Thanks!

A little.. had them on my ford and duramax.. best airbag set I have ever owned

Video coming soon.. I have had all three new models. Going to run comparisons on them all with pros and cons

@@RockyRohde Thanks, looking forward to see it.

Yes.. I have 1” bora spacers on the front. I am actually fixing to change setup and will have spacers for sale if your interested. The spacers are on a video on my channel

I’m not sure which ones they were.. I believe I ordered f350 blocks for a 2017

I think about the same.. Tires make a huge difference.. ridge grapplers are stiff with hard rubber made to last.. mud graps are softer compound..

Prob 35x12.5x20… test fit one

It came with it

Removed

These were tapered also

From the site…

@@RockyRohde Ok Preciate it

The 2.5” coil replacement rides better than stock. On this truck I chose the Readylift because of my RV. The Carli coil is 3.25-3.5” lift. On my 24 when it arrives I am planning Carli Coils with ready lift radius arm drops. The longer the coil the better the ride. I dont recommend coil spacers. Most peeps install lift and tires at the same time. The tires and wheel size is the main key factor. If you run Carli 3.5 Coil and some 17” methods with 37” tires that will be the best ride. If your installing 22” wheels better get the Carli. For me 20” wheels on 37” tire with 2.5” spring is about right.

@@RockyRohde i plan on running 35s maybe 37s on stock 20s i have the same truck as u except black…why the readylift because of your rv? I have a 40ft 5th wheel thats why im asking

35’s you will be fine.. My 45’ toy hauler is 13’6” from the factory. With 37’s and 3” block in the rear it pulls about 1” low in the rear which does not look to bad. I like 8-10 inch of bed clearance so my rv is a little nose high by about 2”.. I just installed 2” lift to RV and I am planning to replace Coleman AC units with Mach1 low profile. This will take my total height of 13’9” back down to 13’1”.. it’s a 8” savings on height. 35’s will be no issue. I would do the Carli or Icon progressive coil with 35’s on 20” wheels. If you are running 18” wheels do the 2.5” ready lift with coils..

Thanks for the replys and advice..it was a toss up between the carli kit and pmf with the icons i know alot of people swear by carli thats why i was asking why you went readylift and for the wheel and tires ill be on the stock platinum 20s with a 35 mud grapplers or a mickey thompson mtz just because i dont like the rubbing with 37s

I like the mud grapps for many reasons. The tire is the best ride and is a soft rubber compound. They don’t last long and make noise but that makes this tire outperform others.. The 35 mud grapp does not carry the rating you will need. 35 has like 3400 each and 37 has 3850 I believe. As a second choice I would look at Toyo MT. It has an aggressive look and is my #2. Pay attention to load rating on 35 also. It is offered in a 80 psi and 65 psi. I really like that they offer a 35x13.50 for a wider look.. Up to u just keep an eye on load rating.

At the time of this video I think 1”.. My more recent videos have 2” shifted.

I used the air lift one. Ready lift was not available when I ordered it.

@@RockyRohde one more question is what 3” block brand do you have in the back

@@shadengray8563 ford oem.. I think it is a 2017 f350 block..

@@RockyRohde ok thanks love your content