2021-2024 Toyota Sienna Hybrid Trailer Tow Receiver Hitch Installation Instructions

No video

2021-2024 Toyota Sienna Hybrid Trailer Tow Receiver Hitch Installation Instructions

Рет қаралды 6,030

Күн бұрын

Master Technician Viktor G shows the DIY how-to installation procedure of the Curt Manufacturing receiver hitch on a 2023 Toyota Sienna Hybrid.
Please help support my channel by making any purchase using the following affiliate links for which I may receive a small commission, or use the Super Thanks button to donate to the channel directly.
Curt Manufacturing Hitch: amzn.to/3ST2fXv
Automotive trim and clip removal kit: amzn.to/3KgKGfg
Replacement aftermarket clips: amzn.to/4a662rc
1/2" drive cordless impact wrench kit: amzn.to/3Kcw00I
3/8" drive flex head digital torque wrench: amzn.to/3O1EOru
1/4" impact driver kit: amzn.to/48ipCyC
Impact driver socket adapter set: amzn.to/44XTTkI
Rechargeable LED mini work light: amzn.to/3Y74OpY
Thank you very much, I really appreciate it!

Пікірлер: 22

@williamjohnson6770 6 ай бұрын

Thank you for another fine addition to your helpful do it yourself videos, how to to install a Trailer Hitch Receiver.

@Viktor_G_Automotive 6 ай бұрын

Thank you William!

@jeffreyboynton250 6 ай бұрын

Thank you for the video! Would like to see a shot of what the hitch looks like from the back with the van on the ground.

@Viktor_G_Automotive 6 ай бұрын

I’ll be towing my boat in a week, so will make a video at that time. Thanks!

@mjk9674 5 ай бұрын

Sounds like Toyota or the dealership tried to muzzle you. So glad you are back, you are extremely knowledgeable and helpful. You are just as good as the Car Care Nut. Funny the CCN always say's he was a toyota/lexus technician for years. Good luck Viktor, i support you 100% your great!!

@Viktor_G_Automotive 5 ай бұрын

That’s exactly what happened! Now I am very careful to use a disclaimer to avoid any “trademark violations”

@stephenzies8867 6 ай бұрын

Nice Professional Job Viktor G. 👍

@Viktor_G_Automotive 6 ай бұрын

Thank you 🙏

@kenty6973 6 ай бұрын

Great video, Viktor.

@Viktor_G_Automotive 6 ай бұрын

Thank you 😊

@tavvybui4440 13 күн бұрын

Thank you for the video. There were some things you said that I couldn't make out. What did you put on the bolts and what did you say about 50 ft and 86 ft (pounds?) when you were tightening them?

@Viktor_G_Automotive 13 күн бұрын

@@tavvybui4440 the torque spec for dry bolts is 86 ft-lbs. if you use a lubricant on the threads (I used an anti seize compound), you have to reduce the torque so as not to over tighten and break the bolts. For that reason, I tightened mine to 50 ft-lbs and will recheck them down the road to make sure they are tight enough.