DISCLAIMER!(You do not need to remove the complete dash as video shows to access speaker outputs. The outputs are accessible on a plug on the audio output module right behind the climate control. If all you need to do is access the audio portion, then removing the climate controls are all you need and you should have access to a square black plug which we will provide the wire color codes to)
Front left +/- Blue - Gray/Brown
Front right +/- Yellow/Orange - Green/Brown
Rear Left +/- Gray/Violet - Brown/Green
Rear Right +/- Green/Violet -Gray
This schematic is for the non-amplified system.
In this video we show you how to disassemble the front dash in order to access the radio brain and display in this all new Bronco Sasquatch edition. It is a lot more work than the sport model Bronco. If you have any questions feel free to leave it in the comment section.
In the following video we are going to be doing a sound system upgrade consisting of
-4 channel audison amp
-mono block audison amp
-hertz Cento pro front components
-hertz 3.5 coaxial rears
- 3 10s hertz subwoofers in a custom downfiring enclosure we are building
Big upgrade from the factory sound quality.