💰There's currently a CubeHead sale on The Cubicle with HUUUUUGE discounts! WRM V9: www.thecubicle.com/products/moyu-weilong-wrm-v9-3x3-ball-core-uv?p=B1mzfNPx-w GAN 13: www.thecubicle.com/products/gan13-m-maglev-uv-3x3?p=B1mzfNPx-w TORNADO V3: www.thecubicle.com/products/x-man-tornado-v3-m-magnetic-core-maglev?p=B1mzfNPx-w

Who needs the Avengers when we can have an amazing CubeFace flagship battle video.

JPerm just made a video about rounded corners and its relation to corner twists Looks like moyu forgot about why it switched to squared edges lol

Great review Milan! it's so cool to see so many competitive flagship cubes out now. And even better, people can go with the V3 Flagship which is even cheaper and not as fast because it has springs. I absolutely love that puzzle.

Thank you sooo much this vid helped a lottt!!❤❤❤

i still wanna get wrm v9

Love these more performance and well rated videos!

im in love with the tornado v3. im using the flagship model and its my absolute favorite

IVE BEEN WAITING FOR THIS ONGGOD

I was waiting for this!

Your videos are always so entertaining Great job.

This is what I've been waiting for!

Love my Tornado V3. Thanks for the video!

If I'm being honest, I actually like the direction MoYu are going with their cubes, I do not think removing magnet adjustment is a bad thing as most cubes (minus the GAN 13 and the 12 to a lesser extent) haven't really nailed the execution and they end up changing on their own and just have more crevices for dirt and lube to build up. I also think that MoYu haven't done anything wrong keeping the old adjustment system as I think it is solid and probably the best out there other than the tornado. The only thing I wish they would do is provide non maglev models with core magnets as they would sell much more than the just maglev variants and would probably be most cubers preferred option.

i feel like moyu spring and screw adjustment is perfectly fine, because it’s simple and it’s what some people are more used too

just love these type of videos

For me the cube with the best dual adjustment is the TengYun v2 because you can use it as a normal dual adjustment but if you don’t like it because you want more options you can use the springs. Anyways great video, I really like this channel

Great Video Man Keep Making Uploads like this you never seem to not entertain me

Nice Video. Again. :)

bro i literally searched for this exact kinda vid yesterday and here you are wowthank ubrooo

Que batalha! Me ajudou muito na minha escolha! Obrigado! Como eu tenho um problema com corner twist devido meus fingertricks não usuais acabei optando pelo Tornado V3, mas eu acho muito legal o conceito de ímãs repelentes do V9

Great video man. ALTHOUGH this is what we expect from Cubehead, the goat of cubing in KZfaq.

All of these cubes have really upped there game. You never fail to entertain us and you explain everything so well. Thank you for helping new cubers get a new feel and a professional view so they can know which cube is good. Thank you for entertaining us and being great at everything you do.

ur back on track man

Amazing and informative video. Can you please make a short of YS3M vs Gan13 vs TornadoV3 (I think more people would pick the YS3M over the WRM V9).

Every single video you make is AMAZING

Love the comparison format, but why is this on your second channel?

I have used GAN 11 M Pro, Tornado V3 Poineer but recently got the 12 ui freeplay. It actually owns the Tornado IMO. Do a video about it if possible pls.

Great video anyways！

I had the gan 11 duo and upgraded to the wrm v9 and I absolutely love it. Solving it just feels so satisying.

Milan never fails to entertain us❤

I really like the Gan and Tornado cube. Feels soft not very loose and very good for speed cubing

I am using a moyu wrm 2021 lite version for 2 years, at first it was amzing now how many times i cleaned and lubed it feels blocky and the turning feel is also not good, so i want to purchase a gan 11 m pro or gan 13 m uv, i like cubes that are efortless to turn and i dont know how gan cubes feel, which one do u prefer?

Actually, i don't mind the non-adjustable magnets. I have the ys3 m and the magnetic strength is really good, but a cube with better alignment is always an upgrade.

Can you show how you set up your Tornado V3?

My cubes ranking: 1. Tornado V3 2. MoYu WeiLong WRM V9 3. GAN 13 & MoYu Huameng YS3M 4. MoYu RS3M Super 5. MoYu RS3M 2020 & GAN 11 M Pro 6. GAN 12 MagLev 7. MoYu WRM 2021 MagLev

Yoooooo cube faceeee!

i love the tornado v3 it just fits me perfectly

Which one better rs3m 2021 maglev, ys3m magnetic or wrm v9 magnetic standar? Help me choose 😅

Cubehead his subs are going crazy on the other channel, damn! Couple days ago its was around 800k, now he's already on 813k 😮 Nice vid

Yoo, Milan any new merch on the way? Great video btw

Honestly, I think that a lot of people are forgetting older cubes that are still very good, cubes like the Gan 11 m pro and the wrm maglev with core magnets are all still viable and can compete with the latest cubes since there hasn’t been that much of an increase in performance for a while.

So happy that he made this

4:07 Hmm. I would like to know people’s thoughts on this. I don’t see this as a disappointment, I actually really like what MoYu is doing with the tensioning. If you buy a MoYu cube once, and then later buy another, then you know how to tension it already. Plus, I don’t see why a screwdriver is so bad. All the other brands just use a glorified version of one. And in this cube, the tools don’t break easily, and are very straight forward. For those who didn’t see a preview for the GAN 13 before it came out and you bought it, how long did it take you to find the adjustment tool? Furthermore, while one of the tensioning tools IS plastic, it isn’t used a lot in easily-breakable situations, meanwhile the tornado has a thin plastic stick that is in a very high-break risk scenario. And GAN, although fixing their ways with GAN 13, has used mostly very confusing plastic tools to tension their cubes. And also, the GAN cubes have all had a different way to tension it, making it confusing for people unused to the brand. I would love to hear everyone’s opinion on this. I really think that this is the polar opposite of a disappointment, but I will keep an open mind, and will try to hear you out.

This is WWWAAAYYYY bigger that the avengers and helped me to decide my main cube. Honestly, who needs the avengers when we need have amazing Cubehead and Cubeface?

My birthday is on the day you made this channel!

I got the tornado v3 flagship in like march and the ys3m ball core a few weeks ago, I much prefer the tornado and am very tempted to put the maglev from the ys3m in to my tornado

Tingman and cubeface uploaded at the same day, what more can I ask for.

Another day another medicine of laughter

Is there a difference between uv coated and frosted coated because in amazon the uv coated cost 80 euros but the frosted coated costs 40 euros if you could reply it would really help :)

This is the video we waited for... and can you try the MsCUBE MS3X 3x3 Magnetic?

This week's my exam week and cubehead motivates me a lot

I love your yooo intro so much

Yooo cube head I have the gan 13 maglev fx also nice video now I know how to adjust the tensioning system

My problem with my moyu was when one of the center screw was suddenly removed and I don’t know how to fix it evenly with other centers.

Hi, nice comparison. So far I've been using the Tornado V3 as my main cube. Although I have to admit that I'm not really a speedcuber, I use the cube more to concentrate, switch off and calm down. Stress relief. 30 seconds is enough for me. I use Roux because it's almost completely intuitive. Still, I try not to be too slow. And that's where my problem with the UV coating on the Moyu comes in. It's much too slippery for me. I know this from the GAN, where the UV lacquer is really sticky. Is it just me? The V9 is slippery :-(. The times are not good when you're running after the cube...

Each time my mood isn't right I just watch cubehead and like nothing actually happened

I just ordered from the cubicle, and used the discount code Cubehead😂😂.

Honestly my favorite cube is the tornado but I love the other two too.And by the way your videos are the best and I always enjoy watching them.❤😊

Out of the three, the V9 feels amazing, I’m on the slower end at sub 30 so i love it but I could see it being less reliable if you’re a sub 10 solver. it’s auto turn is slightly better than the gan 13. UV coatings are super similar. I main the tornado v3, but my favorite of the three is the V9

can you review the gan 14 maglev on your main account

tomorow i will get my tornado v3 and im so exited

Cubeface pls make a vid on the best budget 3x3🙏🙏

Quick question- Why did you not upload this video on CubeHead?

anyone else love the wrm 2021 maglev? i installed the corner magnets myself and its my best cube. im curious how it stacks up to the wrm v9 and the tornado v3. i see the tornado was used to beat the world record recently, to me this is a promising sign. i also love the blue internals on the v9, but not as much as i love how you can see the purple internals at a partial rotation for the wrm 2021, while the v9 has colored corners instead. i wanna try out a special coating and idk which cube yet! i also see they have a preorder for a moyu super wrm on SCS

The YOO at the beginning never gets old

CubeHead never fails, he reads our minds and gives us what we needed, a FLAGSHIP BATTLE as it is sometimes hard to choose between so many amazing options, 1 doubt though, you said 1st that the Flagship was the best version, is it still or the Pioneer is better?

Tha start 😂

It's funny what you say about the V9. I've left it exactly as it was straight out of the box. Its speed is just what I've been looking for in a cube, the nicest cube I've ever used. I've got a Tornado V3 and it doesn't matter what settings I use, I just can't get it to come close to the V9.

My fav dual adjusment is the moyu as it is so simple , however the tornado is quite easy to forget so if moyu change there should be two versions of the adjustment system the OG and whatever new system

Hey cubeHead, why haven’t you posted on your main channel in a while? Is this your new main?

Nice video

make a video that compers all the timers pls

Why are you not posting on your main channel??

Honestly I have zero problems with the moyu dual adjustment system. Screwdriver takes almost no space in my everyday carry, I throw the compression tool in my cube bag, and to be quite honest I just don't change the settings that much on my ys3m. Sure there's potential for uneven center travel but idk just turn (the screwdriver) more accurately. It's not hard to trial and error your way to an evenly adjusted cube and if you're buying the flagships you should know how to do that anyway imo. Realistically the screwdriver system is losing you at most like 10 minutes over the entire lifetime of your cube and I just don't think that's significant enough to dock points for

Are you gonna update the regular YooCube to the V9? You updated the eco and the deluxe 🤷‍♂️

can you make a video about Max Park's 3.13 world record?

Rs3m super vs ys3m vs wrm v9 comparison

please 🙏 tell me should I get the tornado V3 flagship or the Rs3M v5 ball core UV 😃

my current main is the gan 11 m pro. my previous main was the tornado v3. the tornado v3 is much simpler to change the settings, but the out the box experience was very bad to me. sandy, lighting fast, corner cutting felt bad. after changing the settings and adding lube( martian and nebula at speedcubeshop ), it instanstly felt much, much better. the out the box experience for the gan was much better, but changing the settings, specifically taking out the center caps, was much more difficult. overall, both cubes are amazing, but the gan felt a little more satisfying to turn.

What is your favourite cube out of these 3 cubes

Hi cubehead, in several videos when you say "reverse corner cutting", you're actually showing a forward corner cutting. 5:40

I used your discount code on lube and a pyraminx the other day!!!!!

cubeface pls made a review of the gan 14 pls ur vid is awsome !!!

Why Are you arent uploading Videos on your oteher chanel

I bought my first tornado v3 because of you

I like using discount code, Cube head

3:25 his reaction to tha ball core had me dying 😂

I was shaking man I just got the tornado v3 and I dont have the other 2 and you posted this like 13 days after I got it so if you said that one of the other 2 was better I wouldve been so sad

Nice

you should remake this video but with ys3m and gan 14!

the moyu cube has circler corners so it can easily have corner twists

And I like using discount code, Cube head

The fact that the v3 is cheapest among its rivals and still wields the crown is amazing.

After some years, my main, the gts3m was finally dethroned by the wrm v9. Best cube i've ever tried

Those 3 cubes are more expensive than all my cubes combined 😂

these videos are better than the ones on the cubehead channel

I don’t like that you can adjust the corner magnets on the GAN 13 maglev.

When is the new yoo cube (wrm v9 probably) coming?

can you do a tornado v3 unboxing