We installed Icon's new 3" lift on one of our new 2021 Broncos. The Bronco in this video is a Badlands Sasquatch. The lift will work on all 2021+ Bronco trims.
Пікірлер: 32
@Bacnow6 ай бұрын
I can’t wrap my head around the simple approach you utilize to remove the front coilovers! Everyone, and i mean EVERYONE, removes far more components to achieve the same goal! I am planning to do this in my garage next month and i hope this approach doesn’t have any unspoken difficulties!🤞🏻
@jackbauer93472 жыл бұрын
Let's see a shot of those CV angles...
@62chad762 жыл бұрын
Icons technique to take out the struts is soooo much easier than zones technique. Basically just disconnect the sway bar and unbolt the lower arm as opposed to zones lift basically saying to disassemble the entire suspension system.
@wildhorses4x42 жыл бұрын
Great info
@johnburnett19742 жыл бұрын
Could you put this spacer lift on a bronco that has the Sasquatch package
@colby78hurley2 жыл бұрын
Does the non-Sasquatch Badlands need the extra set of collars?
@rodleonard14292 жыл бұрын
So in your professional opinion, do you feel all the stock components on a non-sasquatch would be compromised with a 3" spacer lift? Would you at least consider upgrading the UCR's? My Bronco will not see hardcore offroading, I'll leave that up to my Wrangler with a 6" long arms susp lift.
@bobbieleach35682 жыл бұрын
Did it take away from the smooth ride the bronco has? Looks awesome. Thanks for sharing. Wanting to get this done to mine when it gets here anytime now
@bluesti32 жыл бұрын
Not at all, rides like stock.
@NorthShoreOverland2 жыл бұрын
Very nice! I'm going to check out that kit. What offset do you recommend for the rims to fit 37's on a non sasquatch badlands with that kit?
@bluesti32 жыл бұрын
0 Offset works great. Even stock with 0 offset, rubbing wasn't an issue on the streets.
@Expeditionxoffroad2 жыл бұрын
Since you have a non-sas you’ll use all the pucks and end up at the same height. We prefer 0 offset. Tire sticks a little outside the fender but not by much. Gives it a nice aggressive look without going to crazy on the offset.
@AndresGonzalez-yo4py10 ай бұрын
Where is your shop located at? I would love to do this to my bronco.
@johnburnett19742 жыл бұрын
Do you recommend to change the uca when adding the spacer lift
@bluesti32 жыл бұрын
Not necessary.
@charliecharlie97872 жыл бұрын
Will it look bad with this 3 inch kit and the original 35 sasquatch rims and tires ?
@bluesti32 жыл бұрын
No, it looks great even on 35's!
@Derekva402 жыл бұрын
what size tires are on it after the lift? Are those 37's or 35's?
@ChuckReynolds Жыл бұрын
look at 12:14 timestamp
@Auxbeam2 жыл бұрын
Hi Do you need some great lighting for your car to help you better driving, off-road? We're the pro auto lighting manufacturer for nearly 20 year and we're looking for sponsorship!
@BigWheelFab2 жыл бұрын
When are they coming out with coilovers
@bluesti32 жыл бұрын
Soon... they already have it designed and tested, and have working kits. Just waiting on the production springs for the coilovers!
@Expeditionxoffroad2 жыл бұрын
Yes! Should be out soon. 10” of travel in the front and almost 15” in the rear. It’s going to boogie.
@Brian.82722 жыл бұрын
What's the cost?
@Expeditionxoffroad2 жыл бұрын
It retails for around $400
@steveisho40262 жыл бұрын
THE SOFT TOP IS SO LOUD ITS INSANE!!!!
@bluesti32 жыл бұрын
I don’t feel that way at all… this isn’t a Cadillac. LOL
@johnt66732 жыл бұрын
Many different reviewers have mentioned it is very similar to a jeep.. Wake up ...
@johnt66732 жыл бұрын
3" lift on spacers? No thanks. I know icon makes some very nice suspension components, I would wait for the coilovers that are coming....
@bluesti32 жыл бұрын
It's a 2" spacer, then also a 1" preload spacer... not entirely a spacer. It's a great, low cost compromise until Icon's full kit comes out. And it still rides and drives great, like stock. For those that don't off road hardcore, this would be great long term.
@hadtocheathimtobeathim65499 ай бұрын
@@bluesti3it’s shit.
@hadtocheathimtobeathim65499 ай бұрын
What the hell is with these coil spring preload spacers? This is just a stupid idea. It makes the strut run outside of its ideal operating window 99% of the time. Why don’t these companies just include a diff drop bracket like RC does? And without a drop bracket your increasing the cv angles statically and reducing travel and articulation. I guess this just says these type of lifts are for mall crawlers only.