2019 Ram Cummins 22x12 Wheels with NO LIFT

Рет қаралды 45,652

4 жыл бұрын

My new wheels are finally here and wanted to put them on before my leveling kit was installed. This video is to show you can run a 20x12 or 22x12 at stock height without a leveling kit on a 4th and 5th gen ram.
THANKS FOR WATCHING!
Be sure to LIKE, COMMENT, and SUBSCRIBE!
Follow Me:
Instagram: coffey68
Snapchat: coffey68

Пікірлер: 53

@mikeyncali Жыл бұрын

Yeah they fit because you got the right offset. I wanted 33 or 35 on my leveled truck but my rims didn’t have enough offset so I have 305x55x20. 6:05

@Gsxrnoob 4 жыл бұрын

They match your trailer good

@TheCokeman1200 2 жыл бұрын

with 22x12s on -44 offset it wouldn’t hurt your paint?

@hugoamillcart2321 2 жыл бұрын

I have a 2014 ram 2500 and I already bought the 20 x12 wheels, what tire size do you recommend?

@CHAMP_theBULLDOG27 Жыл бұрын

I have a 2021 ram 2500.I bought 22x10 .will that be better ?as far as not installing leveling kit

@TheFunkstr1974 3 жыл бұрын

👍Awesome. I've been wondering if i could go ahead and put 22's on my rebel until i can get a lift kit. The wheel i want only comes in a 22x14. You said yours were 22x12. Wonder if that 2 inches will make it rub. Beautiful truck though. Thanks for the video.

@YamRida468 3 жыл бұрын

It will rub for sure but still drive able and manageable I have 24x14s on right now and daily it

@ricky2shoez215 Жыл бұрын

Looks awsome

@travisbittner4709 4 жыл бұрын

I think you need to reference the tire size, that ultimately is going to dictate the rub with a wheel that wide

@YamRida468 4 жыл бұрын

Travis Bittner I did 305/45/22 basically a 33 that’s 12 wide too

@soflolow4905 3 жыл бұрын

Would this be about identical to running a 20x12 with a 35” tire. Compared to your 22x12 23” tire?

@YamRida468 3 жыл бұрын

SoFloLow pretty close but not the same 33s to 35s. 2” more of tire same width wheel

@user-gr1fc7ep5c 6 ай бұрын

What would happen if you didn't remove those pieces from the rotor

@natedogg2122 3 жыл бұрын

Looks good

@YamRida468 3 жыл бұрын

Thanks!

@ilievfreitas1987 4 жыл бұрын

Sweet truck thinking of getting the midnight package on mine! Is that a Laramie or big horn?

@YamRida468 4 жыл бұрын

Iliev Freitas thank you! And it’s a Laramie

@flexing1013 4 жыл бұрын

Nice!!

@YamRida468 4 жыл бұрын

Flexing101 thanks!

@eliasmichalopoulos1595 3 жыл бұрын

In the video the truck was at stock height ? Just want to be sure before ordering wheels , I have a 2020 bighorn 2500 stock height , also if I was planning on running 33x12.5 would that be much more if a rub if any at all , thanks fir your time !

@YamRida468 3 жыл бұрын

Yeah stock height in this video, depends on rim size and width but should be okay

@TheTexasbro19 3 жыл бұрын

Damn now I want a white one!

@michaelt7396 3 жыл бұрын

Hey if you didn’t do such a negative offset would the wheels rub?

@YamRida468 3 жыл бұрын

Michael T correct they wouldn’t

@MrDanieljr21982 4 жыл бұрын

Once you install the leveling kit, no more rubbing?

@YamRida468 3 жыл бұрын

Daniel Gonzalez yeah it was good!

@ccld6435 4 жыл бұрын

What’s the offset of those wheels? I have a 2019 ram 2500 and I rub like a sob on the pinch welds with 22x12 -51offset.

@YamRida468 4 жыл бұрын

CC LD 22x12 -44mm offset

@jailbrakeking12 4 жыл бұрын

I have a 1500 22x12s on toyo proxy’s and I’m stock height and I only rub full crank

@YamRida468 4 жыл бұрын

Brandon jones that’s sweet! What size tires?

@jailbrakeking12 4 жыл бұрын

Coffey's Garage 33s street tires

@pounderish 4 жыл бұрын

Funny i just installed 22x10 -18os fuel contras red mill on my 19 blacked ram with nexen rodian hp 305/45/22 and rub the inner fender liner. Just heat gun tje plastic and violo.👍

@YamRida468 4 жыл бұрын

slayer calvelli that’s awesome! Haha

@CSmothersForge 4 жыл бұрын

“When torquing these down”....use a torque wrench?

@YamRida468 4 жыл бұрын

bunnystein223 nah impact works for me

@joncruz92 2 жыл бұрын

Tire name please

@dylanconquergood4915 Жыл бұрын

Think I'd be clear of rubbing with 22x12 -44 on a leveled 2500 with 35's?

@ndfarmbros 5 ай бұрын

Did you go with 35s and -44 on a leveled pickup? I am curious for myself.

@dylanconquergood4915 5 ай бұрын

@ndfarmbros I went with 33's on my 22x12's but I think I could have snuck 35's under it. Maybe would just have to do a tad bit of trimming on the inner fender well