No video
2021 FORD Bronco Sport Body Kit - EN/ESP
Рет қаралды 24,318
3 жыл бұрынINSTALLATION VIDEO / VIDEO DE INSTALACIÓN - FORD Bronco Sport 2021
www.airdesignusa.com/shop/bro...
00:13 - Hood Scoop
02:29 - Front Fender Flare
05:11 - Rear Fender Flare
08:40 - Rear Fender Flare Extension
10:36 - Front Door Molding
12:48 - Rear Door Molding
14:44 - Roof Spoiler
IMPORTANT
Read the manual carefully before installation.
In the next 24 hours do not wash the vehicle
TOOLS:
(Not included in the Kit)
-Caulking gun
-Cutter
-Drill
-Drill bit 1/4''
-Fastener Removal
-Isopropyl alcohol 91%
-Masking tape 3/4''
-Microfiber towel
-Paper towel
-Rarchet
-Socket 7mm
-Accessories included in the kit
Thanks for being part of the family AIRDESIGN, Oceanside, CA - MX.
@marioastudillo8739 3 жыл бұрын
Excelente como quedan.
@user-reddevilutd 2 ай бұрын
Why use polyurethane along with the 3m tape??
@Gent003 3 жыл бұрын
Tire specs?
@thomascox100 2 жыл бұрын
i go to the sight and i cant find this on there web page at all for the 2021 bronco sport
@nobu_my 3 жыл бұрын
I couldn't find the products online
@ruzzogarcia84 3 жыл бұрын
Donde lo puedo conseguir en mexico?
@AirDesignOfficial 3 жыл бұрын
Hola, si deseas más información a travez de Air Design México puedes escribirnos un correo a: naara@airdesignusa.com
@ruzzogarcia84 3 жыл бұрын
@@AirDesignOfficial me marca que el correo es invalido o no existe
@gabojulian Жыл бұрын
@@ruzzogarcia84 lo conseguiste? Te contestaron?
@vvh3546 2 жыл бұрын
DO NOT GET FENDER FLARES ! The clips for the flares are complete trash !! The fender flares do not stay attached !!
@angrypickle 2 жыл бұрын
... that sounds like the bushwacker flares.. this one only has 1 clip and the rest is 3m adhesive and double sided tape?
@OGcottoncandyrandy 3 жыл бұрын
Imagine gluing these $2 plastic parts on a $40k suv. Yikes.
@64dejones 2 жыл бұрын
I might be ok with the sticky tape, but that glue says I'm gonna pass. What if you need to remove the part?!
@psycold 2 жыл бұрын
It honestly made it look worse t ome
@NEWTSNITCH 2 жыл бұрын
There not $2 plastic parts. It’s solid metal with abs over it. Don’t bash a product you know Jack crap about.
@tedschmitt178 Жыл бұрын
@@NEWTSNITCH Regardless of what materials went into the product, they can still be ugly or pointless.
@mub9341 2 жыл бұрын
DO NOT BUY THE HOOD SCOOP!!! The center caves in at freeway speeds!!! Complete garbage and i will be asking FORD to pay for its removal off my hood. hope it comes off without any damage or they will be replacing my hood too!!! $400 for cheap junk. DONT BUY IT!
@jibbyjam1 2 жыл бұрын
It's a completely non functional hood scoop with nowhere for the air to go. It takes half a braincell to see this would be a problem.
@NEWTSNITCH 2 жыл бұрын
Hood deflector is crap too. It created a ton of hood flex up by the windshield even when the vehicle was at idle. Removed it with the aid of a heat gun and no more flex / vibration.
Panda Motorworks
Рет қаралды 14 М.
QAZSPORT TV / ҚАЗСПОРТ TV
Рет қаралды 642 М.
DG’S Garage
Рет қаралды 26 М.
Underground Graphics
Рет қаралды 1,3 М.
Empire Auto Spa
Рет қаралды 20 М.