2023 Can Am Outlander PRO HD7 adding winch and finishing touches ready to ride

Рет қаралды 7,521

Жыл бұрын

Installing a new winch and putting the finishing touches to the new HD7...
Music "Morning Blue" by Josh Woodward www.joshwoodward.com
Check out the Pod lights and accessories from NovSights www.novsights.com
Check out Finntrail Wading Gear at www.finntrail.com Use "Rob Farrow ATV" code for 10% discount! Best in outdoor gear!
Check out www.arrowatv.com/ for Awesome Can Am Outlander Aluminium Bumper Corners! These corners come with a Lifetime replacement should they break, just pay for shipping.
Please check out my other Channel Outdoor Rob / @outdoorrob for Adventure and Abandoned themed videos! Thanks!

Пікірлер: 34

@tomsmelderis Ай бұрын

wintch i think is supposed to go the other way around, under the plastic cover on left side you will find designated place for the wintch relay, there is specific place to take the ground, then all thats left to do is just to route the + cable, witch from left side is easy.

@RobFarrowATV Ай бұрын

Thanks Tom!

@vancemarin8022 Жыл бұрын

Well that was a fairly painless install ! All those covers look nice but are a pain when you need to get under them.

@RobFarrowATV Жыл бұрын

The covers come off pretty easy, especially compared to the original design they had. Thanks Vance!

@olivei2484 Жыл бұрын

Like the battery terminal set ups. Pretty handy. Need to install the light bars while you have the covers off.

@RobFarrowATV Жыл бұрын

Thanks Fred! I installed the 2" pod spot lights, so we'll see if that's enough light. This model has the new LED lights, so they will be brighter than the old stock ones.

@olivei2484 Жыл бұрын

@@RobFarrowATV I saw that, I wrote the comment prior to finishing the video. I can't edit comments while on my tablet.

@RobFarrowATV Жыл бұрын

No problem Fred.

@markworth7609 Жыл бұрын

Looking good,feeling good lol 😂

@RobFarrowATV Жыл бұрын

Thanks Mark!

@jtownguitar5 9 ай бұрын

Just installed mine tonight ! I realized you don’t have to splice into the ignition as they have an accessory lead that runs up to the opposite side !

@RobFarrowATV 9 ай бұрын

Nice, I missed that, thanks! Happy Trails!

@greyhound_6.721 9 ай бұрын

Any pictures of that accessory lead ?

@RobFarrowATV 9 ай бұрын

I don't have any pics of it, have to look next time I take it apart...

@donnyovercast3559 2 ай бұрын

@RobFarrowATV did you happen to get any pics of the accessory lead yet? I'm about to install a winch on mine too.

@benmayhew373 6 ай бұрын

I'm just about to swap the steel cable out for synthetic rope on my 2024 outlander 700 xt and I need a hawse fairlead. What is the distance between the holes? I keep my Quad at my Mother's house and I forgot to measure it. My new synthetic rope arrived today so I'd like to get the hawse fairlead asap. Thanks!

@RobFarrowATV 6 ай бұрын

Measures 4 7/8" You'll like the synthetic rope much better. Thanks!

@markworth7609 Жыл бұрын

Rob are you going to be able to run the winch and the throttle at the same time

@RobFarrowATV Жыл бұрын

I had thought about that, mind have to bend a couple of fingers in strange directions LOL! I can easily switch it to the other side if needed. Thanks Mark!

@michaelbennett9813 Жыл бұрын

i thought for sure that you would have bought an XMR this time !! I guess we will see how you modify this one to suit .

@RobFarrowATV Жыл бұрын

LOL! No, I'm done with the extreme mud riding, sticking with exploring and trail riding. Thanks Michael!

@cameronschneider4314 4 ай бұрын

Hey Rob, I’m just curious. When winching another ATV out of a hole, what gear should I be in if in stand still and is it damaging to pull someone out in reverse. Thank you.

@RobFarrowATV 4 ай бұрын

I've pulled with the winch and pulled with the atv in reverse and never had an issue. Usually I'm in neutral though with the brakes on and winching while they slowly try to drive in low gear. I don't pull anyone dead stick, they must be slowly trying to ease their way out at the same time I'm winching. Using a pulley to double the pulling power also helps a lot. For the most part I don't winch anything bigger than my machine either.

@cameronschneider4314 4 ай бұрын

That helps a lot. Thank you!

@mjuhanil 11 ай бұрын

You should bring it out to the poker run in Red Rock this Saturday

@RobFarrowATV 11 ай бұрын

I probably will, thanks!

@hashtagjustadad5110 11 ай бұрын

Im curious as to why you went with this brand Winch rather than the one that Can Am typically uses. It seems like the Warn brand that Can Am uses is more “plug and play”. Genuinely asking.

@RobFarrowATV 11 ай бұрын

I didn't have any good luck with the Can Am Warn that came with my '16 XMR 850 and the Canadian Tire brands work just as good and a lot cheaper. I don't like this "Eliminator" winch though, too noisy and extremely slow. If I had to buy another one I'd go with the "Champion" one which I've had in the past. Thanks!

@hashtagjustadad5110 11 ай бұрын

@@RobFarrowATV good insight. Thank you.

@RobFarrowATV 11 ай бұрын

No problem...