Glad that the video helped! One of the main reason why I decided to post the "FULL" video even though it was long AF. Appreciate the comment and thank you for subscribing! 👍✌😎

You're very welcome! Glad you enjoyed it and that it was helpful! 👍🤙

You're Welcome, I'm glad that it helped.

i dont mean to be so off topic but does anyone know of a trick to get back into an Instagram account?? I somehow lost my account password. I would appreciate any assistance you can offer me.

@Hank Derrick instablaster ;)

Glad you'll be able to use it! 👍🤙

I bought mine online. I live in Canada so I was able to order it from baysideperformance.com. it took forever to arrive though. I believe Yamaha's website in the US sells the same servo buddy. www.shopyamaha.com

Love the way it sounds!

The rubber mounting strap doesn't go on the carbon fiber exhaust. The manufacturer is actually working on an all black and carbon fiber mounting strap that I believe should be out this year.

I've been around Yosh for a long time, this Hindle sounds soooooooooooo goooooood man! 🔥💥 Even that simple little bass rumble while on idle 🤤

@@CHRGITUP are the headers bigger than the Yoshimura ones? Cuz they kind small on the Yoshimura I have I’d like bigger headers and the exhaust looks great the one you got

Most Yosh pipes are 2.0" from what I remember. I know they made some 2.25" ones but for limited models from what I remember. The Hindle is 2.25" which is the one I have. I think all Hindle pipes are 2.25".

@@CHRGITUP yeah I need a bigger pipe. The one you have looks really nice. Thanks for the information bud.

Ride safe! ✌🤙

Hey steven, great question. After I installed the Hindle full system I did NOT get the bike Dyno tuned, and it still isn't tuned. After using the R6 with the full system I wasn't feeling any lag or sputtering from the power on when on the throttle. If I did I would have gotten either the ECU flashed or placed a power commander on the bike to get the most out of it. The ECU flash is permanent and cannot be taken back to stock, however, once you remove the power commander the bike would go back to stock mapping. As it stand I like the way the bike feels and love the back firing on deceleration, so for now it'll stay the way it is but in the future I will most likely throw a power commander on it. As for the Servo Buddy, it is only there to trick the bikes system to thinking that the EXUP valve is still being used with the exhaust. When installed it stops the engine light from coming on after removing the servo motor and cables. Hope this helps, have a great day!

@@CHRGITUP you mentioned you might throw on a power commander in future, hi I'm 8 months from the future 😂 Did you add a PCV? It would be awesome to see a tutorial on that. How do you even get at the lower injectors 🤔

😄 🤣 no no I didn't add a PC to my R6. Things are still running awesome and I won't be tracking this bike so I don't think it'll get a PC unless I'm given one to do content on 😶. Their is a new power commander 6 out from what I read and it seems to be easier then ever to install. Apparently just a simple plug and play, however, I haven't had a chance to play around with it though.

This link with the: 1: 12" Carbon Fiber Exhaust 2: Carbon Fiber End Cap www.hindle.com/road-race/Yamaha/R6/Yamaha-2017-R6-front-section

It's a 2020 R6.

Thank you so much, that's good to hear! I am located in Toronto, Canada. How about yourself?

@@CHRGITUP I’m in Sacramento, CA. I can do basic mods myself but I need help for more advanced modding.

@@CHRGITUP USA

Hey bud, do you have aftermarket rear sets or the OE ones that come with the bike? For the O2 sensor, I ran the wire a different way. I believe I show it in the video which way I went and that at the end I held it up until I fully installed the exhaust bracket which brought it closer to the sensor.

@@CHRGITUP They are OE ones

The OE rear set needs a slight mod by cutting a small notch in the bracket to make it for just right. The bracket is "made" for aftermarket rear sets apparently.

@@CHRGITUP that's helpful! Thanks man! We shall ride together sometime, I am from oakville. Cheers

Yeah we should, come on by one day! I go to random bike meets here ans there. Any good ones in the Oakville area?

Nope, I would only do an ECU reflash as a last resort. Right now the bike feels great, no lag, no loss in throttle response. Only thing I might do down the line is possibly get a power commander but right now I'm really enjoying the back fire pops and flames out the back 🤩😜!

Hey, not sure what you mean by your listing, however, everything I used to install the exhaust onto the R6 came in the kit from the manufacturer. Hindle (www.hindle.com/). The kit comes with the all the springs, flanges, brackets needed to install onto your specific bike. I won't be able to give you the static spring measurements since everything is already installed in the R6.

Hahah I'm working on it! Geeez! Lol

Hey, I do NOT get the check engine light at all with the servo buddy installed. I have not had any issues with it.

I think you are referring to the "servo buddy" that I added to the wire harness. The servo buddy tricks the bikes system into thinking that the actual servo motor and it's mechanism is still on the bike, when in reality I have completed removed the servo motor and all it's components.

@@CHRGITUP okay makes sense I recently added a y pipe on my 2020 r6 with a a aftermarket slip on and after the install I have engine light and no throttle response like 0 but my 2020 has a 08 motor in and not sure what’s causing this problem…

It's wrapped, check out my Yamaha R6 Project video and part 2 "the reveal".

@@CHRGITUP oh okay coo

I looked everywhere also, I think you can only get it if you custom make it.

Doesn't make a difference at all, if anything more clearance with the Hindle Exhaust. The fairings are still lower then the exhaust anyway as before.

I am talking about the ground clearance of r6 is 130mm and after you finish install the exhaust how much is the ground clearance of the r6 it is still the same or not?

Nope, no tune needed. I like the way it is for now no reason to tune it in my opinion.

@@CHRGITUP A ok. I was just wondering because I see a lot of people saying you have to get it tune once you put a full exhaust. But I think I'm gonna go with a full exhaust too.

It honestly all depends on how your bikes is reacting once the install is complete. If you notice lag or delay on the throttle while riding then yeah you may need to have it tuned or install a power commander on it.

@@CHRGITUP ooh ok Got it.

It's the MC500R Hydraulic Lift from K&L Supply Company. klsupply.com

Thanks for asking! I am actually releasing a video tomorrow at 12pm (EST), it will have all the current accessory Video and Product links along with CAD retail pricing.

AHAHAH I know right! Neighbor's might start hating soon!