2022 KLR 650 Accessory Power Locations (and relay)

Рет қаралды 14,082

Күн бұрын

This video show the locations of the three plug and play accessory plug an play power points. and where the relay is that feeds them.
Link to the relay.... www.3dcycleparts.com/KLR650-2...

Пікірлер: 74

@robbiesmith8515 2 ай бұрын

Thanks for sharing, very helpful!

@SHOVELCARD Жыл бұрын

this was such a great video, I'm saving it for when I do get a KLR

@craiglabue Жыл бұрын

Excellent again! Very well covered!

@raymondreid3958 8 ай бұрын

Thank you, that's what I have been searching for!

@adriancruz3360 2 жыл бұрын

I appreciate you for this useful video. Regards from Costa Rica

@brianmoto427 10 ай бұрын

Very helpful video, thanks for sharing Tim!

@Leiter85 2 жыл бұрын

Thanks for sharing! I’m about to purchase a base ABS.

@davestephens1993 Жыл бұрын

Thank you sir for the effort and education.

@alanreilly9056 Жыл бұрын

Thank you Sir, that was very helpful

@DS_motos 11 ай бұрын

Great video, very usefull. Greatting from Argentina

@mattsudman847 Жыл бұрын

Super helpful! Thank you

@jushirocepeda3031 6 ай бұрын

Excelente muchas gracias por compartir ! Saludos desde Mexico

@charlievandevord6613 3 ай бұрын

just purchase a 2023 base model. great info to know in the future. Thanks

@danreich4320 9 ай бұрын

Great info. Thanks.

@andrewperron5503 Жыл бұрын

Very helpful, TY

@holisticaustralia Жыл бұрын

Awesome, thankyou very much!

@larrylund1138 2 жыл бұрын

Wow! That's cool stuff Timothy. Here on the Central Coast Ca we still have good riding weather so I'm not tinkering I'm riding so I appreciate you checking that all out and teaching us all.

@nubtools 2 жыл бұрын

Thank you sir!

@anthonya8412 2 жыл бұрын

Good information thx

@markrusk2870 2 жыл бұрын

No fuse required…..all you need is a relay

@kevinvarner3254 2 жыл бұрын

Good info. Thanks!

@billbonu1639 Жыл бұрын

I think the new klr looks awesome stripped down.Im thinking about taking everything I don't absolutely have to have off and see how it performs with all the extra weight removed, fairing and all.as far as the bike not having enough battery,stator etc to power accessories, I wonder if you can add a capacitor to store juice like we used to do with our sound systems back in the day when the amps pulled more power than the battery and alternator could make we would put a capacitor.just thought to have enough power to run a bunch of extra stuff.

@bigdave6194 Жыл бұрын

Great video. My base has the fuse in the fuse panel. Quick question. When aux lights are plugged into that connector...do they come on when you switch to high beams or do they come on using a switch you put in the spot above the 12v socket space? Thanks

@levimaryott Жыл бұрын

I have a base model. Just needed the relay

@jimransavage2196 9 ай бұрын

Thank you for video!!! I have a gps that I had hardwired to battery on my old KLR. Zumo 396. I want to hardwire it again on my 2023 klr. Can I just attach the two wires to the accessory port after relay install? Running that wire back to battery seems stupid. I still want to do the power port install for usb charging but I want my gps hard wired. 2023 base model

@crispinleslie Жыл бұрын

Thats awesome information, thanks Tim. I have the base model with ABS and I'm adding auxiliary lights- I guess I just ground them to the frame somewhere ?

@2talltimadventures Жыл бұрын

The Acessory power leads are two wires. One a power and the other a ground.

@gilcomnz 2 жыл бұрын

Hi mate. Thanks for the video but you didn't really point out the connections very well. Cheers

@tysonsmith4699 11 ай бұрын

thank you so much for this been wondering if the base comes with these options just need to get the relays because abs sounds fucking annoying offroad thank you!!!!

@Scupper7 8 күн бұрын

After you add the relay are those auxiliary light spots running power all the time or do you need to purchase a switch to turn them on or off??

@MrGrant440 2 жыл бұрын

You are correct. That wire is there. I have the basic model.. I just had to add the relay and they was able to install the 12v plug and usb, i also didn’t add a fuse. And everything seems to be working properly. You going to hook up your hand warmers to that factory. Or are you going to just go to the battery.

@2talltimadventures 2 жыл бұрын

yes I did, just posted a new video showing this

@micah6872 Жыл бұрын

Hey Tim Thanks for sharing your knowledge. Is that the stock OEM USB port on the left side and if so where do you plug the connector in? Thanks in advance.

@danreich4320 8 ай бұрын

I could not tell either.

@Garland77 2 жыл бұрын

Do you have any idea what that connector is under the seat just a bit forward of the fuse boxes? There is a white tag very near it.

@2talltimadventures 2 жыл бұрын

I believe that is a rectifier plug, if i'm not mistaken there should be AC voltage on one side and DC voltage on the other. That allows the bike to run on stator even when the battery dosnt have power. I could be mistaken on the purpose but pretty sure they are rectifiers. I would leave them alone.

@micah6872 Жыл бұрын

Hey Tim just subscribed. Wondering if you have a video on how to remove the headlight assembly? Thanks in advance and ride safe.

@2talltimadventures Жыл бұрын

No I do not. Its not terriblely hard just takes time and patience. Once the bike is stripped of the windshield and nose fairing it's just a few bolts. I no longer have my bike or I would do a video for you. Sorry I couldnt be of more help.

@deltahotelxray 2 жыл бұрын

You can probably get a relay at an auto parts store for $5.

@jackmarks2176 Ай бұрын

Base model has fuse in it already, or mine did anyway, 2024 S model.

@Perkypartyparrot Жыл бұрын

Hello, do you know what connector I need to attach auxillary lights to the factory leads?

@2talltimadventures Жыл бұрын

No I do not. It just cut it off and put in basic bullet connectors

@cryagen2105 25 күн бұрын

There's another white capped power lead in the "bucket" beside the heated grips connector you pointed out. Is that another open ignition powered port?

@2talltimadventures 25 күн бұрын

@@cryagen2105 my apologies it's been while since I made this video. But if I recall there were wires coming out of the other side of that connection. Might not look that way in the video but I believe it did.

@abeiam1357 5 ай бұрын

Hey Tim I have a traveler model as well. Could I connect the tusk heated grips to that OEM connector plug that’s under the gas tank or the one next to it? Thanks in advance for the reply

@2talltimadventures 5 ай бұрын

Yes that's where I connected mine. Just have to cut and make your own terminals since the factory one is specific.

@abeiam1357 5 ай бұрын

@@2talltimadventures ok thanks

@adventurebikesaustralia7627 Жыл бұрын

Hi Tim, I’m adding a twin USB port on the right, and a 12v socket on the left, to my ‘23 base model by here in Australia. I have hooked up my twin USB port on the right side to the green terminals and it works fine, but can’t work out where to connect the 12v terminal on the left. I couldn’t make out where the connection is on the right. Are you able to give some hints? Cheers!

@2talltimadventures Жыл бұрын

I believe they both use the same power feed/ wire. Mine has the OEM ports on it and they are both connected to the same one just behind the speedo cluster. I tapped into it for my GPS also.

@adventurebikesaustralia7627 Жыл бұрын

@@2talltimadventures Are you referring to the green connectors?

@2talltimadventures Жыл бұрын

@@adventurebikesaustralia7627 yes the wires with the green covers on the connectors. All my front accessories are tapped into those.

@adventurebikesaustralia7627 Жыл бұрын

@@2talltimadventures So should I splice the left and right ports (1 x USB and 1 x 12v) together and then one connection from there into the green?

@2talltimadventures Жыл бұрын

@@adventurebikesaustralia7627 I think that's how mine is from the factory. So yeah thay should be fine. Not much draw on those types of things.

@kevincosby1632 Жыл бұрын

I bought a 23 S model and all it needed was the relay to power everything up, fuse was already there.

@2talltimadventures Жыл бұрын

Very nice. Hope my information helped you out.

@darrenhitz Жыл бұрын

I am a rookie. How do I marry that AUX white connector to my AUX lights. just bullet connectors?

@2talltimadventures Жыл бұрын

Yes that's what I did. Bullet connectors and heat shrink.

@ronaldprince435 2 жыл бұрын

So add that relay then add your lights and switch inline with lights?

@2talltimadventures 2 жыл бұрын

Yes, the relay plugs into the factory wire harness and that will power the accesory leads. Then yes put a switch between the leads and the lights

@Andy-bd2xe Жыл бұрын

How do you connect to the white fog light accessory plug near the relay? What type of connector is it?

@2talltimadventures Жыл бұрын

I'm unsure what it is. I cut it off and used my own bullet connectors.

@Andy-bd2xe Жыл бұрын

@@2talltimadventures okay thanks!

@user-gz5ln3tf5t Жыл бұрын

To What power source did you connect the gps.

@2talltimadventures Жыл бұрын

Tapped into the bullet connectors behind the dash that the OEM USB and power ports are also tapped into.

@MrGrant440 2 жыл бұрын

I have also heard the 2022 model has more power for running all of that stuff!

@2talltimadventures 2 жыл бұрын

yes it now has 26amps of charging power vs 17amps on the previous models.

@terrymiller5246 2 жыл бұрын

@@2talltimadventures Tim, where did you get the 26Amps from? The manual states 80watts max for aux connectors, which is only around 6.6Amps. page 82 in the manual states that drawing more then the max of 80watts from Aux could cause the battery to drain.

@2talltimadventures 2 жыл бұрын

@@terrymiller5246 26 amps is the output power of the charging system

@terrymiller5246 2 жыл бұрын

@@2talltimadventures thx for the quick reply. I can't find any place that states the charging system is 26Amps.

@2talltimadventures 2 жыл бұрын

@@terrymiller5246 here is a article thays says it. ultimatemotorcycling.com/2021/01/26/2022-kawasaki-klr650-first-look-14-fast-facts/amp/