2021+ F150 CREE LED Bar Installation 180W Paladin F150LEDs

Рет қаралды 20,789

Жыл бұрын

Nick shows the step-by-step process to install the F150LEDS 180w CREE LED Bar on your 2021+ F150 & fits all models! The F150LEDS Front Bumper Bar is extremely bright and will turn the night into day in front of you in the toughest conditions! This bar looks great whether the bar is on or off adding a tremendous aesthetic upgrade to the front of your truck!
You can order yours here: www.f150leds.com/collections/...
=============================
=============================
Connect With Us!
Website: www.f150leds.com/
Instagram: / f150leds
Facebook: / f150leds
Twitter: / f150leds
=============================

Пікірлер: 51

@dansievers5915 Жыл бұрын

Hi, I'd like to connect the wiring that way, so I can switch the light bar on and off together with the regular high beams on the steering column. How do I, do that?

@F150LEDs Жыл бұрын

Hey Dan, that's a great question I wish I could answer but I'll have to direct you to our customer support experts for a solution! I know this is possible, but I do not know the process or how difficult it might be! You can reach out to customer support through one of the options shown on the page in the following link: www.f150leds.com/pages/contact-us

@rileytoms16 Жыл бұрын

Love how this fits! What is the length of this light bar?

@F150LEDs Жыл бұрын

Thanks Riley, we always design our bars to specifically fit the Ford Trucks we all love! This 180 watt bar is 38" long!

@robs6733 Жыл бұрын

Two questions please: How would the install be different if you were connecting to the aux switches in a 2022 Tremor? The connection wires are right behind the battery. Since they're only bolted to that valance, do the lights vibrate a lot when the truck is moving or going inner over bumps?

@F150LEDs Жыл бұрын

Hey Rob! If you have AUX switches then instead of running your harness into the cab and mounting a switch on the dash you would simply connect the power wire from the harness directly to the AUX wire you wanted to use inside the engine bay. No vibration or movement once the bar is tightened down using the included hardware! We would love to see some pics of this unit installed on your Tremor! =) Stand Out & Shine Brighter!

@robs6733 Жыл бұрын

@@F150LEDs thanks! I'll be ordering soon.

@scrub175 Жыл бұрын

Looks great. Two questions: Does the wiring harness have a fuse ? Did you route/zip tie the wire behind the grill to hide it a little bit? Thank you.

@F150LEDs Жыл бұрын

Thanks Rick! Yes our harness has built in fuse protection and you can certainly route the harness inside the grill to be hidden etc. Stand Out & Shine Brighter!

@danielrosas7550 Жыл бұрын

@phillipbaker3933I imagine these are “for off road use only”

@Shelby-GT350-R Жыл бұрын

Oooof, just spent $81k on a new Platinum... Really don't want to be drilling holes into such visible locations of body parts. You guys have any plans on inner grille mounts? Or somewhere else less visible?

@F150LEDs Жыл бұрын

Hey 1965 Shelby congrats on the new platinum! Once you've got your LED bar mounted you wont be able to see any holes etc. so no worries there! As for the inner grill, there are functional restrains that make that location less ideal. Thanks for your comment & suggestion! Please let us know how we can serve you further!

@loganp7043 Жыл бұрын

Same here I bought a new tremor and after spending 75k I don’t want to drill a hole in the bumper

@fredbishop4381 Жыл бұрын

I doesn’t look like you’re drilling the “bumper” just the valance which pops right off.. by the looks of if it, probably not a lot of money to replace when you are ready to sell or remove

@lidakang 6 ай бұрын

Same here, don't want to do any drilling on anything

@MatHousema 4 ай бұрын

Does the wiring harness include a relay in it or is it just a straight 12v to the switch?

@F150LEDs 4 ай бұрын

Hi there! The harness includes a built in relay 👍. Thank you for your question, we look foward to serving you soon!

@GT4azzzz Жыл бұрын

Does the premium in dash switch light turn off when the vehicle is off?

@F150LEDs Жыл бұрын

The switch ring turns green when the LED lights are active and remains a Ford blue when your LED lights are inactive, even when the truck is not running. The switch draw is very small so no need to worry about it slowly draining your battery. We have them equipped across our truck fleet without any battery related issues.

@synister281 2 ай бұрын

So just to confirm, the little switch in the truck would always be lit? Won’t that hurt the battery?

@F150LEDs 2 ай бұрын

Hey there! The power draw from the small light on the switch is so insignificant that it will not affect your battery as long as the truck is cycled at least every few months. Thanks for your question and for being apart of the F150LEDs family! We look foward to serving you soon!

@DubDriver17 7 ай бұрын

it did not appear that the switch was connected to an ignition source. Does this mean that the blue ring is lit when the truck is off?

@F150LEDs 7 ай бұрын

Hi there Dub! That is correct, the LED blue ring stays lit but its energy draw is extremely light so you don't have to be concerned about battery drain etc. You can connect to ignition if you were concerned. Thanks for your question and support, we look foward to serving you soon!

@DubDriver17 7 ай бұрын

@@F150LEDs I just received my led headlight bulbs and bed lights yesterday so I gotta pace myself, but keep up the good work; quality looks fantastic.

@F150LEDs 7 ай бұрын

Awesome! We are here if you need anything, thank you for your support! www.f150leds.com/pages/contact-us

@jaysson1151 Жыл бұрын

Will there be a yellow or amber snap on lens available sometime soon?

@F150LEDs Жыл бұрын

That's an interesting thought! We don't currently have plan to make these but I will pass this on to R&D ASAP! Thank you for the suggestion!

@jaysson1151 Жыл бұрын

@@F150LEDs hey, no problem!! Hope R&D goes for it! I’m looking to get a new F150 next year, this would be a nice add on!!

@91icebox Жыл бұрын

Could it be too heavy and crack the plastic lip?

@F150LEDs Жыл бұрын

Hey @Paul, No there is no risk of any cracking etc. Thanks for your support, we look forward to the opportunity to serve you!

@fredbishop4381 Жыл бұрын

What if I would like to run the cable harness on the passenger side and not drivers to avoid crossing the engine bay to reach my upfitter wires? (23 tremor Just flip the light upside down?

@F150LEDs Жыл бұрын

Hey Fred! You can certainly run the cabling on the other side but we would suggest routing through the grill etc vs flipping the light bar itself. The Paladin series has built in wind foils that are designed to be down, not facing up. Please let us know if we can help further, we look foward to serving you soon!

@fredbishop4381 Жыл бұрын

Thank you. Another question I have is I would like to avoid pulling the valance or else I would have to remove my fender flares.. is there a way to mount without having to remove valance?

@F150LEDs Жыл бұрын

Hey Fred! Currently you would need to remove the valence, but don't worry, as shown in the video it is very easy! Please let us know how else we can serve!

@matthewglazier7043 Жыл бұрын

Do you sell just the brackets separately?

@F150LEDs Жыл бұрын

Hey Mathew! Generally we do not but please reach out directly to our support team and we will see if we can get you taken care of! www.f150leds.com/pages/contact-us

@Hayven1992 8 ай бұрын

Hi, im looking to get this bar for my f150 tremor that already comes with in dash auxiliary switches. Would I be able to connect the bar to my factory aux switches?

@F150LEDs 8 ай бұрын

Hi there! Absolutely you can! You would just need to use the blue wire from the bars wire harness to connect to your desired AUX switch. please reach out direct to the support team who can provide more details! Thank you for the opportunity to serve you! www.f150leds.com/pages/contact-us

@Hayven1992 8 ай бұрын

@@F150LEDs Awesome thanks, I just ordered my bar, cant wait to get it installed!👌

@F150LEDs 8 ай бұрын

Sweet! We cant wait to serve! Thank you for your support, we look foward to your feedback! @@Hayven1992

@AverageFriendlyGamer 5 ай бұрын

Has anyone come up with a reliable method to install this without drilling into the bumper?

@F150LEDs 5 ай бұрын

Hi there! Thanks for your question, through various testing we found the installation method displayed is the best option. It is very easy to drill the location and shows no sign of drilling once the light is in place. Please let us know how we can serve you further!

@bigmike7801 Жыл бұрын

Would this work for 2022 Tremor?

@F150LEDs Жыл бұрын

Hey @bigmike7801, yes it does! We look foward to serving you and would love some pics of your tremor post install! Let us know how we can help!

@binli052199 Жыл бұрын

Will that fit for 2022 ford raptor?

@F150LEDs Жыл бұрын

Hey Ben! We have a specific 210W CREE LED bar application for the Raptors that would probably be a better fit for your 22 Raptor than the 180W application. We would love to get some pics of it installed on your Raptor too!

@chrisclemons9943 Жыл бұрын

Do you offer the complete wiring harness

@F150LEDs Жыл бұрын

Hey Chris, we include everything you need to complete this install including the harness!

@chrisclemons9943 Жыл бұрын

I just ordered the push button

@iggy-pg6gq Жыл бұрын

Yikes, I pulled that trim piece off my truck, to take the grill off, no way I'd be mounting a light bar to that piece of trim

@F150LEDs Жыл бұрын

Thanks Iggy! We did a lot of testing and have thousands of fellow F150 owners loving their Paladin bars with zero issues but we understand it may not for everyone! Thanks for your support!