Finally a build bigger than 2 inches. I’d like to see this with 42 inch tires as well as a build with 44 and 46” tires. Why? Because no one is doing it that’s why. And to show it can be done. It would get a ton of likes
@williampeterson14007 ай бұрын
It can be done but you need to upgrade the rear gear to 4:88 or 5:13. Probably also need to upgrade to Dana 60s or larger
@samhouston52173 ай бұрын
@@williampeterson1400 Definitely to both, 5.13 and Dana 60's.
@carlabbott56934 жыл бұрын
Awesome, this is what I plan to do with my gladiator . You guys rock 😎
@cristianr22964 ай бұрын
With a little video magic
@wranglerruh32393 жыл бұрын
It looks so amazing 🤩
@walterbonagua446 Жыл бұрын
Nice lift..well explained
@theblackmohawk58133 жыл бұрын
That’s a nice lift
@off-roadingexplained84172 жыл бұрын
And it's gonna need it !
@edward33424 жыл бұрын
I went with the RC 3.5" on my sport and it seems almost identical. I wonder if RC sent me the wrong size lift. LoL
@reneanzaldua39099 ай бұрын
I just got this lift kit installed on my 2023 rubicon gladiator, the front drive shaft dont look snugged up like that one, when am in 4h it dont let my jeep turn correctly, its hops😢is there anyway i can get of hold of you guys for questions cause the shop who installed it are a bunch of jokes
@anthonym52673 жыл бұрын
Do you need to replace the front track bar or is that something that can be done at a later time? I just want to make sure it’s not required for installation.
@samhouston52173 ай бұрын
Did I miss it? About how much for everything labor included? ball park? (jeep Mojave here)
@statenmorgan9624 жыл бұрын
I’d like to see someone go bigger than a 6” kit on a Gladiator. I don’t think anyone has done it yet.
@CJBroncoF1504 жыл бұрын
That would be huge!
@JamesM0M3 жыл бұрын
Gladiator forums, guy did 8” long arm on 42” tires
@dirtyrotter40576 күн бұрын
Love to know your l/100km
@johnnygto40004 жыл бұрын
What is overall height of vehicle? Wanna fit it in my garage.
@traviseinertson20602 жыл бұрын
Can you clarify direction of front shocks? Instructions state to have eyelit offset to outside of vehicle. Thank you
@koppogunz2959 Жыл бұрын
So I can’t have a after market exhaust with this kit?
@bigalforsyth3 жыл бұрын
Why wouldnt RC have those holes already built in rather than drilling out on-car??
@themanthelegend70483 жыл бұрын
I hate replacing aluminum bolts with steel ones being in Ohio where there's salt on the roads.
@guidok37624 жыл бұрын
Nice install but 37” tires are to small, bigger is better ! Greeting from The Netherlands
@CJBroncoF1504 жыл бұрын
Thanks for the comment, i think we'll go bigger once we have some aftermarket fenders!
@bigalforsyth3 жыл бұрын
does it address proper caster angle in front and proper pinion angle in rear?
@butchvaldes32282 жыл бұрын
Did the kit NOT come with the Control arm drop brackets?
@pijv62894 жыл бұрын
Looks like a monster. Do you recommend re-gearing?
@JerseyStyle74 жыл бұрын
Jimi V562 I think for 40 inch tires you have to re-gear I just got my JL done 4 inch Clayton lift with 37 inch tires and the guy says I’m OK unless I do 40 inch then I have to re-gear
@pijv62894 жыл бұрын
Thx for the info 👍
@CJBroncoF1504 жыл бұрын
For 37's it would definitely help!
@mattberndt33082 жыл бұрын
can you use the stock front track bar or do you have to buy a adjustable one for this kit?
@garretmonnet93973 жыл бұрын
This work on the ecodiesel as well or different springs needed
@truckertavis3 жыл бұрын
Hey I’m about to install this kit. I’m super nervous. Was drilling necessary or just extra reinforcement? What were the specialty tools I will need again?
@carlossanchez18123 жыл бұрын
Can you please tell me how it feels? I’m thinking of getting the same lift kit now.
@caidensmith28393 жыл бұрын
Any tips I’m about to do it to
@truckertavis2 жыл бұрын
@@caidensmith2839 didn’t install it. Took it too a shop.
@bhaddox1ify4 жыл бұрын
Should have left the rear rubber spring isolater out so u could get away from the God awful factor take they it has
@JEEPIMPACT4 жыл бұрын
Will I need to make that cut 16:00 with a Rubicon
@CJBroncoF1504 жыл бұрын
I would suggest just opting for longer sway bar links from our website, you have a disconnecting front sway bar and this would be doing the same thing.
@themanthelegend70483 жыл бұрын
Man why do lifts gotta be so expensive? Rough country "hold my beer".