You guys aren't hurting for money... keep that economy going!!! Great videos and please let me buy your used bikes if you're reselling them... love the mods

I see a lot of people saying ,what about the warranty. Harley warrant sucks! I bought a 2019 rgs and rip it right apart 128 S&s kit D&D with the 550 cam trask air filter. You spend close to $30,000 on a bike and they give you a 2 year warranty lol .good for you guys the bike sounds awesome!

Looking forward to the SS cam install video! Keep’em coming!

You have the best road glide videos and Iv learned a lot and have purchased a lot for my RG from your page 👍

The factory paint Job on on this one is awesome

Fuel Moto is great, I bought my jackpot head pipe and power vision from them. The D&D pipes sound great and the performance is great too. To bad it voids the HD Power Train Warranty. Now you need to get the 13" Revo shocks from Legends they make a huge difference in the ride. Stock RGS has 12" shocks but the Legends 13" work great and don't change the ride height.

Have to say that is a beautiful bike. Great video, I ran D&D’s on a Electra Glide man they were loud. Like the dummy for a two into one, makes it look more symmetrical from the rear. 👍🏼

Great job sounds great. I just cant get my head around having a dummy ghost pipe. I have a new road king special and I wish it came with standard bags so I could run a two into one thunder header. A dummy pipe to me is like putting a hood scoop on a car and not cutting a hole in the hood, I just couldnt do it. I know a two into one makes more power but i would rather leave one bag without a pipe in the cut out than have a fake pipe. Thats just me tho and I love dads bike, beautiful!

Wow! Your Dad & I have the same bike! Color scheme and all! Someone recommended the D&D and I wanted to find a YT vid with an RGS & D&D install. So here I am!

Looks nice! I definitely prefer the slant cut tips though.

Oh yeah I love the 3 or 3 1/2” pipes much better than the 4 1/2 “ it’s just look good and not cramped up , thanks for sharing

My d&d pipe came without instructions, so here I am lol

That color in the sun is so sweet!

The bike sounds and looks fantastic. Anthony, your dialogue is getting better, so keep it up. Be mindful not to repeat yourself or use the same transition words over and over again (easier said than done, I know...) Here's a shout out to your Pop's...seems like he is the one who does most of the work while you sit back, flap your chops and video his work....lol...

I have the same pipes, I went with the red line 468 cam, absolutely love it....

Nice setup. But doesn't harley void warranties now if you modify your bike with aftermarket performance parts?

Sounds good man.. D&D is always louddd

Ok it’s settled! I’m currently running V&H 2 into 1 pro-pipe on my 2012 Roadglide (103). I’m going to switch to D&D billet cat 2 into 1 with a Thundermax ECM. What cams coming up? I’m thinking on Fuel Moto woods TW-222 or Zippers 528 cams.

Great looking bike. Sounds good as well. I do prefer slash cut on D&D it’s true to their look.

In the redesign, is that rear head pipe different than the original? I have the original billet cat and love everything about it except that rear cylinder head pipe.

Grabbing that pipe and a ThunderMax tuner this month! Got the S&S 55mm performance manifold too. Hoping for 5-7 hp increase.

i thought 4 inch pipes looked too small, to me those D & D's look weird. I run a Tab performance 4.5 inch and it makes the rear look perfect IMO.

Awesome vid. Im partial to the FM Road and Track. It sounds so go. I had the Pro Touring dual muffs. Low growl like your Road and Track

Okay, The new exhaust is awesome

Would have been nice to hear the drive away at the end. BTW I too get all my goodies from fuel moto, and yes they are very knowledgeable and friendly.

Sending u some harley love from Slovenia Europe😋😎

Nice bro! Michigan! My home state. Lived in Johannesburg/Gaylord area.

Nice video, but as I understand it, doesn't that void the power train warranty since it isn't a Harley/Screaming Eagle modification?

I got a 22 rk special i just got this exhaust, there instructions are terrible. Did you use the c clips on the exhaust flange ? Did you use the clamp in between the tranny and the floor board ?

Looks and sounds amazing

How did u fit the exhaust gaskets into the motor? I’m having trouble getting them in .

Quick question, do you know the torq spec on the muffler clamp? Where the muffler clamps to the header pipes. Mine keeps sliding loose & I don’t want to overnighted. I can’t find the installation instructions with proper torq spec. Thanks

Good video. Did you say it has a wrapped baffle in it ?

Looks and sounds great. However, I like the look of the tips on the other bike. Just my personal thing.

Awesome sound and install. Question, when you installed the air cleaner, did the throttle body/intake manifold moved slightly???? I installed this week an Arlen Ness 15 spoke inverted air cleaner and I had to move the throttle body a bit to line up the breather bolts when installing the backplate.

Awesome!! I’ve been curious with that Air Cleaner does it get in the way of you knee at all? I put that Rhinehart Inverted on my softtail and it was a pain in the ass.

Dad still love those bars I'm compensating on 12s or 14s but same brand

Nice Hog! Sounds really good. What type of handlebars are those?

What about the center bracket did you not use that?

🔥🔥

hello my friend. great job with the install. Question for you there is a bracket behind the stock air breather. Did you remove that or kept it on when installing the arlen ness heavy breather ? also do you have the link for the gas tank emblem and harley davidson name decal for the rear bags. thanks.

Bike is looking good. 👌

You guys need a bike lift !!! 🤠 You'll never regret it. I'm also wondering if people don't read the comments? WTF is with every other comment crying about voiding a warranty?🤔

Why the sns cam and not the zipper red shirt. I think they are both great cams. How do u like that tuner.

I've got a 124 s and s in my dyna and run a d and d borzilla really love the sound and fit and finish is very good and it barks

Beautiful Bike

Kicking my ass trying to get mine istalled

There goes the warranty out the window. It's Okay if you don't care about it.

Did you put exhaust retainer rings on these since the flanges are permanent?

Hey, I’m dyno tuned stage 2, I’m installing this exhaust, s&s ported mani and tman intake…is it safe to ride it to the tuner?

So i bought this pipe and mine hits the cam cover and rubs. No matter what you do you can’t get to not hit the cam cover. Wondering if that was your experience with this too?

Is that the Vortex baffle?

Hate to say it, but I thought the stock exhaust sounded great. Not a big fan of that dummy pipe either

Did you notice the smoke ?

On the transmission how did the mount go numbers right side up or upside down on it aka the angle facing backwards or forwards

Did you install heat shields first before install head pipe? Thanks

I'm going with the Billy cat D&D but what kind of bars are those

What seat is on your dad's bike? looks awesome

Love how this is an install video with showing 0 install

I guess you work for fuel Moto!

4” or 4-1/2”

Did you use the trans bracket they sent you?

the borzilla is 4 inch muffler

Sorry. Not a fan of the diameter of the mufflers. Definitely look out of place l, too small with the extended bags.

What did that tuner run you

what size bars are they

Cam?

Must still have stock cam

If anyone says anyone else here watching in quarantine and gets the top comment I’ll explode

Stock pipe is 2-1-2 not true duals

Y’all be switching license plates a lot

I guess you don't give AF about the drivetrain warranty with that cam huh? lol I really wanna upgrade my cam as well but the warranty has me thinking.

Sounds pretty good and looking sexy!

You skipped the most important part fitting the headers

#firstcomment

Bitchin, I wonder if they'd make something like that for my 95th anniversary Road Glide. Its mostly in its stock configuration. kzfaq.info/get/bejne/m6-fm9Gol83QgJ8.html

Old Stock Exhaust ? It’s a brand new bike ! 🙄

Cam installation will cancel your warranty.

Ship me a Tesla plz

Sounds terrible without a cam