This has to be one of the best "how to" videos I've seen. Plz keep making more.... God Bless
@lakesautomotivediagnostics65098 ай бұрын
Thank you thanks for watching like and subscribe
@Matthew.Wade272 ай бұрын
Yeah, so I feel like all I’m doing is bending the fuel rail as I’m trying to pull it up. Because it’s moving away at the top, but the injectors don’t seem to have moved at all.
@lakesautomotivediagnostics65092 ай бұрын
Sometimes injectors can be stuck pretty hard and be a pain in the butt
@alissayoung4116Ай бұрын
You may have to take the rail off the injectors. I bent my 4th injector rail bc it was so stuck. Had to drill a nail into it and yank it out with a chain. Definitely lube the new ones
@advancedleveldiagnostics Жыл бұрын
Great video, Thanks!
@lakesautomotivediagnostics6509 Жыл бұрын
Thanks brother
@TopFloorGaming2 ай бұрын
U could have at least put the description of the tools in the info cause I’m lost on what I need to take fuel injector bolts out
@lakesautomotivediagnostics65092 ай бұрын
Sorry bout that
@robertclark29352 ай бұрын
I heard him say 17mm for the connector to the fuel rail input...Also heard him say 4 mm allen wrench for the injector bolts to leave in what you dont want out.. everything else was 10MM ... Ive gotta do this my self in the next day or two.
@timvose593114 күн бұрын
Any suggestions for an injector that is really stuck? I've pried on it as hard as I can without getting it to move.
@lakesautomotivediagnostics650910 күн бұрын
Sometimes they can be a real pain in the butt sometimes you will destroy them getting them out you could try and buy an injector puller for your type of vehicle
@ft.aliyahhАй бұрын
Great video ! I’m looking to replace my fuel injector 1 myself, can I contact you personally & compensate you to walk me through the process? I have a 2019 Chevy Cruz
@lakesautomotivediagnostics6509Ай бұрын
Sorry, I don’t have a way to do that at this time
@adambalint35333 ай бұрын
Whats the torque spec on the fuel injector bolts?
@lakesautomotivediagnostics65093 ай бұрын
Hand tight
@rashadajohnson47165 ай бұрын
If the pressure sensor is still plugged up will it effect the way the fuel injector coming out ?
@lakesautomotivediagnostics65095 ай бұрын
Not sure I exactly know what you mean
@darkwarrior2012XBOX3 ай бұрын
I replace the fuel injector and gas flood the bottom where the injector are when I started it up. Did I not push something in right or do I need to add more seal to something? S.O.S.
@lakesautomotivediagnostics65093 ай бұрын
Sounds like you probably ripped a injector O-ring or did not get one in correctly. Sometimes when you pull the injectors out of the head, the Oring will stay stuck in the head. You will have to pull it back apart and inspect your O-rings.
@darkwarrior2012XBOX3 ай бұрын
@@lakesautomotivediagnostics6509 thank you the o-ring was needing to be replaced
@lakesautomotivediagnostics65093 ай бұрын
You’re welcome
@jacobcardenas32610 ай бұрын
I’m currently where I’m tryna pull out my fuel injectors but I’m having trouble tryna pull the clips out what tool did you use to pull them out with?
@lakesautomotivediagnostics650910 ай бұрын
Sorry, I do not know what clips you are talking about the rail bolts to the injectors
@Sombrita1023 ай бұрын
i think he means the red tiny clips you have to pull up to disconnect from the coils
@ImTheSandwichАй бұрын
Do you run the motor before putting the injectors in to aerate the fuel?
@ImTheSandwichАй бұрын
Or after
@lakesautomotivediagnostics6509Ай бұрын
After if you’re worried you got too much in there you could take the spark plugs out and crank the engine over
@fabianvalencia91693 ай бұрын
@ 9:33 you said gas went down into the cylinder, we’re you just blowing out excess dripping? And the pliers you use to disconnect the red clips from the injector, what are those called?
@lakesautomotivediagnostics65093 ай бұрын
Lisle 37960 on Amazon electrical disconnect pliers and I didn’t say anything about gas at 9:33. Maybe it was a different time.
@fabianvalencia91693 ай бұрын
My fault it was at 11:33 and you said quite a bit of gas went down into cylinder 1, did you mean where the spark plugs are or area where injector 1 was pulled from? Sorry the for mistake and we’re you just blowing out excess gas?
@lakesautomotivediagnostics65093 ай бұрын
@@fabianvalencia9169 when I pulled off the number one injector from the fuel real gas went down in there, so I was just blowing it out with the gun
@user-br6jv4mb7o8 ай бұрын
Do you replace the o-rings or only if needed.
@lakesautomotivediagnostics65098 ай бұрын
I usually only do it if needed, but it has bit me in the butt before and then I have to replace them anyways
@mmgg21527 ай бұрын
How did you seat the injectors in with out damaging the o-rings? @@lakesautomotivediagnostics6509
@lakesautomotivediagnostics65097 ай бұрын
@@mmgg2152 I use dielectric grease on just about every O-ring I install
@Hunnygaming. Жыл бұрын
Didn't kno they made those on. A hatchback
@lakesautomotivediagnostics6509 Жыл бұрын
🔧😃🔧
@johnmitchell8925 Жыл бұрын
That after market 😮airfilter. Not good
@johnmitchell8925 Жыл бұрын
How come nobody states the year and mileage when making these videos
@johnmitchell8925 Жыл бұрын
I believe all those bolts need to be torqued and not with an impact 😂