For anyone using this as a guide for a 2023 Kona - the drain plug on mine was 17mm and the filter canister used a 5/16th hex wrench for the drain plug underneath. The the big hex bolt around that is 27mm, not 25mm. It was over-torqued on mine so an electric socket wrench might be a good idea to have just in case, but it’s plastic so you’ll want to be careful!
@Pepster_p25 күн бұрын
All it takes is some measuring.
@Pepster_p26 күн бұрын
It’s a 27mm socket.
@picklelover47993 ай бұрын
Thanks
@adamwest771Ай бұрын
Man I'm sorry but please don't ever change your oil again. You don't dremel out a socket if it doesn't fit you need to try a bigger size. Also never use an impact on a plastic piece use a breaker bar. I hope you don't "mechanic" anything else 😂!
@tonywhite4257 ай бұрын
how often you change the oil?
@jaysgarage46237 ай бұрын
Manual says every 7500 miles, i do all my vehicles every 5000 miles for oil is cheaper than engine sludge build up. Oil filter cartridge torque is 18-22 ftlbs and oil drain plug is @ 30 ftlbs. I use 0W20 FS supertech oil from walmart (Warren oil) which they have been around for a long time ($18 for 5 qt), same oil as sams club brand. Only bad oil is a dirty oil.