I'm the cheap ass that owns this bike, ya'll. 2 things: the previous '21 R1 featured on this dyno made 180hp with a decatted Yoshi exhaust. So I'm far from disappointed with these results. Yeah, this can and maybe even the link pipe will rust out in a few years, who knows, but I can replace this exact setup 8 times for the cost of the yoshi, and I had no intentions on waiting to dyno tune this thing until I could find the $1000 version of this setup in stock anywhere. I'm also just not a fan of how yoshi or 2 bros sounds on this gen r1 to be frank. 2nd, back pressure? What's back pressure? My future plans for this bike don't involve back pressure 😏. Bottom line is, these fellas made some ridiculousness happen to get rid of the low end throttle jerkiness, and overall throttle response and I'm extremely pleased with the results. Dyno tuning isn't just about peak HP. Just kidding. Yes it is.

it literally does not matter if its a knock off. they buy one original austin racing, or leovince, or arrow or whatever it may be, they copy it, and re produce it with stainless steel and not titanium. i have a dominator on my bike for like 3k kilometers. everything is ok. no rust, no blown welds, everything is ok

I got a mail-in ECU flash for my R6. My god, it’s phenomenal. Moore Mafia knows their stuff

I don't think slip ons make much difference, between a fake one and a real one. Full exhaust on the other hand, you have to buy the real thing, just my humble opinion. Good video like always.

Great gains! Owner will def feel that. Exhaust sounded good as well

Just got my ecu back from you yesterday and couldn’t be any happier, the best customer service I’ve ever experienced talking to you personally on the phone troubleshooting my fuel pump issue, can’t wait to feel this power at wide open throttle!

I ran danmoto for years. Had to use a socket to spread the pipe some for muffler to slip on, but other than that, no long term term issues.

I have this same set up on my 21 MT10 and I couldnt be any happier! Sounds awesome the power gain is obvious! Id rather spend the money on the tune! And it breathes FIRE!

Just recevied my ecu back today flashed by Moore mafia and man this is a whole different bike

Whoa man that r1 showed out for everyone to see

Appreciate the content and all the variety of bike you show. I'm out in Colorado and have an R1S with a Yos 3/4 exhaust and power commander. Can't lie I have been considering the replica AR exhaust and getting a tune instead of the power commander. I did see a recent video of you tuning an R1S. Subscribed!

Chris, Love how you say its crazy cold in S.C. in this video. 😆🤣 It was 6 degrees here in denver this morning.

I like the low deep sounds.

I'm sending my Whips to Moore Mafia

Sounds awesome 👌

I love the R1 but was blown away seeing that ECU right behind the left fairing! It just doesn't seem like a safe spot IMO. They must of ran out of space everywhere else. Awesome video bro!🔥🔥🔥

Professor Moore/ Moore Mafia chk this out. Retired roll racer, who made some of the best roll racing videos. (Outspokentiger) His R1M made something like 185-188 hp lowered, slip on, tuned by him. He beat a lot of people watch his videos. Now can you imagine this customer comes back full exhaust, Sprint filter, bearings, re tuned. Those numbers are nice right now w minimum. Good job

The best value for money upgrade for as long I can remember 😉

Wow great job!! Sounds dope asf.

The best and most beautiful bike in the world r1

Great gains

Number ☝fan always bringing the thumbs 👍👍👍👍👍👍💯💥👊you supply the Juice 🚀

Chris are you going to back to pro/street ? Definitely have missed you kickin everyone’s ass !!!

Sounds badass

I just got the sc knock off. It sounds way better than the $40 Amazon straight pipe that was on it. Running it with the baffle. All of my decel popping went away. Only prob I have is..... The hotter the bike gets, the louder the exhaust gets. It runs super smooth at 4,000. Runs really shifty below that. 8,000 rpm and above. It's super quiet.

SWEET!!! Gains all around! 👌🏽🏁🏁🏁🏁 I'm saving my penny's behind wife's back so I can get this moore mafia tune.😂😂😂👍🏼

Ahhh yes the Ebay special exhaust. So many people go the ebay/chinese long tube headers for 5.0 mustangs because they do the same exact thing as the $900 ones. Granted I like to support USA made and small business but sometimes you gotta do what ya gotta do for them horpowers

Love some popping lol!

Have you modified ignition map a lot? I have an unrestricted EU model w/ tuned AFR and ETV, KN filter and decat, but only got about 170 on dyno.

I have a knock off akra on my fz09 and it was $400 cheaper. Held up super well for the past 2 years now and about 10k miles. Makes the same power too

My question to you... The decel pops are good to the bike or bad for the bike... I have been reading so much mix opinion on decel popping and backfiring while decel and most of them are saying it is bad for the engine. I would like to get a experts opinion than some random dude on a forum... Thanks

Mast Video bro

Ever do a test on a bad or sticky chain? Kinda wonder what the best chain is for HP.

Just curious Chris. Is it the same price for ecu flash for older bikes like a08 zx10 and a newer one like 2020zx10. Or is it all the same price.

Love the content. Once I get an R1 im on my way XD

Sick

Magic 🎩 Mike is a magician I see 👀 dat

If I have the same set up do u need my bike in person or can I just send ECU to get same tune and settings put on? Some people hate on the crackle's and pops but I need that in my life lol.

Hey Chris just bought a 22 Hayabusa if I was looking to get it tuned can I do just send in the ECU get it back & it's good to go or do I have to come in person for it to get tuned.

Hey chris just a question for the decel fuel cut off,is it true that except the cracking and pops it is also used to reduce the jerkiness when you quick open the throtle again if you have closed it because the injectors dont stop spraying and it eliminates that jerky movement?And also does it harm the valves or anything engine-wise?

Love the videos and information. I look into a 2020 suzuki hayabusa. And couldn't believe how much insurance cost. I will not be buying any bike smh

Nice gains for the money. I would only be worried about welds holding up over the years if bike kept for a long time

Hey is possible to bring a honda cbr600rr dyno review im thing of sending in mine to moore mafia.

you got something for an 09? ecu wise? I will send it tomorrow!

That would definitely wake the neighborhood. Lol.

Damn how was i the first like on here......CHRIS what video software do you use or being i want to start messing with this 360 max cam i have to kinda make my own vids. Is there a software to start using that is pretty easy to get a handle on.

I'm like 4hr from you so do you have another location in NC

I'm a sad case 😩. I click on these videos too fast 🤣. First by the way

Nice

would be interested to see how much a legit AR exhaust makes on that same bike and conditions

Can we mail in an ecu for a flash from any bike to you to flash?

I had that same mid pipe with a SC knockoff, even with ear plugs my ears were still screaming after about 20 minutes of casual riding. It sounds good but they're absolute trash. Just put the stock muffler on a decat mid and you'll be better off.

picked up a 2010 cbr1000 with a knock off exhaust anything over 4000rpm is antisocial as fuck lol and warmup idle 2000rpm sounds pretty intense also. it does have decat also

Do you tune the 22 ktm 890r?

I love how similar it sounds to a nascar v8

brand won't matter. if it's a good/exact copy, it will have the same performance and sound as the original.

Still looking for that exact moment when OBNOXIOUS loud became synonymous with making power. Loud doesn't equal power.

Does the older generation bike ecu limits throttle as well? I have a 2005 zx12r stock ecu.

Hey man I really need my bike done want to make some serious power want to build a dig bike and could use some help seeing I haven’t messed with bikes to much I have grown up drag racing cars but have gotten a love for bikes and now have a couple of them and I need all of them tuned up when could I get in is there a number to call and set up a appointment?

Does turning off the fuel cut smooth out the on/off throttle jerkiness?Thanks

Link to the pipe?

I just thought I'd put something out there... some of you all's are bothered about a Chinese knockoff exhaust... that dyno'd almost 185. A bike made in Japan.... with a knockoff Euro exhaust.. made in China.... But Murica, right? *Facepalm emoji here*

Pops and crackles sound like header leak.

Just Click It!

I'd like to not get ripped off by American goods. Where can I purchase have a knockoff like this

Nevermind any power gains when the exhaust is so crappy, its worse than a straight pipe

The tip of the exhaust looks like metal duct from Home Depot

$20000 bike $200 exhaust. Makes sense.

I’ve been looking around and if the end cap didn’t discolor this would prob be the best exhaust to get on a budget. That’s the only thing I’m seeing that’s messed up on these.

Chinese levers also?

🙄👍 Pang ar apna under Done

Nah, I got two of those for $67

Yam will never get that power. Unless you take it to NASA!!! NO power.. 🤣🤣

Chris off topic mannn I really wish u feature trump on the channel with a brief rundown on the motor build . If it's still alive .

I don’t understand why people buy a nice ass bike to put a fake exhaust on it. Ridiculous

Come on brother, don’t promote piracy. Maybe you’re going to make Moore-branded pipes some day, do you want some chump to steal your name? Just saying

Guys spends the cash on the bike, but then cheaps out on the wannabe exhaust.......cracks me up. lol

Have a hard time believing

19k for a bike and buys a knockoff exhaust 🤦‍♂️

Why are R1’s so slow?

LOL. I’m guessing you aren’t an AR dealer? BTW, that fake slip on looks suspiciously like the vent pipe on my clothes dryer….

Oh come on now that exhaust looks super cheap and the strap finish is horrible, junk that crap

Why do people insist on continuing to fund China with this cheap exhaust crap? "I can buy 3 pieces of garbage from China for the cost of keeping my dollars in the USA market!"

Chinese knock off 👎

Austin fake not original 😩