2020+ Silverado Front Brake Upgrade! this upgrade is a MUST HAVE (Part 1).

Рет қаралды 8,802

Жыл бұрын

Engine
6.0 370 ci Iron Block, Weisco Pistons -3cc dish, Eagle rods 6.125.
-ARP hardware throughout
-Studded heads
-Comp Cam -235/243 .621/.624 113
-SKU 54-460-11 (Grind Number 285LR HR-13)
Tuned by DSM Lights Dyno Tuned with HP tuners
-Speed engineering 1-3/4 Longtube
-799 heads
-90mm TB with x link
-TBSS intake manifold
-2006+ radiator with e fans
-Mighty Mouse Mild Catch Can
-LS6 ported Oil Pump
-Full speed engineering dual 3” exhaust
-Flex Fuel Sensor to support e85 or 93
-220 Amp Alternator
Transmission
-Level 5 4L80e RPM Transmission
-40k Trucool Cooler
-3800-4000 triple disk converter by Circle D
-Speed engineering drive shaft safety loop
-upgraded Yoke and conversion u joints
-Speed Engineering cross member
Rear
-3.90 gear ratio
-Eaton trutrac
Instagram: LSX_Panda
TikTok: LSX_Panda
Business Inquiries: siskbuilt@gmail.com
Suspension:
Belltech 4"/6" lowering kit
Springs and spindles for the front
C-Notch Flip Kit for the rear

Пікірлер: 39

@billkeller6023 Жыл бұрын

Sweet build, it's coming along nicely with all the upgrades. What exhaust package are you running? I'm looking into new exhaust for my 2012 yukon Denali 6.2l. Then doing the AFM/vvt delete kit with big cam and other goodies too.

@JohnDoe-mh8tm 6 ай бұрын

I didn't know about this upgrade. Thanks for the video.

@SiskBuilt 5 ай бұрын

Some wheels clear without shaving the caliper!

@BocaChevy Жыл бұрын

I have these on my turbo 07c Silverado for about 2 years and 20k miles and they've been awesome. The only downside is wheel fitment, I'm running take offs from a 19 truck but I've tried some of my other wheels and none would clear the caliper lol. You'll love the pedal feel and initial bite these give!

@SiskBuilt Жыл бұрын

I bought some spacers and gonna make it work like that for a little bit. The new drag wheels should clear. I gave them measurements so it should be good( I hope)

@aarontovar8769 Жыл бұрын

@@SiskBuilt how much space would they need to clear the caliper?

@jamesanthonyclemons8031 10 ай бұрын

Do you mind telling me what size wheels and tires are on your truck in this video. I really like what I see. Ty

@mauriciobernal5742 7 ай бұрын

Hey by any chance where do you get your rotors from ?

@3minitruck Жыл бұрын

Just use washers on the wheel studs. Hope I can do this on my wife cat eye

@SiskBuilt Жыл бұрын

The only issue was the rotor wasn’t seated evenly in the caliper! So doing the caliper I had to up them there. But the spacers, I probably could of gotten away with that!

@italian1488 2 ай бұрын

I heard you mention the rear brake upgrade, what parts are used for that?

@jasonmiller9902 Жыл бұрын

Are you still able to use factory master cylinder and prop valve? Looking to do this upgrade in the next 2 to 3 weeks and would like to know as much as possible.

@SiskBuilt Жыл бұрын

All I changed were the calipers, rotors and pads!

@BDRslayer 3 ай бұрын

Where did you get your calipers from I’m looking to do the swap but can’t find new gm calipers

@PeterHatch-mx7zc 2 ай бұрын

Do you have part numbers for the 4 piston calibers please

@aydengoldsberry5721 Жыл бұрын

Idk if you could but you may be able to run a wheel shim I have been thinking about doing this conversion on my truck but I am running a 2011 stock Texas edition 20 and I doubt it’ll clear

@SiskBuilt Жыл бұрын

I think most of the stock GM wheels should work. Mine are just little concave. I bought 6mm spacers and gonna see how that goes!

@henrysmifth536 Жыл бұрын

👍👍👍👍

@mirabalmedia Жыл бұрын

Get use to changing out your front brake rotor every 9mouths to a year.

@SiskBuilt Жыл бұрын

I think it’ll last longer. I dont drive ut everyday all day!

@mirabalmedia Жыл бұрын

@@SiskBuilt at my job we have to put new rotors on the front on the cop tahoes every 9months to a year.

@SiskBuilt Жыл бұрын

Those have the 6 pistons right? And I shouldn’t be putting the miles on it like the cop cars do!

@mirabalmedia Жыл бұрын

@@SiskBuilt I live in West Palm Beach. I work for Palm Springs. It’s a small village. The cops don’t drive to far, only in that small area of Palm Springs.

@robp418 Жыл бұрын

55,000 miles on mine and still going strong. Get driven hard on a canyon road going to work every morning.

@christopherhernandez9115 Жыл бұрын

Hey man how wide do the wheels have to be to clear currently I have 17x8.5 what do you have ?

@SiskBuilt Жыл бұрын

These are 22x9..5 Dub Future!

@robp418 Жыл бұрын

I have 17x8.5 0 offset method 305’s and they barely clear

@DanielSanchez-jd4mq 5 ай бұрын

U think my 17s race stars will fit I already shaved the calipers

@SiskBuilt 5 ай бұрын

They should, they stick out way further than mine

@ronaldareyes9899 Жыл бұрын

Hey 👋 😃 Cody I 👍 Taco 🌮 🔔 Bell At 4:00 ⏰️ PM.

@1966badnova 7 ай бұрын

Has anyone done this swap and cleared 17 inch wheels? If yes, did you have to grind the calipers?

@SiskBuilt 7 ай бұрын

I believe the smallest is 18’s to clear the calipers. I could be wrong

@ozlard 5 ай бұрын

17” you must run the newer 17” wheel work wt mode steel wheel

@JohnDoe-mh8tm 6 ай бұрын

Don't cut you calipers. Cut your wheels.

@SiskBuilt 6 ай бұрын

Cut your calipers not your wheels

@frightenedskillet1051 2 ай бұрын

Not to be that guy but your calipers can get cut and be fine but the moment you start cutting wheels your looking at getting them rebalanced and risking damage