Thanks!

Thanks!

This one is 16K lumens. Epson's are great for this type of mapping.

@SeasonedProjections thanks. I'm looking to get a few new projectors for a fixed install setup on the new house. To get the general results I want I will need 3 of them (I used mad mapper). Having sdi will make this a lot simpler to set up

@dustinnavarro6419 noted and agree with you. Video is done live over hdmi to blackmagic sdi converters and out to 2 current projectors 4.5k lum 1080p that hit the front and 1 side. The red is fine but I'm only covering apx 1/3rd the house going brighter and a tad wider I wand to wrap the front and sides as they are all visible from the street. I current convert sdi back to hdmi for my current setup. The show runs on a pc with mad mapper and an nvidia Quatro A6000. I blend the overlap in madmapper and us a lux meter to check the blend. I also have a DMX bridge and about a dozen moving spots and gobos and 4 laser units Everything syncs

@@ZoeyR86 All of what you said is way over this old man's head. As for the video... wow.

@willease that's OK 👍 👌 If I bust it down. My current setup is 2x Epson 1080P projectors they are attached to a pc running Mad Mapper. That pc has some moderately high-end hardware that can run up to 6 displays in perfect sync. This lets me overlap the aera the projectors aim and use fades to blend them so I can project on curves and around corners with very little distortion. My house is a tall single story 4800sq ft with a large round front room on a corner lot