2019 Ranger SuperCrew RhinoRack Backbone System with Pioneer Platform Install

  Рет қаралды 136,776

Stage 3 Motorsports

Stage 3 Motorsports

4 жыл бұрын

2019 Ford Ranger SuperCrew Rhino Rack Backbone System with Pioneer Platform - www.stage3motorsports.com/JB0...
2019 Ford Ranger SuperCrew Rhino Rack Backbone 5 Base Mounting System - www.stage3motorsports.com/RFR...
Learn more about this build - www.stage3motorsports.com/Sta...
______________________________________________________
SUBSCRIBE AND FOLLOW
YT Subscribe : / @stage3motorsports
FB: / stage3motorsportscom
IG: / stage3motorsports
Webiste: www.stage3motorsports.com/
Enter Stage 3’s latest giveaway: www.stage3motorsports.com/Giv...
Never miss a thing when you join the Stage 3 Newsletter: www.stage3motorsports.com/Sta...
Grab a Tee Shirt or Sticker - www.stage3motorsports.com/Sta...

Пікірлер: 63
@AlwaysSearching..
@AlwaysSearching.. Жыл бұрын
I can’t believe ford made it this hard to install a roof rack? No factory holes to mount to? Wtf
@gilstrapm01
@gilstrapm01 4 жыл бұрын
I appreciate the fact that you used PPE to make the cuts. There are so many install videos where people don’t.
@stage3motorsports
@stage3motorsports 4 жыл бұрын
We try to do our best man, thanks for pointing it out!
@datadiving
@datadiving 4 жыл бұрын
How did u fix the roof tent so tight to the car? There is no gap between tent and car right?
@Troche571
@Troche571 4 жыл бұрын
Just subscribed, great content. What do you recommend can a solution for the trucks that have the WiFi/Satalite attena mounted on the driver's side / rear corner?
@tatasayeng
@tatasayeng 3 жыл бұрын
how much height does it add compare to the stock rail?
@xamesm
@xamesm 4 жыл бұрын
Any chance the backbone system will be available for the F-150?
@daniellonghorn4612
@daniellonghorn4612 3 жыл бұрын
Wouldn't it be easier to just pull the whole rain gutter rail out then trim off end pieces you may want to reapply? They're only cosmetic right?
@aussieman3582
@aussieman3582 2 жыл бұрын
Yes can cut with angle grinder. Take the whole rail off.
@Cous1nJack
@Cous1nJack 4 жыл бұрын
Why didn’t rhino make the rail the full length to replace the whole extrusion?
@tannermarley998
@tannermarley998 2 жыл бұрын
I know Im asking randomly but does anybody know of a method to get back into an instagram account? I was dumb lost my password. I appreciate any tips you can offer me!
@kasekeaton2995
@kasekeaton2995 2 жыл бұрын
@Tanner Marley instablaster =)
@tannermarley998
@tannermarley998 2 жыл бұрын
@Kase Keaton Thanks so much for your reply. I found the site through google and im trying it out now. Takes a while so I will reply here later when my account password hopefully is recovered.
@tannermarley998
@tannermarley998 2 жыл бұрын
@Kase Keaton It did the trick and I finally got access to my account again. I am so happy! Thanks so much you really help me out!
@kasekeaton2995
@kasekeaton2995 2 жыл бұрын
@Tanner Marley you are welcome :)
@seanando800
@seanando800 4 жыл бұрын
Can you put a longer platform on or is the backbone restricted to the 1528mm long platform? I really would much rather have the 1928mm on top of my ranger
@tobeycoon8019
@tobeycoon8019 2 жыл бұрын
Hey mate did u find anything better, I was also wondering why the rack was so short
@ChrisPBacone
@ChrisPBacone 2 жыл бұрын
I'm going to invent a soft clamp mount on the upper window roof struts. Instead in the factory rail or channel. It'll be on the outer body of the roof frame, only utlize the back bone for a structure feature
@as752
@as752 3 жыл бұрын
I would probably seal up the top of the rivet too, just in case.
@fasfgasdfagadsf
@fasfgasdfagadsf 4 жыл бұрын
So how does this roof rack effect the rollover safety?
@m0r0gu3
@m0r0gu3 2 жыл бұрын
How does adding fuel to a fire affect (not effect) the fire?
@shreckm6470
@shreckm6470 3 жыл бұрын
They are good rack but the wind noise and buffeting is huge. Mine came off within a week.
@TruckStuff1
@TruckStuff1 4 жыл бұрын
Thats gonna be a "nah man..." from me.
@ausguy4385
@ausguy4385 4 жыл бұрын
The cost to repair any damage will be 3 to 4 times the amount saved getting it done. Plus insurance will eat you alive if it fails and was diy.
@bigsterms
@bigsterms 3 жыл бұрын
I agree. I see leaks in the future.
@jhayt4r
@jhayt4r 3 жыл бұрын
yup kzfaq.info/get/bejne/m7OoZZZjzce2qaM.html this guy had a pretty bad incident with this rivet install.
@Drewski460
@Drewski460 4 жыл бұрын
How much louder is the wind noise inside the truck? Any big change or is it acceptable? Thanks!
@NoahStage3
@NoahStage3 4 жыл бұрын
Good question. The rack does create some wind noise in the cab, but the sound is tolerable. It doesn't tend to howl or whistle so the noise is mostly just a low rumble of air being disrupted as it rolls over the top of the truck. The sound seems to be comparable to almost any other flat utility rack I've ever driven with, but it may not be everyone's cup of tea depending on how much they value a perfectly quiet cab. Hope that helps!
@shreckm6470
@shreckm6470 3 жыл бұрын
Wind noise is bloody huge because it comes so far forward and all the wind going up windscreen go's straight under the rack. Fuel consumption go's up considerably.
@thealterator
@thealterator 3 жыл бұрын
@@shreckm6470 The fuel consumption will go up regardless of the rack. If you want to save on fuel, consider not getting one? The wind noise can be mitigated using wind fairings or even putting in a light bar.
@tomchong2851
@tomchong2851 4 жыл бұрын
can the rhino roof tray fix on normal cross bar?
@stage3motorsports
@stage3motorsports 4 жыл бұрын
Yes you'll just need the proper kit, give us a call for more on this setup! 623-434-5277
@72xafalcon
@72xafalcon 4 жыл бұрын
Sucks to be you guys in the states, as our rangers in Australia the channel rails from the factory are made of rubber, so much easier to get off and cut and did anyone notice he didn't vacuum out the roof lining where the curtain bags are, they aren't that hard to pull down
@georgeali1953
@georgeali1953 4 жыл бұрын
Saw that!
@legion1630
@legion1630 3 жыл бұрын
Was the usage verdict..does water leak thru
@stage3motorsports
@stage3motorsports 3 жыл бұрын
No leaking on this setup!
@KrappiePB
@KrappiePB 4 жыл бұрын
How strong is the rivits? normally rivnuts is the norm.
@NoahStage3
@NoahStage3 4 жыл бұрын
The rivets seem to be plenty strong enough to secure the channels to the roof. We haven't had any issues with them coming loose, rattling or leaking after multiple off-road trips and camping trips over the last 6 months.
@jhayt4r
@jhayt4r 3 жыл бұрын
@@NoahStage3 not according to this kzfaq.info/get/bejne/m7OoZZZjzce2qaM.html
@supabryan83
@supabryan83 3 жыл бұрын
Do they make the tracks for the f150?
@stage3motorsports
@stage3motorsports 3 жыл бұрын
unfortunately they do not
@1431darkblood
@1431darkblood 4 жыл бұрын
Aw men I want it to have a that Rhino Rack but I wouldn't dare someone put hole on the roof o.o
@jameslewis6998
@jameslewis6998 4 жыл бұрын
Feel you
@zaintlouis
@zaintlouis 2 жыл бұрын
You should let us know kung anong mga pinagkakabit baka may matipuhan kami na dustong bilhin.
@boostedmule2201
@boostedmule2201 4 жыл бұрын
Too bad they are not affiliated with affirm! Cant afford to buy out of pocket 1300$. Looks good I like it
@stage3motorsports
@stage3motorsports 4 жыл бұрын
We've actually just recently introduced affirm on our site which you can now use to purchase great products such as this RhinoRack System!
@coloneljessup5949
@coloneljessup5949 3 жыл бұрын
Then maybe you shouldn't be buying it at all...
@cd7059
@cd7059 3 жыл бұрын
They break to easy
@RefurbishedBacon
@RefurbishedBacon 4 жыл бұрын
Hmm well the install doesn't seem that bad, I mean it would be a permanent part of my truck forever anyway.
@capt_crunchy_nut
@capt_crunchy_nut 4 жыл бұрын
Attaching the tray to the backbone rails is an ABSOLUTE pain in the ass. He says "a little bit tricky" but what he means in impossible. The T bar part has nothing holding it even remotely tightly in place and you can't hold it with your fingers while you out the bolt in. Worst thing I've ever tried to do.
@ChrisPBacone
@ChrisPBacone 2 жыл бұрын
It's called a counter bore for a pilot hole if your drill walks. You need more silicone to "waterproif" a f..k up
@jmoore9806
@jmoore9806 3 жыл бұрын
Poprivrrts ? Yeah na no thank u
@TheAleanic
@TheAleanic Жыл бұрын
Rivet Not strong enough
@Bobbydell
@Bobbydell 28 күн бұрын
Don't ever fly again. 😂
@legion1630
@legion1630 3 жыл бұрын
oh i see; there is no drilling into the roof ...thats ingenious
@DigitalAwareness
@DigitalAwareness 3 жыл бұрын
Drilling holes in the roof is a stupid design. no thanks.
@user-qf8bw5lw5f
@user-qf8bw5lw5f 2 ай бұрын
I think it is a complete and utter JOKE that Ford (and many others) do not have these holes completed in the factory. Hard to believe in 2023/24. Unbelievable in fact, 'yeah lets just drive a whole heap of holes in my $70,000 to $100,000 new ute'. Ridiculous.
@ChrisPBacone
@ChrisPBacone 2 жыл бұрын
Found on road dead
@ChrisPBacone
@ChrisPBacone 2 жыл бұрын
Ford - fix or repair daily
@ChrisPBacone
@ChrisPBacone 2 жыл бұрын
Find other repairs dummy
Rhino-Rack | Ford Ranger P703 Backbone and Pioneer Installation
8:34
Inside Out 2: Who is the strongest? Joy vs Envy vs Anger #shorts #animation
00:22
Mama vs Son vs Daddy 😭🤣
00:13
DADDYSON SHOW
Рет қаралды 46 МЛН
Задержи дыхание дольше всех!
00:42
Аришнев
Рет қаралды 3,7 МЛН
My Basic Ford Ranger Is SO MUCH BETTER with this Easy Upgrade!
11:14
The Fast Lane Truck
Рет қаралды 43 М.
Rhino Rack Backbone install 2021 Mazda BT50
10:24
Luke Willing
Рет қаралды 9 М.
Jeep Roof Rack Installation and Review - Rhino Rack Backbone
12:43
2019-2020 Ranger Raptor Style Complete Grille Kit Install
7:37
Stage 3 Motorsports
Рет қаралды 134 М.
Ranger Roof Rack Install
29:28
JcrOffroad
Рет қаралды 17 М.
Yakima LockNLoad Roof Platform Review
7:16
Wasting Time In The Woods
Рет қаралды 53 М.
Every car need this.#car #carhack #shortsyoutube
1:00
Chaudery Auto Traders
Рет қаралды 6 МЛН
Китайские свалки новых авто и велосипедов
1:00
Girl Made E-bike From Scraps of Wood homemade #woodworking
1:00
ND-WoodArt
Рет қаралды 3,5 МЛН