Awesome video, going to do this later today. Thanks for the helpful video
@oregonmotojohn2 жыл бұрын
Thank you! So glad it was helpful! Have been doing this for years and this technique works best with the least mess.
@RedSound2011 Жыл бұрын
Consider having the vehicle lifted and level first, if you rotate tires, more will come out.
@bryanmagargee2277 Жыл бұрын
Great video! Thanks for the thorough info
@jjwiggs28 Жыл бұрын
Excellent video. I appreciate you...
@robertwood9628 Жыл бұрын
TIP: remove the fill plug before the drain plug. After draining the AGL fluid I could not get the fill plug out and ended up having the dealer extract it. They recommended to ALWAYS remove fill plugs first for this very reason.
@condemned4life874 ай бұрын
Jesus christ look how clean his whip is. Even the skid plate is spotless. I can't get mine that clean no matter how hard I try.
@my357magsКүн бұрын
Must be a pavement princess!
@mustangracer51243 ай бұрын
My 2021 rzr is identical and has copper plug seals that leak no matter what even when I put new ones on I bought it new and it came that way but I wonder if o rings were supposed to be on them.
@vikkleo8 ай бұрын
All ways do fill plug before drain plug
@seancaron33238 ай бұрын
2 things.. 1: pro tip, always take your fill plug out before you’re drain plug. (If you take it out first and something goes wrong you still have fluid in it and you can go ride still and fix it during the week. 2: Your car is so clean 😂😂 I consider mine cleaner than most but yours is spotless 💪🏼 I’m also at 7100 miles
@condemned4life874 ай бұрын
Does anyone know what the difference is between the black and blue bottles of oil from Polaris? They both say ps4 full synthetic
@randytrivitt65392 жыл бұрын
Drain bolts only have to be torque to!! 10foot pound!... 👍👍👌
@oregonmotojohn2 жыл бұрын
So true, thanks for posting, I sure learned that lesson the hard way! Thanks for posting!
@biknjak Жыл бұрын
I could be wrong (usually am), but I'd bet those drain/fill plugs are steel. I found out the hard way that over tightening a steel drain plug on an aluminum crankcase on my dirt bike equals stripping out the crankcase threads and a trip to the dealer for a repair. I'll bet it's set up the same way. My takeaway was don't rely on a cheap Harbor Freight torque wrench in that scenario....
@oregonmotojohn Жыл бұрын
I feel your pain, once I used a low budget torque wrench to tighten headers onto a new street bike, it stretched all the threads and I had to remove exhaust and replace all exhaust header studs once I realized what was happening. That ruined my confidence in torque wrenches for a while. Great point!
@armedfarm34296 ай бұрын
Looked like some water in the front also, it gets s whiteish with H2O.
@alt9874Күн бұрын
That front diff looks like it got a bunch of water inside it...the old oil was way too grey and milky.
@michellimoges470010 ай бұрын
Hint: use recommended torque settings for drain and fill plugs. That way you won't overtighten.
@IvanGonzalez-pc9ufАй бұрын
What’s the torque
@michellimoges4700Ай бұрын
@@IvanGonzalez-pc9uf Drain Plug is 21N-m and mesh filter is 31Ft-Lbs
@justdoit4492 Жыл бұрын
What’s the actual viscosity so I don’t have to buy from a dealer????
@armedfarm34296 ай бұрын
AGL is like a 5w20 synthetic, BITOG did a analysis. Nothing special. Copy of a mtr oil even anti wear. DD is thinner like a thin atf, I always use synthetic ATF.
@russelrlthomas11 күн бұрын
go to the amsoil website and enter your model and see the options.
@68chevelleconcours Жыл бұрын
How is that thing so clean! It looks like it’s never been used. You apparently don’t live in Tennessee 😂. Wind rock will ruin a clean machine.
@donaldmetts56742 жыл бұрын
Not to be that guy but it tells you how to change the oil's in your owners manual.
@mtrujillo20072 жыл бұрын
Thanks Boomer. Some people prefer a combo between the manual and videos for support.
@FTWworlddomination2 жыл бұрын
sometimes people buy used and dont get the manual with it
@colton5bucks Жыл бұрын
🤡
@jimeylee2036 Жыл бұрын
Sometimes folks need a better hands on view of the work. Great video! Thanks for taking the time!
@AltivatedElementАй бұрын
Thats what i was thinking. Thanks for being first to say it. Youngsters these days rely too much of talk talk video. Manuals always will be the go to. Chilton, haynes, oem. But go to the manual