2023 Honda Pilot Front Bumper Removal and Grey Bumper Trim Delete

Рет қаралды 9,211

Жыл бұрын

Just a really quick video on how to remove the front bumper to remove the lower bumper garnish. I swapped mine to the black garnish instead of the grey colored piece. This ended up being quite a pain and goes much better with two people. It might be possible to get this piece out without removing the bumper but it's extremely difficult with how the piece clips into the bumper. You do not need to jack the TrailSport up; but in this case I did to make the process easier.
Black Sport Garnish Piece Part Number: 71115-T90-A00 MSRP as of this upload: $74.48
Plastic piece the bumper attaches to: 71198-T90-A01
**REMEMBER TO USE MY JSPORT DISCOUNT CODE: 503PDX at check out to save 15% off your purchase!!
jsportusa.com/
-----------------------------------------------------------------------
Music by Hotham
Stream: linktr.ee/hothammusic
Free Download: hypeddit.com/hotham/runfree
-----------------------------------------------------------------------

Пікірлер: 35

@igorcampos Жыл бұрын

Felow Portlander/Ridgeline owner (had a 20BE that I just traded in for a 23BE) here. I’m glad you’re having fun with the new baby but also sad to know you ditched the RL 😂😂😂 Thanks for putting out so many good content. Just found out your channel and subscribed.

@503pdxCars Жыл бұрын

Haha well I love the ridgeline. After 6 years of the platform just wanted to try something new! Hit me up if you have any questions!

@izmirp.9400 Жыл бұрын

Thanks for the video. I have a 2019 and would like to replace that trim for a newer one. Do I have to bring down all of the bumper to replace it?

@chunlintang9910 7 ай бұрын

I want to know how to remove the rear bumper?thank you

@user-ut8cf1gm8g Жыл бұрын

Congrats on the new pilot. How do you like tires and road noise vs the falken and ko2’s that you had in the past? Thanks man.

@503pdxCars Жыл бұрын

Thanks! I actually have a video coming. The OE tires have virtually no noticeable road noise. They're quite impressive for a light AT tire!

@fishytank1land Жыл бұрын

Looks good! What did dealer say about the floor mats not fitting?

@503pdxCars Жыл бұрын

Still haven’t had time to take it in. Maybe this week

@jechelon Жыл бұрын

I myself have a touring and was thinking of doing the same. When you take out the gray piece you’re left with exactly what you have as the end result or did you buy a black center piece?

@503pdxCars Жыл бұрын

You have to purchase the black trim pieces to replace the gray piece you remove

@12Jsilva Жыл бұрын

Considering there was no screws for the silver trim on the bumper, is it possible to just pry it out slowly?

@503pdxCars Жыл бұрын

Yeah you can, it’s just very tedious to do

@DeAgingTechnology 6 ай бұрын

great video!!....question: isn't it easier and cheaper just to repaint them?

@503pdxCars 6 ай бұрын

100% lol

@devin_the_dude_3 Жыл бұрын

Where did you order that piece from and how much was it If you don't mind me asking?

@503pdxCars Жыл бұрын

I picked it up from local Honda dealership, with prices changing constantly I’d call your dealer or check online for current pricing

@chunlintang9910 11 ай бұрын

My car is 23pilot and I want to change the front and rear bumpers to black too! Where to order bumpers?thanks

@503pdxCars 11 ай бұрын

Just from my local dealership :)

@chunlintang9910 7 ай бұрын

@@503pdxCars Thank you, I have purchased it, but I don’t know how to remove the rear bumper. Could you please give me a tutorial? Thanks

@joseb1643 Жыл бұрын

Can this piece ( lower silver) be replaced without removing the bumper?

@503pdxCars Жыл бұрын

I do not see a way to do it without removing the bumper

@12Jsilva Жыл бұрын

Plastidip… seriously thinking of doing plastidip on mine 😂😂😂

@KB-yi8pq 7 ай бұрын

@@12Jsilva I’ve got an TrailSport on order and I think I’m gonna do that first. Give it about 5-6 thick coats to help with rock chips etc. lol

@Bisdak.3475 9 ай бұрын

How did you removed the clip holding the trim by the headlight? TIA

@503pdxCars 9 ай бұрын

Which clip are you referring to? Once the screws were out, everything just pulled out, with a bit of wiggling

@Bisdak.3475 9 ай бұрын

@@503pdxCars the black trim just below the hood line, I called it unibrow :)

@BackDoor_Adventurer 6 ай бұрын

Looks so complicated, I’m here just wanting to swap my OEM fog lights to Amber/Yellow . 😢

@redcapote4760 3 ай бұрын

Bro, I've changed my fog lights out. You don't need to do all this. It's super easy. Just take out the lower two screws that he calls #1 and #2 at 0:47 to 0:49 ... then remove the clips above screw #2 (there are 3 clips between screw #2 and screw #3). Once you do that, just move back the plastic fender enough to be able to stick your arm into the hole where the fog light is. The fog light has 4 screws. The wire that you need to remove from the fog light is an L1B connection and you have to depress it on the bottom side rather firmly to get it to come undone. Wiggle it while you depress it.

@stevetran3836 7 ай бұрын

Is this doable without removing bumper?

@503pdxCars 7 ай бұрын

Not that I’m aware

@ZZ-rk8zu Жыл бұрын

Can't you just wrap that gray piece instead of all that removal work?

@503pdxCars Жыл бұрын

Possibly, but the area around the grey piece is matte, not gloss and it's not a very smooth surface for a wrap to adhere to. For $100 or so, it was worth it to me to just buy the black piece

@rjadragel 10 ай бұрын

I dont understand why honda didnt make this shit standard. I guess more money for them smh

@redcapote4760 4 ай бұрын

My thoughts exactly. Friggin gray on the front and rear. Makes no sense. Just put the black on and then put the black H-Mark Honda emblem on the rear while you're at it. Sigh.