Tape your brake lever back & leave overnight. This will get rid of air bubbles in the lines & lever should firm up.
@Yamaprilia Жыл бұрын
I will give it a try
@oliverdeacon6840 Жыл бұрын
I’m not sure if oil temperature is accessible, but you can see the coolant temperature if you go into the first “My Vehicle” display tab
@tonimagg10 ай бұрын
Stock brakes no issues. Pads and discs more then capable.
@Yamaprilia10 ай бұрын
The discs are the weak point. Only 4.5mm thick and only 5 mounting points. I fitted 5.1mm discs and they were great
@tomquaker10 ай бұрын
good vid, i’m in the same boat, heavy, need new springs, otherwise the bike suspension is bloody rough. Also, want better pads at minimum, and better fluid, then we shall see if MC, etc will be needed. The bike does get high very quickly and fans are on prompto, i’m just ignoring for as long as there is no harm, defects
@Yamaprilia10 ай бұрын
Whats your weight? Also the fan being on is not too much of an issue, its just how noisey the fan is. My aprilia fan is so much quieter you barely know its actually running!
@tomquaker10 ай бұрын
give or take, 300lbs suited.. i can feel how front suspension gets squished, under smooth, but persistent hard breaking, then i’m riding on what the tire can do for me in terms of rebound, as suspension is all compressed
@Yamaprilia10 ай бұрын
@@tomquaker 300lb translates to 136kg!! The bike is designed for 85kg riders so your springs are hugely under rated for you. You would benefit from 11.0 to 11.5 springs with the damping slightly wound off. If your in the uk I can help and I have 11.0 springs in my garage.
@rcfrenzy647710 ай бұрын
Lovely bike,Keep safe.
@merjful7 ай бұрын
Can you provide a link of the front springs you bought. I want them for my 2023 m1000r
@Yamaprilia7 ай бұрын
I just looked and they do not have any listed at present, maybe ring them. store.ktechsuspension.com/?find=BMW_S1000RR_2023
@alialtajer81077 ай бұрын
Hi , im owning s1000rr 2015 and 2024 im not happy with the break of the 2024 can you send me the link for brembo calliper?
You're using too much travel you should be able to tell on your tires how much travel you're using by the wear you should probably fix that
@msanc3153 ай бұрын
Get rid of the garbage torx and change your bolts to Allen and thank me later.
@Yamaprilia3 ай бұрын
Got rid of the bike instead 🤣
@Darrenjames-rl2jf Жыл бұрын
temp is available in my vehicle screen with the tyre pressures etc
@Yamaprilia Жыл бұрын
What about viewing it whilst riding?
@Darrenjames-rl2jf Жыл бұрын
@@Yamaprilia yes you can keep the screen on or view it while riding
@shy231__6 Жыл бұрын
how comes you didnt go for forged wheel option....would of been worth it the amount of track you do
@Yamaprilia Жыл бұрын
I had them on my last s1000rr and didnt notice any difference in performance other than the 0.5mm thicker discs. The forged wheels were £1350 extra option and I believe the money would be better spent elsewhere. They do look ace and if a set come up for sale I may buy them one day but standard wheels are light enough anyway
@QuarantaQuattro Жыл бұрын
Where did you get that red ring for the top of the suspension?
@Yamaprilia Жыл бұрын
It is a full internal from a M1000rr
@Darrenjames-rl2jf Жыл бұрын
ow and where did you get the fork internal from with the rebound adjustment?
@Yamaprilia Жыл бұрын
There were some for sale on ebay. M1000rr / S1000rr base model internals
@geucamole10 ай бұрын
Spending the money to upgrading the brakes instead of, for example, wheels, exhaust system, etc. sounds a bit odd for me for this bike.
@Yamaprilia10 ай бұрын
Why is that? The brakes are the weakest point being only 4.5mm thick discs
@geucamole10 ай бұрын
@@YamapriliaI am surprised you felt the brakes needed to be changed, because I have a 2023 s1krr and brakes feel great. I am not saying upgraded brakes are a bad idea, but for this bike it is lower on the list unless I am racing it or something. Full exhaust and Bren tune would probably be higher in my list, since they will make the bike run cooler, better, and drop some weight. Forged wheels or carbon wheels are a great upgrade (I have the forged) because it really makes a big difference in handling and unsprung weight. After that I would start looking into brakes for full adjustability and stuff. But, that’s just my opinion of course 🤷♂️ I wouldn’t say the brakes are the weak point of this bike.