Should have ckd the bow’s draw poundage and twisted up the cables to meet A to A. Would prolly been much closer to speed 🤷🏽‍♂️ I hope you do the new Highline review soon! Love your reviews! Best out there!

Thanks for cranking out the review, glad Hoyt scored with it.

Why is everyone complaining about prices Everything is going up this days. I'm in construction buisiness working with metals. This year alone material went up 50%. Don't expect to pay same as last year. Especially carbon bow.

Ok ok posing with the bows got me rolling over here hahaha

Sweetest bow I have pulled back in a while!

The ultra in my shop was a little under poundage and the draw was a little short, yours may be as well. I averaged 323 at true 29.5/70. It's probably still a little slow but not 17fps

I shot it today & I could not agree more with your assessment. My RX-5 last year was sold right after I bought it. This bow feels & Sounds a lot better than my PSE Levitate just wish it was a little faster.

Thanks for the reviews 👌🏻

I like your reviews and can appreciate the honesty of your opinions. One thing that I have to question is your chrono, it seems as if it reads consistently low on every bow you review. Is there any bows that hit the advertised speeds through that chrono?

Thank you.

I’ve been waiting for your review on this bow, it looks pretty sweet

Would the fact it’s long on the axel to axel mean that if you twisted the main string up to bring it into speck you might get more juice/speed out of it? And is that what you would recommend doing to bring a bow that’s out like that back in?

I would love to see the difference FMJJ gets outdoors on a sunny day with his chronograph vs in his shop. Lighting affects these things greatly. He seems to get slower speeds than other reviewers.

I am assuming you were shooting the #3 cam in the 30" draw position. No way that the #2 cam maxed out in draw would be that slow. I can 100% believe the #3 cam at 30" being that slow.

HOLLY MOLY 😄thank you my friend I’m glad I bought last year Hoyt torrex XT one just like in your previous video I’m using 350g fmj arrow as target practice after nearly year I still shoot with 331 fps for the price I paid is really fast 💨 and dead accurate I’m really impressed with to torrex XT LD (long draw ones) but come on 1800 is not just sound ridiculous but it is !

AND I said I'd never shoot Mathews. Well that's gonna change.

The thumbnail gets me everytime 😆🤣

That is a awesome looking bow. A lot of money

I wish you would measure the draw length on a draw board and the draw weight like you measure the other specs! Otherwise, good review.

1899 is outrageous no bow on the market worth that

Just wondering do you check the draw weight before your reviews, I've watch other reviews and sometimes the bow comes out of the box as low is 67lbs. Still awesome stuff thank you for sharing 👍👍

Mfjj I’m sure someone has already chimed in with this comment but I’m pretty sure the reason you came in so below ibo is because the specs they publish are likely 30” DL & 80lb limbs…thought I heard you say that bow was 70lb. Anyway just my $0.02. Nice review!

Lighted nocks aslo eats some speed, and the vane position with whisker😉

Shut Up and Take My MONEY 💰 !!! Getting one soon.

Can you do the hoyt rx7 twin turbo please!

How much does the whisker biscuit rest affect the speed vs a normal drop away rest?

You should start checking the sctual DL n Weight of each bow instead of relying on the mod chart. Also check letoff to get a fair n accurate speed check

Appreciate the honest comments. 1900 is a lot for a bow

Cool blog MFJJ I really enjoy your blog today. I'm a Hoyt fan I shoot the RX-1. That RX-7 ULTRA looks sick. What would you say would Good for my draw length I'm 27.5 draw length shooting 70lbs I was thinking that the regular RX-7 would be better for me. Please let me know what you would recommend for me buddy. Keep up the great work and content you put out I really enjoy it a lot!!!

According to google, IBO speeds are obtained by an #80 draw weight, max draw length, and a 400 grain arrow. Ata speeds are the #70, 30, 350.

The weight of that blows me away, even saying they aren't including the little knob. I mean for a carbon bow coming in at 5lbs. Jamon.

I notice you always use the biscuit to run these tests, do you think it makes it a couple fps slower? Just curious how much it could actually matter for ibo ratings. Love the channel and content man, watch all your vids when they drop. Whitetail bow hunter from New England

No check of actual draw weight, no check of actual draw length, whisker basket and I am guessing no check to see if bow is actually tuned tells me all I need to know about speed test. I appreciate your effort to do the review and take it with a grain of salt since the things that are controllable have not been addressed.

Why didn't you show the reflex measurement on this bow?

I debated Hoyt in the comments of their YT video. This bow shows a bit of change and definite improvement, but the aluminum bows seem to be basically identical. They keep getting more and more expensive, and don't really give that much more feature wise.

Any plans to review the Twin Turbo?

Have you done a video on the Twin Turbo? (Sorry if you have and I've just over looked it)

MFJJ how does this compare to PSE Levitate and Bowtech Zion? Any way you can do a carbon bow comparison video?

What type of release are you using in this video? Appreciate your videos!

Love your honest reviews, very knowledgeable person, however watching this review and your ventum 33 pro review are almost a carbon copy of each other..lol.. i was thinking i was losing it had to read the titles twice... lol.. with that being said price point aside which of the 2 bows would you go home with if you had to pick one?

I've had to get an rx7 module 2 and an ultra module 3 to swap the modules over to get a rx7 ultra with a number 2 module. Unbelievable mess about getting what I need in the uk but im curious do you think this may not work? I mean it's still a hbx pro cam and I cant see any discrepancies between the rx7 and the rx7 ultra when trying to just buy a separate module. This should work right? But the draw length range is different between the mod 2 rx7 and the mod 2 ultra. So I am gtn a bit concerned

I truly like my RX5 and it shoots amazing. The first high bow I ever bought. However, with all the issues I had getting accessories for the for my Hoyt RX5, issues with nearly all my local bow shops when it comes to dealing with Hoyt specific bows, the limited upgrades on the RX7, and the high cost. I think I am going to get the Mathew's V3X and use my RX5 as a back up. After watching a lot of the reviews so far it's going to be hard to beat the V3X. Sorry Hoyt, when you get your act together I will jump back on board. In the meantime peace out. MFJJ outstanding content! Keep the videos coming. Cannot begin to express how extremely helpful and educational your videos are for this newbie bow hunter. To bad you are not on the east coast.

Good review and fan of channel but idk what he’s been doing but his numbers are low. I’ve seen the rx7 ultra shoot a 408gr at 328 at 80# and I’ve seen multiple 70# setups get close to listed IBO rating. One big factor could be he stated it was out of spec at 34-1/4 and assuming he didn’t correct it or could just be his chrono. As others mentioned he’s always low compared to others and what I’ve seen in person. I will say unbiasedly that I had the V3X and the Ventum Pro and the Ventum pro feels HEAVY, so with the stock mini stabilizer he might actually be on point with the weight

Damn I'll keep my $400.00 bow.

Is the hump at the end of the draw the same or different between the Hoyt Carbon RX-7 (30" ATA) and Ultra (34" ATA) bows?

Time for a new crono....

With these new prices the bows should be maybe .001 off spec and IBO/ATA should be dead on.

Anyone know of any updates to the Ventum? I have this years 21 model and looking forward to a new design. I don’t like carbon bows.

Josh- what are the draw length on the two modules? I’m at a 28.5. You said the regular rx7 has a module that begins at 28.5 so it would be quite a bit slower than on the 30”

I think the bear bows are the only company hitting ibo or at least close

What do you think about Athens bows??

Hoyt doesn't think of the poor man

The RX-1 is the worst flagship bow i’ve ever shot, good to see Hoyt has finally caught back up to the competition with the RX-7. The Pro Defiant is still probably the best bow Hoyt has made recently. Maybe this RX-7 can beat it finally.

Is the RX7 totally made in the USA

Yah maybe don’t use a whisker when looking at speed. Put a decent rest on wit minimal fletching contact. You could be losing 5-10 fps with that.

32 draw length and 70 pound would prolly get 334 I think the numbers are made off max everytning

Please review the Hoyt 'Highline'.

center of axle. not outside edge to outside edge

What kind of lighted nock are you using?

I'll get one when the QAD rest contract expires. So I can get a dovetail limb driven rest and the picatinny sights aren't $500.

Sounds quiet on camera

ATA is 1/4” long and you still don’t measure dl or weight?

What draw release are you using in this video?

Are you going to do a rx7 30" review? If not what's your opinion on the 30" rx7? Thanks

Like to see the RX7 vs the V3X.

Just curious what letoff was the cam set at? The higher letoff can be faster due to cam loading slightly more

You've spoiled us. Now when I watch reviews and people just list the specs without measuring them I feel betrayed.

I have eight compounds, and at $1900 bucks, no way. No longer into hunt, no time.

I wonder if that Whisker Biscuit rest has any drag on the arrow compared to a drop away rest?

😂 I guessed 315 for the first arrow

You will get at least 5 feet a second faster without that whisker biscuit!

Lmao just saw a review on a PSE drive nxt shoot a 352 grain arrow @ 322 fps.

Make sure it's at 70

What's the axel diameter on this?

Isn’t the speed that Hoyt does done at 80lbs 30 inch 350? I’m just wondering

What about the highline?

You can’t shoot a wisker biskit and expect advertised speed

These bow companies won’t be happy till they have a price point over 2000$ no bow is worth that much and it doesn’t Even cost them 1k to make a bow they’re gonna price themselves outta business

How can they charge $1900 for a Chinese riser and Korean limbs?

Will this be a good first bow?

Good $&# the price is ridiculous

I can't see why a company would design a carbon bow that is heavier and slower than some aluminum bows.

What was the other 1900 dollar bow ?

So, spec weight = 4.3 lbs. As shipped weight = 5.2 lbs. Gosh, I thought the whole point of an expensive carbon bow was weight reduction. Even at 4.3 lbs, this item seems bloated to me.

Hoyt have priced their bows based on their egos i think. For me there are far better bows for far less. I could tell mfjj doesn't think much of hoyt. Alot of meh involved which i found funny. At least get your bows close to weight and IBO for $1900 hoyt. Personally id take a bowtech or mathews over this for $700 less all day.

So far the only 2022 bow review I have seen that the bow actually shoots IBO, is the new flagship bow by Bear archery. Disappointing considering these bows are selling for almost 2 Grand! WTF! My vxr shoots faster than that bow. Hoyt needs to quit lying and get their prices back down.

up your audio a bit buddy

You'll probably get 334 at 80lbs.

Wow so their 2021 carbon flagship is really a 320fps bow that's pretty sad. And its made in China wow

1800$ for a bow they can shove it

speed and weight.......

Again IBO is shot at max draw weight 30 in. bare shaft at the min. shaft weight that will not blow the bow up, shot out of a machine. Always has been a joke!!!

Even if it shoots 500 fps. I just can’t get over a 1900 dollar “carbon” bow that weighs 5 pounds. Just ridiculous. At 5 pounds what is the point of carbon.

Im really first???? lol

Lol. $1900.00. Wait, let’s see if something is wrong with the set up. The speed is too slow. You have got to be kidding me. Have some of the bow companies forgot that working people have carried the archery community? I like Hoyt, but not a $1900.00 MSRP. Be certain, Hoyt is a fine company. It’s not the only one with a very expensive bow. Please pardon my sticker shock.

If you think 1899 is expensive, just wait until next year because raw material cost are through the roof. Keep voting Democrat and keep whining about cost !!

This is BS..We archers just have to stomach these blatant lies these bow companies .

Sounds noisy.

No thx !! Way to much $$$$$$$

Way to heavy....