)
@Donslife 8 ай бұрын
Glad it was helpful!
@ChrisCarter-yq8gt 7 ай бұрын
Did you end up installing this? I am getting ready to do this same tail light install. Any helpful tips for the Recon brakelight install? Also curious did you seal the bolts with anything when re installing?
@Donslife 7 ай бұрын
I am not sure of you are asking me or CJ. For sealing the bolts I applied some caulking around the mounting holes.
@smokeypanduh 24 күн бұрын
Curious how you got the headliner back in? The two white clips with the blue inserts, I cannot get those to go back in. One of the white clips has ripped free from the headliner itself, plan on gluing it back. Wondering if you had any tips for the blue part to fit back into the frame? Back of my headliner is sagging now, everything else looks great tho.
@Bill-ck3lo 2 жыл бұрын
Looks great! And you definitely make these things look easy! What was the real time it took you to do this? Nice work!
@Donslife 2 жыл бұрын
Thanks Man! Easily 3-4 hours due to disassembly and reassembly. Faster if I didn’t have to film parts.
@brianquattlander1159 Жыл бұрын
Great video and now subscribed - Question.....Did you use RTV to "reseal" the bolts when re-installing the rear spoiler? Thanks so much for great content.
@Donslife Жыл бұрын
Yes I used a sealant for the bolt holes
@heathross3937 2 жыл бұрын
Any recommendations on wrapping the sharp edges/contours of the third brake light camera section? Should I heat the vinyl, lay it, and squeegee?
@Donslife 2 жыл бұрын
I found heating it while wearing a wrap glove 🧤 to push the vinyl into the contours worked for me. Then carefully cut out for the lenses. It was easier when I took it right off the truck with the whole valence
@heathross3937 2 жыл бұрын
@@Donslife Thank you! Love your videos. Very helpful!
@MichaelLucas77 10 ай бұрын
Did you replace the led lights with brighter ones or are those stock bulbs in the video?
@Donslife 10 ай бұрын
Stock integrated LED’s. The AT4 and Denali trim (to my knowledge) have integrated LED’s everywhere except the license plate.
@Jackseric Жыл бұрын
Love this video! Are the bulbs in the 3rd brake light already LED? I'm not finding much on replacing them so I feel like maybe they already are LED and not upgradable/replaceable.
@Donslife Жыл бұрын
Yes they are!
@Donslife Жыл бұрын
The only user replaceable bulbs are for the license plate. I made a video for that too
@Jackseric Жыл бұрын
I replaced my reverse bulbs with LasFit bulbs and wow what a difference. I used a lux meter app and it measured around twice the light. Not a perfect test but close enough. I figured I'd do the same with the cargo lights. Keep on making great videos!
@Jackseric Жыл бұрын
I've not played with wrap before so I'm off to watch all your videos involving wrapping things.
@Donslife Жыл бұрын
You can always practice with some samples before going for the final project. It can be tedious and frustrating especially if you mess up at the end. Check out ckwraps too. He has way more tutorials for free on his KZfaq channel
@sssssso0 7 ай бұрын
That the part number that you took off
@rich9382 2 жыл бұрын
Do you know anyone who has a video of a 2021 Chevy Silverado 1500 wrapping the taillights with the vinyl tint?
@Donslife 2 жыл бұрын
Sorry I haven’t and they don’t look easy
@smtheodore 2 жыл бұрын
This looks awesome! Just found your channel and can’t wait to watch thru some of them. Could that wrap have been done while the valance still attached ?
@Donslife 2 жыл бұрын
You could, but there are some pretty tight corners you might want the film to wrap around. But 100% doable
@jimmyfavereau 2 жыл бұрын
may I add ,from a fellow non factory trained wrapper, yes, by cutting the first piece with a sufficient over hang to cover the gap on the roof side, then cutting a second a second piece of film with sufficient over hang to cover the third brake light assembly.. from my experience, you have to find a way to avoid stretching over a valley for longevity of course, CKwraps was my teacher :D .. great job Don :D
@jrb5002 Жыл бұрын
Is there a specific torque for the nuts and bolts to put the valence back on? Or just by feel? I need to take mine to fix a leak. Thanks.
@Donslife Жыл бұрын
The answer is probably ‘yes’ but I went by feel. I also added some caulking to the the locations where the bolts pass through. Not an excessive amount either
@jrb5002 Жыл бұрын
All bolts and nuts for the spoiler are torqued at 53in/lbs. I got that from the dealer.
@Donslife Жыл бұрын
Good stuff! Thanks
@moozzyy_xxx4300 Жыл бұрын
This is off topic but Did you ever happen to have water leak from the rear window by any chance??
@Donslife Жыл бұрын
I didn’t before or after
@microcrawler69 6 ай бұрын
Is it possible to remove the 3rd brake light without pulling the whole splitter off?
@Donslife 6 ай бұрын
Unfortunately not. Not the built-in cameras version at least.
@devinbush7384 2 жыл бұрын
Did you have to do any seams on the valance?
@Donslife 2 жыл бұрын
Not with this specific vinyl. Some I would have used a seam
@smashit4690 11 ай бұрын
Looks good …. A Lot Of WORK THO
@Donslife 11 ай бұрын
I was up for it and the payoff was worth it
@urbanmechanic9254 2 жыл бұрын
Do you think the 3rd brake light could be done on the truck?
@Donslife 2 жыл бұрын
What do you mean? I applied some dark tint to the third brake light.
@urbanmechanic9254 2 жыл бұрын
@@Donslife yeah could it be wrapped on the truck or would it be best to remove the spoiler? Given that I'm not very familiar with wrapping but I have tinted lights with VHT paint before
@Donslife 2 жыл бұрын
@@urbanmechanic9254 now I follow. If you have the camera like mine, I think removal is better since that spot is a pain. If you don’t have the camera, it would be easy enough to do it on the spoiler. Lots of videos on that stuff out there. I do have a taillight tinting video in my AT4 playlist where I tinted it on the truck still.
@russk6865 2 жыл бұрын
Go to KZfaq truck ownership 101 he adds a center console phone charger you mentioned you might add one.
@Donslife 2 жыл бұрын
Yes sir! I think I have seen it!
@SuperPipita7 2 жыл бұрын
Any leaks??
@Donslife 2 жыл бұрын
No sir, I inspected the seal along the sliding glass assembly. It looked pretty good. At least I know if I ever experience a leak…. I can fix it myself and know it is done well.
@poorboyzandbiaspliez5374 6 ай бұрын
CAUTION ⚠️ These are single use tabs for the splitter! I have issues with mine leaking and I haven't even touched them. Just a psa to anyone doing this
@Donslife 6 ай бұрын
good point. I put silicone around each connection point. Had it off 3 times for various projects. No leaks.
@TEX-704 2 жыл бұрын
To much work, unless you pay someone to do it. JMO.
@Donslife 2 жыл бұрын
For guys like me it’s half the fun!
DONSLIFE
Рет қаралды 15 М.
What the Meowk!
Рет қаралды 3,4 МЛН
DONSLIFE
Рет қаралды 89 М.
LONESTAR HAWAIIAN
Рет қаралды 712 М.
DIY Andrew Flockhart
Рет қаралды 222 М.
JB Reviews
Рет қаралды 51 М.