2022-2023 SEA DOO IS SLOW? YOU MAY WANT TO CHECK THIS FIRST

2022-2023 SEA DOO IS SLOW? YOU MAY WANT TO CHECK THIS FIRST | Boost Leak + Ride Plate + Tech Tips

Рет қаралды 20,424

7 ай бұрын

Today we got a 2023 Sea-Doo GTX 300 Limited going only 74mph with a stage 1. Let's see if we can figure out why it is going so slow. We will be checking for any boost leaks, Checking the Ride Plate, as well as the Jetpump and a few more things. Lets see if we can get a few more MPH out of it.
Be sure to check out ‪@RM.Adventures_‬ KZfaq channel for some really Cool Content
let's see what happen.
Be sure to check out The Calas Performance Tunes. Available now on www.calasperformance.com/
or email us at CalasPerformance@gmail.com
Be sure to follow me on
IG -0 / calasperformance
FB - / calasperformance
Check out my website
Calas Performance www.calasperformance.com/
Check out DDR Performance
ddrperformance.com
Check out the fizzle factory
www.fizzlefactory.com/
#jetski
#mechanic
#seadoo
#dragrace
#techtips
#pwc
#marine
Director/Video Editor/Producer/Drone Pilot/
Dessie Vizcaino

Пікірлер: 93

@stevec2404 7 ай бұрын

Thank you for following up on my request!🎉🎉🎉❤

@waynespears5664 7 ай бұрын

These videos this GUY hammers out with great info are the best I've seen on you tube and the Humor is an added PLUS........................Fort Worth,Tx

@MikeZ32TT 7 ай бұрын

Love it you you figure out a solution. Nice work.

@daveking6738 7 ай бұрын

Keep up the informative video's with the mix of humor, big thumbs up to the channel it is one of the best Ernesto ❤

@Ali-dl4dc Ай бұрын

Amazing fun near the end of the video, nice way to finish it up wooohoooooo

@JoshDK- 7 ай бұрын

Great video, been waiting for this one.

@dougsanders3579 4 ай бұрын

You are great, thanks

@knowyuhgrow420 5 ай бұрын

Thanks for sharing

@davidbalan6571 7 ай бұрын

Another problem might be that the speed mode might have been changed from sports/ normal into ECO mode. Impeller or a worn wear ring may cause cavitation and top end speed. Be certain if this is the cause to replace this .

@aristidesroman435 7 ай бұрын

Shiming the ride plate down on the back side

@jasonmekush5280 7 ай бұрын

I wish these stupid 17k skiis came w a digital boost guage . customer would say i now am down to blah boost level.

@pacman7877 7 ай бұрын

Great video quick question have ypu seen the problems with the stage 2 riva impeller that is from solas?? I think my ski have one, but dont know I saw you installed the solas on this unit!

@calasworld 5 ай бұрын

Solas had a problem with the first generation 13/18 but not anymore from my understanding I never had one break

@javiercrespo5275 3 ай бұрын

Hi I’m new in the hobby and I’m learning a lot thank to you thank you. Where are you located at?

@wisinyandel6537 Ай бұрын

Palm Beach County FL

@Lyfehack 3 ай бұрын

What should the slip be on a 2016 rxp-x 300?

@michelnunez7088 2 ай бұрын

Hey. Brother I got 2022 rxtx col air intake catch can water box and full exhaust rear exit and scum only goin 72 at 8k rpm

@wisinyandel6537 Ай бұрын

Is it tuned properly?

@johns5826 7 ай бұрын

Excellent video. What “tweak” did you do to the ride plate?

@calasworld 5 ай бұрын

That particular plate had a dip in the middle so I sanded it and made it flat. Now you have to be careful because the ride plate is only a few millimeters thick so don’t go crazy sanding it down as you might ruin it.

@StangCartel 3 ай бұрын

Might be better to buy a new ride plate and replace it

@ribasg3 7 ай бұрын

I currently have a mate with a dead slow apex. His previous 2021 rxp300 was way faster. We tested for boost leaks, ride plate and all is fine. We did find that the ibr gate sits waaaay down though. No setting helped so we are looking into trimming it.

@mikenegron6162 7 ай бұрын

Yup! I have an appointment set with BRP to re-flash the software. There's also talk on the Green Hulk forum about trimming / filing down the bucket stops to allow for the bucket to raise all the way.

@RM.Adventures_ 7 ай бұрын

Calas, Awesome video and thanks for helping me to troubleshoot the Slow-doo issue.

@DessiLu14 7 ай бұрын

Love your content brother!! Just subscribed to your channel

@calasworld 7 ай бұрын

Thank you

@RM.Adventures_ 7 ай бұрын

@@DessiLu14 Thx homie.. I appreciate the support

@paullypark7924 3 ай бұрын

Is this a limited with idf?

@RM.Adventures_ 3 ай бұрын

@@paullypark7924 yes sir

@aristidesroman435 7 ай бұрын

I got the same issue.

@jasonmekush5280 7 ай бұрын

he prob use a flat blade screwdriver to tighten it. no use a 1/4 inch socket on extension many are 8 mm hex.

@keatinhales6524 7 күн бұрын

to tighten what?

@matthewkinsey6587 7 ай бұрын

I’m not 100% sold on the ride plate issue I know people who have the supposed slow plate but still hit advertise top speeds with aftermarket kits you have to check the trim tabs also with the speeds we hit if they are putting the bow down any it will kill speed

@RM.Adventures_ 7 ай бұрын

I wasn't either, which is why I took my ski to Calas to look over everything. At the end of the day the ride plate was the last thing we could mess with. Granted, my ride plate was the "bad" ride plate but it also had the little dip in it.

@matthewkinsey6587 7 ай бұрын

@@RM.Adventures_ I haven’t seen one with the dip in it yet like yours but I know people who according to riva have the slow plate but still hit the numbers they are supposed to hit I believe it’s multiple issues causing the slow speeds

@RM.Adventures_ 7 ай бұрын

@@matthewkinsey6587 yeah, calas showed in the beginning of the video that both of his ski's have the slow ride plate.. yet he's won drag races with them.. LOL

@matthewkinsey6587 7 ай бұрын

@@RM.Adventures_ I seen that and I’m glad he showed that so alot of people will stop thinking it’s a ride plate issue on all of these skis

@franktedeschi5331 7 ай бұрын

I’m very jealous it’s 51° in New York. I need to move down south.

@exploreflorida5303 7 ай бұрын

Don't bring shitty policies. We live free here

@jeffreylonghr 7 ай бұрын

Only time I have seen ride plates was on the XPLs. I think slip, prop, oil, sparkplugs ;>

@jeffreylonghr 7 ай бұрын

Boost leak is a given, pump seal I always change when prop change. Im crazy like that lol and torque the hell out of the prop. If that prop spins off it pushes the carbon seal and the boat will go to Davy Jones Locker lol!!

@jeffreylonghr 7 ай бұрын

I seal all ride plate holes as well ;>

@erykmajka1628 4 ай бұрын

where can I download this manual 6:47?

@calasworld 4 ай бұрын

At Riva Racing

@godfatherstilllives5327 7 ай бұрын

Awesome as usual, can you tell me where you get the tool to check the slip on the supercharger. And part numbers

@StangCartel 3 ай бұрын

It's a torque Wrench

@jasonmekush5280 7 ай бұрын

Have a Merry Christmas my Fl neighbor ( 941 )

@jamesallen5627 5 ай бұрын

Silicone around the plate to better water flow over it ??

@wisinyandel6537 Ай бұрын

It might sound silly but it works

@txpyroguy817 2 ай бұрын

Do you have any info on filing down the vts/ibr bucket stops to get more range with the trim?

@calasworld 2 ай бұрын

@drsnow5123 11 күн бұрын

I’d like to see what you could do for an EP 230. I get 68 mph on any day and I can touch 69 mph at 9 hours of break in. My ski is now in the shop with 11 hours and I’m having my first service per Kevin Shaw. I have added a catch-can, secondary. bilge pump, Blue Sea battery isolator, and nav lights. I’m going to see what a catch can does, if anything, next weekend when I get it back. I’d like to see 73 to 75 out of it. Do you think it’s possible without doing a stage 2?

@ninjawarrior821 7 ай бұрын

What were the ride plate adjustments you did to hit 80?

@brucecooley4170 7 ай бұрын

Maybe pump wedge? I think there was whole video on that.

@RM.Adventures_ 7 ай бұрын

He shaved down the rear of the ride plate to try and get rid of that hump.

@brucecooley4170 7 ай бұрын

Of course there is coolant in there so he must have done a ride plate autopsy(plateopsy?) to know how much material can be removed. Interesting. A pump wedge could get another mph.

@RM.Adventures_ 7 ай бұрын

@@brucecooley4170 He shaved enough to remove the dip.. We played it safe, if we shave to much there's no going back. This isn't a fix to the issue, it's just a budget friendly band-aid to the ride plate issue.

@kylewolf8094 6 ай бұрын

@@RM.Adventures_ use a belt sander?

@paullypark7924 7 ай бұрын

What rpm tune did this ski have?

@StangCartel 3 ай бұрын

Theu Most likely used HP Tuners or MaptunerX both are good.

@jaxcamino9356 18 күн бұрын

Hello everyone,i have a queation about my 2022 rxpx it s stock only has scom,yesterday was runnin 7900rpm-8000rpm np,then a hose from supercharger slip off i went back to shore put it back on wont hit over 7700rpm and top speed 70mph??? pls for some advice

@superk4562 7 ай бұрын

How did you come up with the 15 ft lb figure on the supercharger slip? The book spec is 71 -106 in lbs (roughly 6-9 ft lbs). What's the benefit of less slip? More boost?

@Mike-Rxtx 6 ай бұрын

Ths rule of thumb is 1ft lb per 1 psi of boost. These tunes are running the oem supercharger at about 15 psi @8500 rpm acccording to my data logs. These tunes are running the 8500 limit with goal range around 8300rpm.

@marksjetski 7 ай бұрын

How do you ride with no glasses??? All videos no glasses.🤓 Crazy 🤣🤣🤣

@mattcarter259 7 ай бұрын

Glasses are for girls

@calasworld 7 ай бұрын

I got tired of losing glasses. I’m testing, so I look back and they fly out.🤦‍♂️😂🤣😂

@Zionslayer1 7 ай бұрын

What's the top running RPM on both ski's?

@calasworld 7 ай бұрын

8300

@OmarVeras-bv7wi Ай бұрын

Can you please tell me were your doing your testing?

@wisinyandel6537 Ай бұрын

In Mexico

@FinsnFire 10 күн бұрын

I want to do an engine swap. 2020 fishpro 170 for 2024 Rotax 325. Can it be done?

@calasworld 9 күн бұрын

@@FinsnFire yes

@mikenegron6162 7 ай бұрын

Man I just got my ride plate back from getting cut by Riva...My 22 was running around 77-78 with a stage 2. Getting the plate installed Tuesday so we will see!!! BTW What "tweak" did you do without having to take that pain in the A$$ off...? Spill the beans bro!!!

@billy-bo-dilly 7 ай бұрын

tweak could have been something with the trim tabs....

@RM.Adventures_ 7 ай бұрын

Let me know how it turns out. hope it works out for you

@mikenegron6162 7 ай бұрын

I'm thinking maybe he used a planer to sand the high spots a little while still on the ski...I would love to know.@@billy-bo-dilly

@mikenegron6162 7 ай бұрын

Sure will..! I'm crossing my fingers that it will work@@RM.Adventures_

@mikenegron6162 7 ай бұрын

@RM.Adventures_ Tried the new (Riva cut) ride plate today. There was an improvement (1-2mph) and saw 79 @ 8300rpm... With stage 2+ I was expecting 80-83... I have an appointment with the dealer to check / re-flash the IBR sometime next week and will be checking for boost leaks & supercharger slip prior to that.