2019 Hobie Pro Angler 14 Rigged
Рет қаралды 57,729
Күн бұрынThis is an overview of how I rigged my 2019 Hobie Pro Angler for the 2019 season.
For wiring the FPV-Power pigtails - the brown wire is Positive + (red) and the blue wire is negative - (black)
Products list:
Hobie Pro Angler 14
www.summitsports.com/hobie-mi...
Lowrance Elite-12 Ti2
www.lowrance.com/lowrance/typ...
BerleyPro visor
www.mariner-sails.com/berleyp...
Lowrance Point-1
www.lowrance.com/simrad/type/...
NMEA200 starter kit
www.lowrance.com/simrad/type/...
Yak-Power System
www.mariner-sails.com/yakpowe...
Power-Pole Micro Anchor
www.austinkayak.com/products/...
BERLEYPRO JIG BUCKET EDITION SIDE BRO - 50MM DEEP POCKET
www.mariner-sails.com/jb-edit...
BERLEYPRO VAN BRO KIT
www.mariner-sails.com/van-bro...
FPV - POWER (NEW) LITHIUM 17.5 AH WATERPROOF KAYAK BATTERY & CHARGER
www.mariner-sails.com/inew-17...
FPV - POWER (NEW) PARALLEL PIGTAIL - (WIRING BATTERIES IN PARALLEL)
www.mariner-sails.com/paralle...
BERLEYPRO DUAL BATTERANG BRO
www.mariner-sails.com/dual-ba...
Anchor Wizard
www.summitsports.com/anchor-w...
3BR Powersports USB power port.
www.3brpowersports.com/index.php
@yakzen4120 5 жыл бұрын
Nice set up, appreciate you sharing your professional rigging. I don’t always agree with your systems, but I always enjoy your expertise and ideas. Good vid!
@yakzen4120 5 жыл бұрын
Ps: What a sweet Yak!
@danb531 5 жыл бұрын
Thanks Tim another great video. Only thing left to do on mine is come up with a better way to rig my anchor wizard. I have it on the base plate for now but it’s quit a stretch to operate it. The good/bad news is I have all winter to figure it out. Keep up the good work!
@Aesop101 5 жыл бұрын
Looking good Tim.
@parrycadotte957 5 жыл бұрын
Looks great Tim, good luck this year.
@TimPercyKayakFishing 5 жыл бұрын
Thanks, Parry.
@pitchkapizda8355 2 жыл бұрын
Genius set up 👍🏼
@robmanone 5 жыл бұрын
Nice Job Tim. Very clean.
@bryans7131 5 жыл бұрын
I really enjoy your vids Tim, especially your kayak rigging vids. I sold my 2015 PA14 last spring for a Compass, and ended up regretting that move. I recently sold the Compass and found a great deal on a used 2016 PA14, so this video is very timely as I get the PA rigged to my liking. I liked your use of the Geartrac bar clamps. I managed to find a couple of sets available online, and will add a set to the front rails and another on my H-Crate. I have a number of accessories that use a track mount, so this will be a good solution for me.
@TimPercyKayakFishing 5 жыл бұрын
I'm glad you find my videos useful.
@TheGoodoftheLand 4 жыл бұрын
Awesome job! That is one nice setup!
@TimPercyKayakFishing 4 жыл бұрын
Thanks, interested to see what you do next with the motors.
@Eelgnotsa 4 жыл бұрын
Very nice set up,Neatly installed.
@TimPercyKayakFishing 4 жыл бұрын
Thank you
@jvalencia8763 5 жыл бұрын
Awesome set up you got there Tim!! I’m getting a hobie PA 12. I like the way you have it set up. Would really like to see a video how you wired the yak power with the nmea 2000. Thanks for sharing these tips!
@BrianHillmanFishing 5 жыл бұрын
Awesome setup Tim!
@TimPercyKayakFishing 5 жыл бұрын
Thank you
@garrettcampbell5852 5 жыл бұрын
Great video and a super clean setup!
@TimPercyKayakFishing 5 жыл бұрын
Thank you
@iamraprap 5 жыл бұрын
thanks very informative! thinking about getting one!
@thelanda1091 5 жыл бұрын
Nice rig there mate!!! Great stuff.
@TimPercyKayakFishing 5 жыл бұрын
Thank you
@lmay07 5 жыл бұрын
You always have something new to add to the fun list....very nice.
@TimPercyKayakFishing 5 жыл бұрын
Thank you
@InocenteSandoval 5 жыл бұрын
Sweet setup
@TimPercyKayakFishing 5 жыл бұрын
Thank you
@RogerFordTheSmilingBassHole 5 жыл бұрын
OMG! Awesome! Inspiring.
@masfitnessoutdoors9657 5 жыл бұрын
That’s nice awesome setup
@TimPercyKayakFishing 5 жыл бұрын
Thank you
@timw3062 5 жыл бұрын
Tim, Great setup, how do you charge the batteries under your H crate. Do you have to remove the H crate and cover or can you charge from somewhere else.
@TimPercyKayakFishing 5 жыл бұрын
Depends on where I'm charging them. If I'm on the road at a tournament, I will take them out and bring them in to charge...I bring the H-Crate in anyways. When I'm at home, my PA's are in the garage; so I will unplug up front at the Yak-Power controller and plug it into the charger.
@garrettareiss 3 жыл бұрын
I watched your older video of doing the anchor wizard. Do you like the bar clamps or the h rail mounting plate better?
@TimPercyKayakFishing 3 жыл бұрын
Bar clamps with the t-track
@paulandresen8671 5 жыл бұрын
Great Vid, think I’m off the fence with Outback vs PA 12. Very nice setup !
@WuFaceProductions 4 жыл бұрын
which one did you end up buying?
@paulandresen8671 4 жыл бұрын
PA 14
@WuFaceProductions 4 жыл бұрын
@@paulandresen8671 why did you chose the 14 and not the 12? do you car top, bed it, or trailer?
@paulandresen459 4 жыл бұрын
I use a trailer for both the 14 and also my custom built. The PA 14 is more stable for my needs.
@thompsonhorses 5 жыл бұрын
Tim, Have you tested the run time with the 12 TI2 and the Point 1 with the two FVP's yet. Thanks
@TimPercyKayakFishing 5 жыл бұрын
Unfortunately I have not stress tested the batteries with the 12 Ti2 yet. I probably won't be able to until Spring.
@matmill1 5 жыл бұрын
Do you know if Lowrance units will require the voltage regulator from FPV? Or will you find out when you stress test? @@TimPercyKayakFishing
@TimPercyKayakFishing 5 жыл бұрын
@@matmill1 I've run my Lowrance Elite9 Ti without the regulator and had no issues. I recently ran the Elite12 Ti2 in demo mode for 18 hours without the regulator as well. I think the issue I had before was with the Carbon 9 with 3D StructureScan, between the unit, the hub and the Point1 it was too much draw without a regulator. So far I haven't had an issue without the regulator... and that's with the Point1 on the Ti and Ti2.
@chickenguru4 5 жыл бұрын
Nice clean install as always Tim. Question for you as I can’t seem to find out how to erase my tracks on my elite 4 chirp. Everything works but always shows on my map that I’m on st.clair. Thanks
@TimPercyKayakFishing 5 жыл бұрын
You can hide them or delete them. This video should help. kzfaq.info/get/bejne/isqBg8p8vc6Wp5s.html
@ghall1314 5 жыл бұрын
Awesome walk-through, thank you. How did you attach the yakpower controller to the cutting board?
@TimPercyKayakFishing 5 жыл бұрын
I have it mount with Yak-Attack Geartrac and rail mount. Unfortunately, they dont make the rail mounts any longer.
@ghall1314 5 жыл бұрын
I was actually wondering how the wire controller is mounted to the board that attached to the stern. I like the yakattack paddle holder method you used, but curious how you attached the controller to the board since there really is no way to run any hardware to it. Epoxy maybe?
@lawerancelanham 5 жыл бұрын
some of those command strips would work great
@dynamicfuzion 5 жыл бұрын
dope set up~! 2 thumbs up!
@TimPercyKayakFishing 5 жыл бұрын
Thank you
@Walt1119 4 жыл бұрын
Great series of videos, where did you go? No posts since this one.....
@TimPercyKayakFishing 4 жыл бұрын
Sorry, I was holding off and hoping to do a rigging video on the new PA 360, but the border closure stopped me from going across and picking it up. I have some fishing footage that I hope to organize and put some videos together. I have a number of components waiting to go on the PA 360 if/when I'm able to get it. If you have anything you would like to see let me know.
@ghall1314 5 жыл бұрын
Hi Tim, great walkthru! What do you use for a cart? Im about to buy my first hobie pa14 and am wrestling with how to cart it.
@TimPercyKayakFishing 5 жыл бұрын
I've been using the Hobie Fold & Stow Plug-in Cart for the past two seasons. I'm happy with it...it works in most conditions including packed sand...although it would have and issue with loose fluffy sand.
@ghall1314 5 жыл бұрын
@@TimPercyKayakFishing Makes sense to me. Glad you're happy with it. Trying to figure what to choose; Boonedox or Hobie plug in. Your opinion helps
@TimPercyKayakFishing 5 жыл бұрын
I've never had an issue using the Hobie carts. I have enough stuff on my kayak as it is, so I haven't seen the need to add additional weight. 90% of the time I just throw the cart back in my truck once I bring my kayak to the water.
@stevegrooms7543 5 жыл бұрын
Great Walkthrough! Did you have the Mighty Mouse custom painted or is that a decal from somewhere? Looks Great!
@TimPercyKayakFishing 5 жыл бұрын
Yes, Mighty Mouse is custom vinyl wrap that I had done by a local shop
@coachrobm 5 жыл бұрын
Tim Percy..your thoughts on the Boonedox Landing Gear voiding the Hobie Warranty? I didn't find out about this until after I bought my PA 14 this weekend. They, DE Paddlesports, said they installed a 9" backing plate. I have the latest Groovey model. I don't intend to load my kayak when launching/loading with the Boonedox Landing Gear, so hopefully I won't stress the screws and crack the yak. I hope being careful, and not loading the kayak while loading/launching will preclude any cracking. BTW, I'm installing all of the equipment you have in your video, less the anchor. You should make up some 'customized by Time Percy' stickers so I can stick one on my boat. I believe your setup is the best out there...very professional. Thanks again for all your help.
@TimPercyKayakFishing 5 жыл бұрын
Thank you. I don't use Boondox... I have no issue with the Hobie scupper carts. Between my weight and the other gear I have on the kayak...I don't need to add any unwanted weight :) I don't think you would have a warranty issue with anything else that doesn't relate to the Boondox install.
@TimPercyKayakFishing 5 жыл бұрын
I'm glad you got some use out of my videos.
@fishinpharm2991 5 жыл бұрын
Have you ever had a situation where you had to quickly release your anchor point? Curious as to how/if a quick release system can utilize the anchor wizard.
@TimPercyKayakFishing 5 жыл бұрын
I haven't had to yet. A quick turn of the Anchor Wizard handle will let the line free-spool.
@fishinpharm2991 5 жыл бұрын
Tim Percy Kayak Fishing good to know. Didn’t realize there’s a free spool function to the anchor wizard. Thanks for the clarification.
@tfs8271 5 жыл бұрын
@@TimPercyKayakFishing How do you use the storage for anchor when using the trolley? I would think you have to unhook every time you anchor up to stow the anchor?
@TimPercyKayakFishing 5 жыл бұрын
I will usually store it on deck while I'm using it or moving from one spot to the next. If I'm not sure I'm going use it, but want to take it out with me, I keep it in the front hatch.
@fishinpharm2991 5 жыл бұрын
Tim Percy Kayak Fishing seems like a lot of interest in the anchor options. Do I see a video in the future on how to utilize the various aspects ie. drift sock and what not?
@czwest7845 4 жыл бұрын
Tim how do Yack power button lights compare to Supernova strips?
@TimPercyKayakFishing 4 жыл бұрын
I've never used the Supernova, but I've used similar strip LED's on a previous PA. I find the button lights put out similar 'brightness' in a smaller footprint. I don't use lights on the exterior of my kayaks, unless you include the BerleyPro ORB 360 safety light. The button lights I have installed on the interior give me plenty of light when I need it.
@tcbridges 5 жыл бұрын
Ok, so that Hobie was about $3700 Now If I bought one what will it cost me to rig it up like you have your. I need to have a idea before I bit the bullet in the new Hobie. Thank You
@TheGoatMumbler 5 жыл бұрын
Nice rig. What does it weigh?
@TimPercyKayakFishing 5 жыл бұрын
Fitted Hull Weight: 120.5 lbs / 55 kg * Fully Rigged Weight: 144.5 lbs / 65.54 kg
@davidstemm9059 4 жыл бұрын
Tim why not the 360? Was that a conscious decision not to get that one?
@TimPercyKayakFishing 4 жыл бұрын
Wasn't available yet. I will have one for the 2020 season. With the amount of tournaments I do, it will be a 'must-have' for me.
@davidstemm9059 4 жыл бұрын
Tim Percy Kayak Fishing I had a 14 and sold it. Dumbest thing I ever did. My next boat will be a 14 360
@TimPercyKayakFishing 4 жыл бұрын
@@davidstemm9059 Hopefully I can get mine soon so I can start rigging.
@coachrobm 5 жыл бұрын
Nice Video Tim. I just bought a 2019 PA 14 and I'm having it rigged, myself, with everything you have. Can you tell me the P/N and where to buy the H Crate bracket for the Burley Pro Orb light? Also, can you tell me what port you have mounted on the kayak to buy that the Orb Light plugs into? I bought the Lowrance HDS Live 7 instead of the TI2. I heard there were a lot of issues/problems with the TI2. I'm going to pick up my kayak this weekend.
@TimPercyKayakFishing 5 жыл бұрын
The HDS Live will consume a fair bit more power than the Ti2. The mount I used is just the Hobie H-Rail accessory mount. I use the Yak-Power port kits to run the power back there and added the plug to the ORB with a bit more wire to give me the length I need to plug it into the port
@coachrobm 5 жыл бұрын
@@TimPercyKayakFishing Thanks for the quick reply. I did some calculations, based on the HDS Live specs, and determined that one of the two FPV 17.5Ah batteries I'm using will be sufficient to run the unit all day (between 7-10 hrs) along w/ the Point-1. I'm using the other FPV 17.5Ah battery to run the Orb Light, cockpit LED Lights, and USB charging ports. I was considering using it to run the Micro Anchor as well, but bought the Micro Anchor battery nonetheless. Thanks for the info on the Hobie H-Rail accessory for my Orb Light & the Yak-Power port kits. When I'm finished installing everything I'll take some photos and send them to you. I couldn't have done all of this without your help. Thanks again. Rob
@TimPercyKayakFishing 5 жыл бұрын
@@coachrobm The Power-Pole battery is the better option. Its surprising how much power it takes. I was blowing 3amp fuses when I tried it...switched to the battery pack.are going with the Yak-Power system for switches?
@coachrobm 5 жыл бұрын
@@TimPercyKayakFishing Wow, I'm glad I got it. I was originally thinking I would connect one of the FPV 17.5Ah batteries to it (the non-lowrance battery). Who would have thought a 3A load..even if it's only instantaneous rather than continuous load. Yes, I'm going with the Yak-Power system for switches.
@TimPercyKayakFishing 5 жыл бұрын
@@coachrobm I'm using the FPV-Power parallel cord to tie my two batteries together, then into the Yak-Power controller. I prefer having 35Ah as opposed to two 17.5Ah
@larrylindsey9766 4 жыл бұрын
How much is the kayak with all those accessories?
@TimPercyKayakFishing 4 жыл бұрын
I've never done a total cost.
@carlzilinski3210 3 жыл бұрын
I have to ask, where did you get the Mighty Mouse decals? That’s my nickname
@TimPercyKayakFishing 3 жыл бұрын
I had a local wrap company do them up for me. I first put Mighty Mouse on my 69 Camaro, 35 years ago....he's been with me ever since.....tattoo and on most my kayaks.
@jayny5472 5 жыл бұрын
Any update on yakpower...
@svglcx 5 жыл бұрын
If you were just going to install a Lowrance HDS- live with no other hardware, would just just hook up the positive & negative wires? I assume no need for wake up wire or listener/talkers. Thanks
@TimPercyKayakFishing 5 жыл бұрын
That's correct.
@svglcx 5 жыл бұрын
Thank you sir
@craftdinosaur9763 5 жыл бұрын
Nice video! I can daydream more toys now! Lol
@904fishingmusicandadventur9 4 жыл бұрын
wow, awesome set up... very informative.. I am in North Florida and fish the flats, so, some of that I wont need.. but i like a of what you have going on.. very nice, VERY FANCY.... just wondering, how much would that entire set up cost, out the door?
@TimPercyKayakFishing 4 жыл бұрын
What are you my wife? :) I've never sat down to figure out the total cost. I realize people are not going to need everything I've put on mine....I do a lot of tournaments with varying conditions, but I never go out with if fullly rigged, but I have needed everything on it at different times.
@904fishingmusicandadventur9 4 жыл бұрын
@@TimPercyKayakFishing LOL@wife... i was just trying to get a idea for how much it would cost to set us a cool system like yours.. but I have been doing some web searching... no worries... best wishes for continued success
@TimPercyKayakFishing 4 жыл бұрын
Once you get one, take it out and figure out the type of fishing you are going to do and what accessories you want to add. The good thing is, you can add a bit a time. The one thing I always suggest; buy the largest fish finder you are comfortable paying for. Next would be; buy a large enough lithium battery to handle all your future needs
@coachrobm 5 жыл бұрын
Hi Tim..sorry to bother you again. I installed my Berley Pro Orb light on my H-Crate. Looks nice. I also mounted a Berley Pro Orb Dimmer Switch below the light. I have a photo I can send you of my setup if you're interested in seeing it. I really like it. Anyway, the Dimmer switch came with two red wires. I assume I wire the dimmer switch in-line (in series) with my red/hot wire coming from my Orb Light? There were no wiring instructions. BTW, I mounted everything you mounted on your 2019 PA14, exactly the way you did. I couldn't be happier. The Tim Percy signature model. Everything is mounted professionally (by me) with the YAK Power Management System, Point 1 GPS, Lowrance Live 7 HDS, LED (red) lighting, 2 Yak Power Ports (external), Combo Voltmeter USB port, etc. Can't wait to try everything out this weekend. Thanks for all your help. Rob
@TimPercyKayakFishing 5 жыл бұрын
Robert, in glad my videos assisted you. Yes the just wire the switch inline with the positive. Now get out there and enjoy the fruits of your labor. ;)
@coachrobm 5 жыл бұрын
@@TimPercyKayakFishing I hooked up last weekend with some beauties (big smallies) on my home lake. Looking forward to catching some LMs this weekend. I'm already catching more fish per day from my new PA14 kayak than I did from my Skeeter Tournament Bass Boat. Must be the silent prop- sneaking up on em. haha Thanks again.
@TimPercyKayakFishing 5 жыл бұрын
@@coachrobm I have a number of friends that sold their bass boats after getting into kayak fishing.
@kevinbray5209 5 жыл бұрын
Hi I have trouble to find website Burley Pro want to get 360 safety light and other . I have 2017 Hobie PA14 love it
@TimPercyKayakFishing 5 жыл бұрын
Where do you live? Mariner Sails is the US distributor.
@TimPercyKayakFishing 5 жыл бұрын
www.mariner-sails.com/berleypro-orb.html
@TimPercyKayakFishing 5 жыл бұрын
Outside the USA. www.berleypro.com/product/berleypro-orb/
@kevinbray5209 5 жыл бұрын
@@TimPercyKayakFishing live in Maryland
@TimPercyKayakFishing 5 жыл бұрын
@@kevinbray5209 order through Mariner Sails
@dylanlewin2160 5 жыл бұрын
Do you get a new kayak every year? I wish I could afford just one lol
@LarryJohnson7 5 жыл бұрын
I think its a sponsor
@carloscasiano 5 жыл бұрын
🤩🤩👍👍👍👍💪💪💪💪
@jvandeEi1 4 жыл бұрын
Don’t make me sick but how much money do you have tied up in this rig?
@TimPercyKayakFishing 4 жыл бұрын
I spend a lot of time in my Hobies. I do about 14 tournaments a year on top of the many days I spend on the water recreational or practice fishing. The money I've invested in my kayaks is worth it to me, because I enjoy the time I'm using them. It cost me much less than investing in a boat setup... I have no interest in fishing out of a boat.
@GiuseppeBaselice 3 жыл бұрын
hello, nice design on the locker, is it a sticker or paint?
@TimPercyKayakFishing 3 жыл бұрын
You mean the Mighty Mouse? If so, it a vinyl wrap.
@GiuseppeBaselice 3 жыл бұрын
I would like to do the same design on my pa14 locker, could you turn the photo over? thank you very much
@TimPercyKayakFishing 3 жыл бұрын
@@GiuseppeBaselice I'm not sure what you mean by turn the photo over. I placed Mighty Mouse that way, because it looks better when the hatch is lifted up(open) and it looks correct when you are approaching people.
@GiuseppeBaselice 3 жыл бұрын
I'm sorry Tim. I'm using a translator and it doesn't always work as you can see. What I wanted to ask you is if you could please send me that mighty mouse logo so I could use it on my kayak here in Italy.
@TimPercyKayakFishing 3 жыл бұрын
@@GiuseppeBaselice Sorry, I don't have the file. The guy that did the wrap for me has it.
@JMD535 Жыл бұрын
Tim,...quick question,....how much Anchor line is on your Anchor Wizard? I'm debating getting one,...but some tells me I will eventually end up getting one after trying all the wanna-be-hacks! Ty
@TimPercyKayakFishing Жыл бұрын
The line that cane with it was a little thick and didn't allow as much on the reel. I had an old dive reel with thinner line on that I used to replace the Anchor Wizard line with. I don't recall how much I put on, but it was as much as it would handle.
@JMD535 Жыл бұрын
@@TimPercyKayakFishing Thank you. If I end up going with an Anchor Wizard,...I'll prolly just go with the 1/8" stuff from my Hobie Dealer. Thank you and TC...
@Expandacraftboats 5 жыл бұрын
All you need now is an Expandacraft 12 foot outrigger on that thing to make sure you never dump thousands of dollars worth of gear in the drink. Check out the number of youtube videos with that set up, with and without motors. Just search Expandacraft outrigger on a Hobie and you'll be amazed.
@edwardwatson6606 5 жыл бұрын
Gee ....We must have missed the WiFi, cable TV, satellite phone, VHF radio , radar and auto pilot
@TimPercyKayakFishing 5 жыл бұрын
I have a VHF radio (you can never be too safe) and the unit has WiFi... :) No TV, I don't even listen to music on the water. I'm on the water to get away from those distractions.
@coachrobm 5 жыл бұрын
@@TimPercyKayakFishing I too carry my Yaesu 2-way radio with me. It's waterproof/submersible. Agree, you can never be too safe. It's a good backup in case the phone goes tits up in an emergency. Plus, the radio has current emergency weather reports.
@montemurray4513 4 жыл бұрын
You're probably mad cause now you have to start over again with the 2020 PA12 w/ 360md
@TimPercyKayakFishing 4 жыл бұрын
It will be a PA14. ;) I enjoy rigging them, so I look forward to it.
@randl2000 5 жыл бұрын
Hello Tim, to start off, I love your videos. I'm a new kayaker and new owner of a 19' PA 14. Right now working on how I wanna rig this thing so I have a question. What do you think the benefits and cons are of a battery box and having your batteries mounted on the batterang. Also I'd like to get pics of your pelican 1200 build (vadrandl@gmail.com). Thanks for everything, you've been a huge influence on how I'm putting my PA together!
@TimPercyKayakFishing 5 жыл бұрын
The Batterang is a convenient out of way storage for the battery. You can start off with one 17.5Ah battery, then add a second one if you feel you need it. I will get you some better images of the Pelican setup later today
Hobie Kayaks West Coast Sailing
Рет қаралды 54 М.
BrandonHua.Fishing
Рет қаралды 6 М.
Southern Salt
Рет қаралды 33 М.
Blue Summit Outdoors
Рет қаралды 131 М.
Gig Harbor Fly Shop
Рет қаралды 4,9 М.