2023 KTM 300XC Secret Mapping? | KTM Secrets?

2023 KTM 300XC Secret Mapping? | KTM Secrets? | Highland Cycles

Рет қаралды 13,786

Жыл бұрын

Is there a way to make more changes to the 300XC mapping?
Join Our Crew : bit.ly/2SHy1Fk
Want to buy me a coffee www.buymeacoffee.com/highland...
Want to support us and save money?
www.leadingedgesupps.com/ Use code “highland"
extreme-parts.com/ Use code "highland10"
veemototires.com/ Use code “highland"
If you want to support this channel on Patreon, here is our page:
/ highlandcycles
If you like to shop on Amazon and you want to help us out, use this link www.amazon.com/shop/highlandc...
And then shop for whatever you want. It really helps us out a ton and we appreciate it very much
Want some Merch? bit.ly/39rkdXm
Check out our social media too:
Facebook : / highlandcycles
Instagram : / highlandcycles
TikTok: @highlandcycles
Now…. Go Ride Your DIRTBIKES!!!
#gospeloftwowheels #dirtbikes #highlandcycles
Please support our sponsors
www.tbtracing.com/
xcgear.com/mako-360/
www.2strokeheads.com/
nitromousse.com/
www.systemtechracing.com/
ddcracing.net/
enduroeng.com/
bulletproofdesigns.com/
www.evanscoolant.com/vehicle-...
www.wlfenduro.com/
extreme-parts.com/
veemototires.com/

Пікірлер: 150

@richardhartley1705 Жыл бұрын

Your dedication in giving us dirt bikers all this tech info is awesome thank you👍

@XploreEnduro Жыл бұрын

I’m just really happy to see someone running their starter button the left side! No wonder you been pulling holeshots 💪🏼

@highlandcycles Жыл бұрын

Damn straight

@TwoStrokePerformance Жыл бұрын

Great video! This is really interesting because it may answer a big question I had about the ecu mapping. We are working on this new ecu full time at the moment and have uncovered some really interesting differences compared to the previous ecu. This ‘secret mapping’ may actually be the answer to a big question I had about this new ecu from looking at the data. I’ll test this on our 23 125SX tomorrow and report back. We’ll have updated mapping for the 125/250/300 bikes in the next 1-2 months. Keep up the great work 👍

@highlandcycles Жыл бұрын

Awesome man! We are installing two of your re location kits next week! Love your stuff.

@TwoStrokePerformance Жыл бұрын

@@highlandcycles thanks! let us know if you need any help with the IRK or have any questions. So I tested the secret mapping on our 2023 KTM125SX today... just posted a video about it. Results were inconclusive but i still reckon there's some merit to the idea and ill keep digging for more answers.

@highlandcycles Жыл бұрын

@@TwoStrokePerformance right on. Watched the video. Good info. We need to have you onto our live show (via the internet of course) and have you talk about what you do.

@truenorthmotos9965 Жыл бұрын

Nice video. We will have dyno runs soon from my buddy JD. I’m going to talk to him and get him to try this and see what it does.

@highlandcycles Жыл бұрын

Awesome. That will be the only way to really tell.

@thedirtbikingyeti1353 Жыл бұрын

What's your friend's KZfaq name. I am very interested in seeing that

@joelcowdreyiii6745 Жыл бұрын

Sweet - the double blind scientific method, complete with control group and placebo! Enjoyed it - thanks for the video.

@highlandcycles Жыл бұрын

You bet. Hahaha

@easterntownshipsenduro Жыл бұрын

I heard the difference between the setting, love the 2 strokes sound, melody to my ears. The "red" map sounded like a carb 2 strokes. Great video as always!

@highlandcycles Жыл бұрын

Thanks n

@richardhartley1705 Жыл бұрын

Very interesting experiment loving these

@scatta2671 Жыл бұрын

Nice video! Could you do some more videos also while you ride the bike on the track? Would be awesome!

@1176hambone Жыл бұрын

There's something to this. Likely using midi machine code to set digital dial of settings...power valve settings and ignition map in tandem...

@1176hambone Жыл бұрын

This is Gold!

@stevevanderhoek1304 Жыл бұрын

Man your videos are just so good! Just got my 23 tx 300 and pumped to follow along with your tips on these. Did you fiddle with your red idle screw at all? Mine is definetly quite low

@highlandcycles Жыл бұрын

Yep. Had to turn it up some

@stevevanderhoek1304 Жыл бұрын

@@highlandcycles cheers..ill fiddle away

@markturi5055 Жыл бұрын

Love it Morgan. Makes sense Ktm would offer some form of adjustability like green, yellow, red spring and mechanical adjuster of old. Now when is the EFI software adjustment coming out??

@highlandcycles Жыл бұрын

I know. Can’t wait

@donpizzo8963 Жыл бұрын

Hats off to Highland Cycles!👍

@highlandcycles Жыл бұрын

Thanks n

@georgecarmel6114 Жыл бұрын

Nice! Very informative. Thinking of getting the 125 sx, this mapping trick will be good to have. Still happy with my 21 150 sx. Hopefully KTM will sell a150 kit. Also, when changing the map settings, do you think running a 20 - 30 minute ride and check the spark plug color to see if it richens it up more or less?

@highlandcycles Жыл бұрын

That’s a good idea

@utahenduro9002 Жыл бұрын

When you turned the bike off, you left it in the white map which is why the green light never came on when you tried it in the hot secret mode, and also why the white mode felt better after you adjusted it

@ChrisBurns1119 Жыл бұрын

I can’t wait for the build on that 22 xcw!!! How long do you think!? I need info and knowledge lol. Thank you for the great videos man!!

@highlandcycles Жыл бұрын

Hoping next week

@boulangerthierry4193 Жыл бұрын

Hi Morgan from the noise and the video, it seems the power comes quicker with the white map vs the green one, anyway hard to say without sitting on the bike, did you feel a difference with the torque from one map against the other? All the best and continue with your awesome videos😅

@highlandcycles Жыл бұрын

I think I did but it’s hard to tell. I think that in the “red spring” setting, the white map is more like the green map in normal setting.

@Tsxtasy1 Жыл бұрын

I just bought one and am curious if you can set the white map to Low and set the green map to High. It is completely electronic after all

@donproper3632 Жыл бұрын

Can't wait till you try out that wonton hungdong carburetor that looks like a smart carb I can't wait to see what you say about it?

@highlandcycles Жыл бұрын

Me too.

@ALDA2479 Жыл бұрын

I did hear something on this but after spending 12K on the new bike I was scared to try it especially after hitting the button while it was running and ending up back at stealership to get it running again plus wasn't so sure on the info I got other bikes that are efi and all them changes are made threw the ecu rather that be unlocking one or going with a aftermarket unit so I just thought bullshit on that but would be cool same on my bike the green screams high rpm just pulls and pulls my white map feels really flat I would call it and ya I got same bike u got and 3rd and 4th pulls the front wheel fairly easy when ur really in it

@Mostviews111 Жыл бұрын

It's re learning the power valve in relation to throttle position

@evandre02 5 ай бұрын

Great videos man I love them. Quick question. Can you do the same on a 2024 to TE300n Husqvarna. And what battery are you running?

@highlandcycles 5 ай бұрын

You can but I don’t think it really makes much difference in reality

@Dtay630 Жыл бұрын

I noticed when you uploaded the wide open map you had the bike in the white map when doing it, I wonder if you are uploading a faster map just to the white map. Like I wonder if your only uploading it to what ever map you are currently in. I wonder if you had the bike in the green map when doing the wide open map it would make a difference?? Idk

@highlandcycles Жыл бұрын

Good question. Lot to figure out.

@200xcBruce Жыл бұрын

Very interesting. I think had someone else made the change, then you rode it not knowing what was changed you would have had a less biased opinion. I can see if green is too brutal and white is too tame I guess the wide open setting you did in white would satisfy a guy.

@highlandcycles Жыл бұрын

Yeah. Not a very scientific test for sure.

@Ireland_2013 7 ай бұрын

I did notice when you did the middle setting you let the throttle go back to closed before you unplugged the dongle and the power valve cycled, obviously you couldn’t do that on the closet throttle part, but you didn’t do that on the open throttle setting??, could that have been the problem?

@highlandcycles 7 ай бұрын

I don’t know but we have found out that this doesn’t really do anything

@andrecontois8510 Жыл бұрын

No mention of the purple power band???

@jonathanchiasson931 Жыл бұрын

I don't have a 23 2T but I have a 23 350xcf. Been watching your videos with interest. A thought. Doing mid throttle and rolling forward recalibrate the power valve. However remap wouldn't require that as min an max power valve opening settings are done. If you plug in the dongle with throttle at 50% only does the power valve move?

@highlandcycles Жыл бұрын

No it doesn’t. It doesn’t do anything until you roll it closed. At least as far as I can tell.

@jonathanchiasson931 Жыл бұрын

So my thought would be rolling preforms pv calibration and just hold one of the 3 positions sets a map. We can hope for that to be the case.

@highlandcycles Жыл бұрын

@@jonathanchiasson931 that’s what I think also.

@philipcaudill626 Жыл бұрын

@@highlandcycles This would be greatly appreciated chart for all those interested ! Any graphic designers out there ?

@jaimesaavedra9881 Жыл бұрын

Just wonder if can I do that on my 2020 xc 300 TPI. I move from Maryland creeks to the Rocky Virginia

@highlandcycles Жыл бұрын

I don’t think so and I’m not sure it works

@teppokauppinen1885 Жыл бұрын

Full open, connect wait, close throttle wait and unplug. Doesnt gopro have acceleration sensor if you using littpro app or something.

@highlandcycles Жыл бұрын

They do but that would still not be super accurate. The guys at TSP are digging deeper in. There is some merit to this but their initial dyno runs aren’t conclusive either way. Check out their vid. They are super smart! TwoStrokePerformance

@609enduro Жыл бұрын

Could do like I did on my 3fiddy. Made things much simpler.... unplug it and put it in the drawer until you sell it hahah

@highlandcycles Жыл бұрын

Hahaha

@richardhartley1705 Жыл бұрын

Been reading about this on a KTM forum site but you can’t always trust some of the info from these sites👍

@highlandcycles Жыл бұрын

Yep

@ronrobinson5235 Жыл бұрын

You mentioned you put a different battery in. What did you put in?

@highlandcycles Жыл бұрын

Antigravity AG 801

@Hawaiikinrtings3476 Жыл бұрын

@highland cycles I recently js got my 23 300 xc, how long did it take to break in yours?

@highlandcycles Жыл бұрын

30 seconds. Kidding but I don’t do a big break in procedure. I ride them hard right away. I want to break it early if I’m going to break it. That way it’s still under warranty.

@lanceseward2239 Жыл бұрын

Crazy, you think this easter egg would work on the 22's XC - XCW? Or is the dongle just used to prime the oil pump on those?

@byronsawers6023 Жыл бұрын

Same thought as dealer mentioned for performance and manual only indicates oil pump primer ?

@highlandcycles Жыл бұрын

The TPI dongle is just for oil pump. The only reason this is a thing on the new ones is that they have an electronic power valve.

@markreiber4457 Жыл бұрын

Is it always necessary to change the oil filter every time you change oil ,I'm sure it's best too but ,,,

@highlandcycles Жыл бұрын

Not necessary but a good idea

@Norcal2stroke Жыл бұрын

For the full throttle setting I think you need to go back to zero throttle like you did the first time and hear the beeps?? Just guessing 🤣

@highlandcycles Жыл бұрын

It doesn’t do the beeps. I tried it. It only does that when you do the 1/2 throttle one. But that is for setting the PV. The changing maps wouldn’t necessarily need to make those sounds.

@hyslopboys9600 Жыл бұрын

Did it change anything on the guys 125?

@Jlow67WV Жыл бұрын

He overall'ed a woods race on the east coast recently, on a 125 or a 150. And he's upper 40's/early 50's.

@lewisg6987 Жыл бұрын

Need to do it along side a Dyno brother to actually see

@highlandcycles Жыл бұрын

I know

@MechShark Жыл бұрын

Do TBIs have a warm up like TPI or can you just ride it?

@highlandcycles Жыл бұрын

Pretty much just ride it. Warm up like a normal carb bike

@human1513 Жыл бұрын

TPI's only require a few seconds before you start riding them. Do not touch the throttle to start or omce it is started. No full throttle, super hill climbs in sand until it warms up a bit like any carb bike. I have a 2022 KTM 300 XC TPI and KTM, the big dealership service department & their racers, plus Jeff Slaven all told me the sane thing. Basically, get on it, stsrt it, put on your goggles and start riding.

@jeremymullen5378 Жыл бұрын

🔥seems to me all that is doing I’s recalibrating tps sensor, open limits and close limits🔥👊🔥⚙️🏍🔨

@stevenmcallister2230 Жыл бұрын

Hi can I put front light and back light on my ktm sxf kick star 2011 do I need wire harnes for it

@highlandcycles Жыл бұрын

I think you can on that bike. You will need a harness for sure

@stevenmcallister2230 Жыл бұрын

@@highlandcycles cheers you were correct about my ktm sxf bogging needed new pump for inside tank thanks a lot so helpful to me 🫵🏻👌

@highlandcycles Жыл бұрын

@@stevenmcallister2230 heck yeah!!

@Fixxzer Жыл бұрын

I hadn’t heard about the different map settings. So, it will be interesting to learn more. Also, have you heard anything else on the start button error code?

@highlandcycles Жыл бұрын

Still no update on the 5 blink error code unfortunately.

@wfo_racer Жыл бұрын

My update is I put a piece of black tape over the FI light

@CyclevilleBMX Жыл бұрын

Where do you get that plug?

@highlandcycles Жыл бұрын

Comes with the bike

@LORDJESUSATV Жыл бұрын

Have you heard about the Pistons exploding due to poor piston material? Seen a few videos about that

@highlandcycles Жыл бұрын

I have. So far I think it’s been the W models

@human1513 Жыл бұрын

I have seen some videos and they are all the 2023 TPI EXC in Europe (XC-W model equivalent in N. America). They are TPI, Not TBI bikes. KTM changed cylinder manufacturers for the 2023 TPI motors. And the piston is grenading at around 65 hours.

@highlandcycles Жыл бұрын

@@human1513 ugh

@Seager_68 Жыл бұрын

New maps are out!!

@pal-sb7ej Жыл бұрын

Do you ever use after market ECU's?

@themotocrossmodchannelWulfMX Жыл бұрын

There are currently no aftermarket ECU's for the 23' SX models, I called Vortex and they said they would not be making any anytime soon, GET is making one now. I have a vortex on my Rockstar 450 and it is a game changer. I currently have a 23' 125sx that I am posting videos on my channel. Follow me!

@highlandcycles Жыл бұрын

I personally don’t. But this is the first FI bike I’ve had

@tb1951 Жыл бұрын

Any idea why you rarely see suzuki's in your shop?

@highlandcycles Жыл бұрын

Just very few around here. The dealership doesn’t sell many

@ronhartle3268 Жыл бұрын

Wouldn't you have to plug it in when full throttle then turn back to nothing before unplugging?

@highlandcycles Жыл бұрын

I don’t think so. But I tried that too. Same result. I think it’s different but not a “game changer” lol

@330Enduro Жыл бұрын

Maybe try full throttle then roll it closed

@cazsimon914 Жыл бұрын

What are the tool storage holder under the seat?

@highlandcycles Жыл бұрын

What do you mean l?

@cazsimon914 Жыл бұрын

There are spaces under the seat toward the back that look like tools will snap in?

@highlandcycles Жыл бұрын

@@cazsimon914 Oh, yeah, that is just venting for the air box. Nothing goes there. You could probably build something that would. Might be a cool idea.

@kelceyk8199 Жыл бұрын

That's cool, I'm going to try this with my 300 SX. I wonder how many features are dormant on the new TBI bikes that KTM is planning on releasing? When are they going to release the app?

@highlandcycles Жыл бұрын

I don’t know. Really hoping the app and wifi module will come out soon

@kelceyk8199 Жыл бұрын

@highlandcycles I can see the spot for the module inside the airbox and the harness is there. Just patiently waiting

@highlandcycles Жыл бұрын

@@kelceyk8199 yep

@themotocrossmodchannelWulfMX Жыл бұрын

@@highlandcycles I have a 23' 125sx that Im diving into the last week or so, doing some mods and exploring the tech inside, videos on my channel! Follow me I follow you! ps- the PV half throttle dongle connector is to be used after you disassemble the pv for service so the start and end points are set. It offers no performance advantage, its just a service thing. The only way to determine if the full throttle red/yellow/green spring comparable makes any difference is on a dyno, I going to dyno mine next week to see whats up with it being stock, modded, pipeset, reeds, etc...thx!

@highlandcycles Жыл бұрын

@@themotocrossmodchannelWulfMX awesome. I know, I need a dyno close to me.

@grutzmac Жыл бұрын

Doing it wrong. It’s: up, up, down, down, left, right, left, right, B, A and Start

@ThatPlatedLife Жыл бұрын

Select/ Start

@grutzmac Жыл бұрын

@@ThatPlatedLife you right!!!! CONTRA

@lewisg6987 Жыл бұрын

That’s a pure cheap 😂

@donrohde101 Жыл бұрын

Did your factory battery go bad already or did you change it for an aftermarket?

@highlandcycles Жыл бұрын

Factory bath was still good but I swapped for a higher CCA one

@donrohde101 Жыл бұрын

@@highlandcycles which one did you end up putting in it I was thinking about upgrading it normally I use sharai but I heard the new slot for the batteries is pretty slim

@highlandcycles Жыл бұрын

@@donrohde101 I put an anti gravity AG-801. Had to modify the tray for it to fit.

@donrohde101 Жыл бұрын

@@highlandcycles oh wow yeah I just looked at that tree there's not a whole lot of wiggle room in there what did you end up having to do did you make a video?

@highlandcycles Жыл бұрын

@@donrohde101 kzfaq.info/get/bejne/ZpZ8g7WHupm0gmg.html

@user-ny4kl6rp3r 11 күн бұрын

Has anyone figured this out yet?

@jvincent1960 Жыл бұрын

I wonder if the same “secret mapping” exists on the TPI models…

@highlandcycles Жыл бұрын

I doubt it. This has more to do with the electronic PV

@human1513 Жыл бұрын

On the TPI's you can manually adjust the power valve via the yellow square head screw. You can also buy tue green and red springs to try and adjust. The springs from a dealer are about $1 per spring.

@ALDA2479 Жыл бұрын

Thing about the butt dyno is unless it's major ur mind starts playing tricks and having u 2nd guess it all I hate it happens every time I do something to my machines I either feel something or hear something drives me insane honestly 🤘

@highlandcycles Жыл бұрын

Totally. I need a dyno

@ALDA2479 Жыл бұрын

@@highlandcycles How much even is a decent bike dyno these days sure little cheaper for u having a shop and hookups

@highlandcycles Жыл бұрын

@@ALDA2479 big money still. And not really useful day to day in my shop

@ALDA2479 Жыл бұрын

@@highlandcycles Right probably make more sense if u did more street bike type of work

@highlandcycles Жыл бұрын

@@ALDA2479 yeah. Or serious ECU tuning.

@ferretkid1 Жыл бұрын

You and jeff need to ride together lol!

@highlandcycles Жыл бұрын

Hahaha

@petermoss4824 Жыл бұрын

sounds like that 'dongle' is replicating the 3 different power valve springs as previous .... i said DONGLE ..... hahaha

@highlandcycles Жыл бұрын

Hehehe dongle

@MotoFamMayhem Жыл бұрын

I don't think it's changing anything.... When I get my hands on one of the 23 XC's I'll try it out myself ✊️😁

@highlandcycles Жыл бұрын

It’s hard to tell by seat of pants. Need a dyno

@robinhenley7834 Жыл бұрын

Are we supposed to get the dongle with the purchase of the bike? I did not!

@Fixxzer Жыл бұрын

Yes. I received a small packet with the dongle, a couple of spare bolts, some fuel filters, and a couple of other small things.

@highlandcycles Жыл бұрын

Yeah, Robin you should have received it.

@chrisnelson380exc Жыл бұрын

Jeff Slavens say you need to send lots of money to his shop in Colorado Springs!!!! No smiling! No laughing! No singing!!!! No joy permitted! Keep smiling!!!!!

@highlandcycles Жыл бұрын

@@chrisnelson380exc 🤣😂