2023 Ultimate Guide to Tiny Whoops: Are you using the right stuff?
Рет қаралды 87,362
Күн бұрынGet the best Tiny Whoop gear at: www.fpvknowitall.com/fpv-shop...
Ciotti's channel is: / ciottifpv
---
00:00:00 - Who knows the BEST Tiny Whoop gear?
00:01:05 - Best all-round BnF: Mobula6
00:01:51 - Why VERY high kv motors are so important
00:04:07 - Throttle expo is key to taming high-kv motors
00:05:10 - ExpressLRS is THE control link for Whoops
00:05:34 - Is 200 mW vTX weak for a Whoop?
00:06:45 - Best BnF for absolute beginner? NBD Acrobee
00:09:24 - Best digital Whoop: HDZero Mobula
00:11:53 - For bigger spaces and outdoors: Mobula7
00:13:15 - If you MUST use DJI: iFlight Alhpa85
00:14:50 - Ciotti's Signature Freestyle Build
00:15:57 - Why does a "custom build" start with a BnF Whoop?
00:17:05 - Upgraded frame: Meteor65
00:17:19 - Upgraded antenna: TrueRC Singularity
00:18:16 - ALWAYS upgrade battery to BT2.0
00:19:07 - Square-Cell batteries are best
00:21:06 - Props: Gemfan 1210-2
00:23:12 - Motors: Tiny Whoop Red Rocket
00:24:32 - Ciotti's Full-tilt Racing Build
00:26:23 - Racing motors are lower kv and tri-blade prop
00:26:42 - Why use a discrete video transmitter?
00:27:32 - SMOL antenna for ultimate light weight but fragile
00:28:18 - Which camera for racing?
00:28:57 - Ciotti's Signature 75mm build
00:29:10 - Why 1002 motors for 75mm (and why not?)
00:30:44 - Batteries: 450 mAh square-cell
00:31:46 - Which would he recommend: 1002 w/ tri-blade or 0802 w/ bi-blade
00:33:32 - Did we get it right?
@ericbrogren6358 Жыл бұрын
Such a great video to get Ciotti’s knowledge expertise in a consolidated video instead of sifting through hours and hours of lives streams. I hope he does more of these.
@janswff Жыл бұрын
True, i would like to have it compact. I dont watch ciotti because of the long livestream, even if i want to watch them
@sunsetpark_fpv Жыл бұрын
Hey guys - I was totally in your camp until about 4 months ago. I loved Ciotti's streams, BUT, they were so long.... Please, hear my advice. #1 - once you are familiar with his format, you will know when you can skip certain parts of the video, such as, he ALWAYS explains certain things to his audience (like how to make your comments highlighted in the chat for specific users to see). This saves time. #2 - if you watch the video AFTER it has live streamed - oftentimes there is a user (A GODSEND, REALLY) that takes the time to upload timestamps for Ciotti's vid's, so you can skip to specific portions of the video without having to watch parts that maybe don't pertain to your specific needs. This also saves time. #3 - Ciotti really understands Tinywhoops from PID tunes to motors, hardware, weight, etc and he openly shares this knowledge while he is working at his bench on a quad, and usually live streams himself flying the quad that he worked on, while pointing out all sorts of stuff regarding the build. #4 - The users in the chat during his streams are very tuned in and helpful as well. #5 - I almost forgot - and this is a perk - he does giveaways sometimes during his streams. I wish that I started with whoops - and I wish that I watched Ciotti's streams from the beginning. Joshua Bardwell and Ciotti are my 2nd favorite "FPV team up" on KZfaq (First is JB and ItsBlunty LOL). 😎
@ericbrogren6358 Жыл бұрын
Thanks for the tips! I’ll take another look. I like how JB has key Q&A extracted from streams as a new video with appropriate title. More valuable to me to refer back to and thus spend more of my time actually trying to fly! But I gather that’s a lot of work, so I’m considering funding him more. It’s just that I mainly fly micro/whoops so get more out of @NickBurnsFPV presentation style than the live streams from @CiottiFPV and @Infinityloops.
@janswff Жыл бұрын
@@ericbrogren6358 mee too and Joshua with videos like crash recovery are bluejay, this changed more my daily flying
@weBLEEDfpv Жыл бұрын
WB was the 1st US Based company in the USA with “BT2.0” folded, for over 2 years now… 🎉
@sixtofive Жыл бұрын
WB on the cutting edge, bringing us the products we need!
@user-yk1cw8im4h Жыл бұрын
who is WB
@sixtofive Жыл бұрын
@@user-yk1cw8im4h we Bleed fpv
@carbonEYE007 Жыл бұрын
Best batteries I’ve ever tried on my tiny whoops. Hands down
@suborgulag7289 Жыл бұрын
*insert pic of obama putting medal on obama*
@MasterApeFPV Жыл бұрын
Perfect for IGOW! Thank you JB for making a video like this.. I have a lot of whoops, but since IGOW4 preseason I feel like my gear is outdated/ needs upgrades. This video really helps!❤
@fpvcruzer 9 ай бұрын
What a great idea to Interview Ciotti and bring a deeper level of discussion of the thinking behind the list of what to get. Such great information and now I have some new build ideas!
@BikeGuyFPV 4 ай бұрын
Another folded black cell 320mAh in either PH2.0 or BT2.0 is the Dogcom/FYS Crafts batteries. They work just as well if not the same as the Tattu, NBD, WeBleed, and TW folded cell batteries.
@andrebalsa203 9 ай бұрын
Ciotti's MicroWhoop suggestions are great, thanks for having him and his expertise regularly.
@Azim196 Жыл бұрын
I watched Ciotti's drift car video before this one. It is so good! That looks like a blast! Also this video was great. JB, I'd really like to see you get more into whoops so you can make your great tutorials on all of the tiny details I'd never know I was doing wrong.
@kracher7797 Жыл бұрын
The video comes in the right time! I am looking for a tinywhoop right now! Thanks for the review 😅
@aiRxShop Жыл бұрын
Thank you so much for this video. It couldn’t have come at a better time. With my new FPV Drone Shop I’m opening, I’ve been trying to find this info for the last few weeks. Especially regarding Throttle Expo… I was so perplexed how anyone was able to fly whoops or acrobees inside like they do. My elevation was all over the place
@AltmuehlDrone Жыл бұрын
Thanks!! Mostly confirms my ideas on whoops but boy did i hesitate to go into Mobula6 ELRS and boy was i surprised how good it feld despite the 07 motors - good explanation of Ciotti.
@mastershake2782 Жыл бұрын
Watching this while the batteries to my brand new 2S Flywoo Firefly Nano HDZero charge. Thanks so much for the detailed setup video! I wouldn't have been able to do it without that.
@VIFLYDrone Жыл бұрын
Super helpful information for flying TinyWhoop.
@alexblanchard2236 Жыл бұрын
Great video guys. Straight to the point and full of great insight.
@Rang62455 Жыл бұрын
I have an Iflight A85. I love it. I went to a RDQ 4s 850mAh HV and increased the flight time to almost 8 minutes. The added weight has added more stability. This is my second one.
@ProjectMockingbird Жыл бұрын
65mm, GNB 300 (or 250 but you can’t get them) 2s, GNB27, NBD unbreakable frame, goober canopy and Tiny Whoop 19,000 kv 702 motors with HQ tri blades. 22 grams Most fun I’ve had racing and freestyle in forever.
@davidjarzynka4760 11 ай бұрын
I started following CiottiFpv after watching this video
@emmanuelcheveau4891 Жыл бұрын
Micro-king : Nick Burns too !!
@CiottiFPV Жыл бұрын
Nick is amazing, unfortunately he wasn't knighted the true King by Stingers Swarm like I was ;)
@Shauny_D Жыл бұрын
The common factor for all us IGOW and Racegow pilots is the betafpv metor frame, high kv 0702, and one of the folded cell flavors in bt2.0. I made it through 100% of racegow on 1 build. About 17weeks on that build of igow too. It's looking like a lot are moving towards the 35mm pro frames now too.
@josephmuise5604 Жыл бұрын
Am I the only one who like the videos on the way in? Never disappointed
@themicrodriftpozzie9925 3 ай бұрын
This is the video I needed to see I’m coming from rc drift and was looking at kits vs building
@CiottiFPV Ай бұрын
Have you seen my rc drift car chasing stuff on my Instagram? If not you're gonna lose your mind :)
@brynearson Жыл бұрын
I was literally just sitting here wondering this exact question!! That's crazy!!
@KOrnhOliO1 Жыл бұрын
Super well done video guys! 😎🤘
@hockeyrounds Жыл бұрын
I took the plunge and picked up a mobula6, meteor6 frames, and some props for the 25000kv motors. Oh yeah
@iFLYXWings6589 Жыл бұрын
Thank you JB for this video, just the right time for IGOW LOL
@jay999tv 2 күн бұрын
Im from Asia so I got the modula 6 as my first fpv and that SE0702-KV26000 motor Ive seen it at one of the drone shop selling it.
@HerukaSan Жыл бұрын
Thank you. That was helpful.
@JPREEDY77 Ай бұрын
I'm on my first tinywhoop. Tinyhawk III Plus analog. Yes ANALOG. @Joshua Bardwell you need to review the higher TVL cameras available now. I'm impressed, not that I've considered digi, but I have and honestly i dont feel the point. I can tell you, for at least myself. ANALOG IS NOT DEAD, NOR IS PUNK!
@lemonsquareFPV Жыл бұрын
My 31mm is 0702 KV32k sub 18 grams and I love it… BUT a 65mm 35mm prop build is the ideal for many peoples freestyle builds, I also absolutely love it for freestyle (0802 KV27k tri-blades or go higher if you like bi-blades) The 75mm pro with 45mm props is my new found fun, 1002 motors or 1102 or whatever sub 3 gram motor you like (past 4 grams is too heavy)
@RobertoCamachoNoellySerrano Жыл бұрын
Ciotti and Nick Burns are my go to guys for anything whoop and micro💯💯💯💯🔥🔥🔥🔥👍🏻👍🏻👍🏻👍🏻
@offaxisfpv Жыл бұрын
great content. thankyou!
@tekeraq Жыл бұрын
Amazing video, this is years of concentrated knowledge
@carbonEYE007 Жыл бұрын
Superb video guys perfect timing too, just doing a fractal 75
@KOrnhOliO1 Жыл бұрын
Awesome frame!
@kizerme Жыл бұрын
Would love a video on how to setup tiny whoop throttle expo
@CiottiFPV Жыл бұрын
I've gone over it a few times on my streams, come on by and ask me in the chat so I can walk you through it :)
@kizerme Жыл бұрын
@@CiottiFPV That is really generous! I will do that and I have already subscribed to your channel!
@misfit333fpv6 Жыл бұрын
I'm just tinkering with a mob6 right now and the VTX antenna is just lil wire soldered on the board.. no plug for the truerc antenna.. bust out the wire stripper and the solder folks!😉
@funeralatpizzahut Жыл бұрын
great video!
@justplanefred 8 ай бұрын
This is awesome, especially considering it’s going to start cooling off at least in the northern parts of the country… I plan to start flying more indoor for the winter in a warehouse I have access to especially my FPV.
@kd8gby Жыл бұрын
I just started in Velocidrone this week. I'm pretty limited on locations to fly so I'll be going into tiny whoops as my first physical drone. This video was super helpful to understanding part selection. Thank you!
@pgabrieli Жыл бұрын
I LOVE these kinds of videos! thank you very much! will you do something similar for the toothpick class? I'd love that too... tinywhoops and toothpicks are the types I fly the most, so it would be fantastic. thanks again!
@CiottiFPV Жыл бұрын
I stopped flying (mainly from burnout) toothpicks 5ish years ago and I don't know of anyone that is super gung ho about them any more who would have enough knowledge/testing to do a super in depth video like this. We do have a Toothpick page on Joshua's site with some great info I've sourced from my community but I wouldn't really be able to expand much on what's already written over there.
@pgabrieli Жыл бұрын
@@CiottiFPV understood, thanks!
@user-my2me3db1n 11 ай бұрын
Happy model support has been pretty good in my experience.
@ericbrogren6358 Жыл бұрын
Thanks!
@BogHopperFPV Жыл бұрын
Great video
@volodymyrananyev5988 Жыл бұрын
In terms of the props, I am personally used HQprop 40mm 4 blades, which after a crush transform into the bi blade and can be reused. During micro time props was the most disposable item, and double usage for me was a good deal, combined with the performance and less vibration, due to the quality.
@darksheepvids Жыл бұрын
Thanks for the video helped me understand a lot , just getting into whoops had to get new googles , radio and charger lol but having so much fun. Could you please show an example of the throttle expo , would like to see it to get and idea of what it looks like.
@ChainsawFPV Жыл бұрын
Meteor 65 frame, Happymodel F4-ELRS, TinyWhoop Pinch cam, 0802 26,000kv motors, tri blades. My perfect indoor whoop.
@markjwoodford1931 3 күн бұрын
I guess my beecore f3 is like outdated , looking to refresh my 'china' whoops
@ChainsawFPV 3 күн бұрын
@@markjwoodford1931 Unfortunatley, F3 chips no longer work with the software used now.
@solongbattlestar Жыл бұрын
Us northern bad weather people love whoops. Right now my favorite is the Fractal75 with HDZero on 0802 25Kkv on 1s 450 XT30. Difficult build but worth it.
@PaulieShortcuts Жыл бұрын
After playing with meteor65, blowing up a 2s flywoo baby, I’m sold on the mobula and eventually hdzero.
@RimmyTimfpv Жыл бұрын
The Collective Represent!!
@codymanning561 Жыл бұрын
I went with Fractal65 Igow 2600kv motors cross Elrs FC tri props because I have them and forgot to order bi blades nano32 vtx because I had it, and it is awesome and foxer pico cam and you have to run webleed batteries.
@Shauny_D Жыл бұрын
My tinywhoop cells pretty much always hit 2.9v one every flight. You just don't notice any sag so you don't slow down. BUT even with 100''''s of flights bashing the mess out of them they still perform. Most have a crazy bend to them from bashing on the ground but they are still rocking.
@AaronBrand Жыл бұрын
As a total noob who was waiting for his HDZero goggles to ship, I opted for the beta fpv meteor 75 just because it was sold with the batteries and charger. Easy. Then I ended up getting emax goggles because I couldn’t wait any longer to fly. I’ve broken three frames, although I’ve resurrected one with a little tape. I some how lucked out; I have a bunch of the stuff you are recommending. Beta fpv batteries (450 mah bt2.0). I guess I will upgrade my motors. It came with 18000kv motors and I’ve already ordered a backup set. I’m having so much fun with it that my 5 inch build is on hold. And I still haven’t used my HDZero goggles.
@Adam_FPV_ Жыл бұрын
720mah HV Gaoneng battery for up to 5 mins flight time. I also converted my Mobula6 HDZero to 75mm frame. Still running stock motors with 1mm shaft and never bent one but i'm constantly replacing frame and canopy from very hard crashes.
@janswff Жыл бұрын
Try the new Betafpv 75mm Frame or the Fractal its more robust
@Adam_FPV_ Жыл бұрын
@@janswff will check them out. Looks good
@andrewdecavia7553 11 ай бұрын
For the 75mm build, do you not run into frame issues on Mob7 like Mob6? Was considering building an outdoor rig to go with the Mob6’s we’re waiting on. Wondering if I should order Meteor75 frame to upgrade if it breaks.
@DivisionRc Жыл бұрын
both my mob7 and mobeetle have 400mw vtxs do you plan on covering the enw mobula 8? I really hope they release a walksnail one, only analog rn
@BadRavenFPV Жыл бұрын
Great Video! I have recently transferred a Mob6 HDZero/ELRS into a Meteor 75 on HQ Bi-Blades. (Which BTW can be done with NO disconnection to the soldered connections!) IMO it flies significantly better than the Moblite7 HDZero/ELRS. I note the comment on max 350mAh cells being available for 65s. I have GNB 380mAh for 65 frames and use GNB 650mAh for the 75 frames. I have no confirmation these cells are actually the capacity stated, but their run time is telling me they are not far off if at all. I have tested these against 300 (for 65) and 450 (for 75) and cannot feel any adverse effect of the small weight increase. (for hacking around and basic freestyle, not racing). Some real data on a wider range of cell size against flight time would be good!
@CiottiFPV Жыл бұрын
The folded cell 300's perform sooooo much better than the 320/350/380's and come with BT2.0 which realistically makes them the only option worth running
@CastlesForEyes Ай бұрын
Tinywhoop? Tell me more Beautiful video. You weren't lying with the Cinematic title
@Chris-yx5wg 6 ай бұрын
I just bought a tinywhoop and having a blast! My only issue is the flight times ... 2-3 min goes by too fast I feel like I'm just switching batteries the whole time... I bought the 19kv version and for me its got plenty of power for indoors. I'm a newb so we will have to see as I progress.
@mxracingunlimitedltd7784 Жыл бұрын
I thought the Mobula 65mm & 75mm in the Brushless version's at least, can do 1S-2S now on the newest version?
@timn4481 7 ай бұрын
i have both. acrobee absolutely. i had all kind of issues and never really resolved them, with the mob6. it never flew right..tried everything..flashing etc etc..
@UnmannedSky 9 ай бұрын
Lumenier has a 20mm antenna too (AXII2 micro). Seems comparable to the trueRC ultra short. I'm curious if Ciotti has any feedback on those for a Mob6?
@florijankocbek1122 Жыл бұрын
Hi, just bought the Whoop yesterday😅 lets see if i got it right💪🏻
@jmollick1 Жыл бұрын
Got a TinyHawk II a few years back (i think it was a few years anyway) and got the BetaFPV controller to go with it..... really didnt mess with it much (had nothing but issues updating and binding). Im a newb and i suck at flying LOL. Recently decided to give it another go...... got a simulator and a HolyStone HS210. And what do you know, a few days on the sim and practice with the HS210 and i can fly without crashing every 5 seconds. Have since up graded..... got the Mobula6 based on you and Nick Burns reviews, paired it with the RadioMaster Zorro 4IN1 (so i can fly my planes, my Mobula, my TinyHawk, and the BabyApe pro V2 i just got) I have to say the Mobula6 and the Zorro are an AMAZING pair! By far my favorite setup so far..... cant wait to work my skills up to fly my BabyApe If youre looking for a darn good performing whoop to get you started.......... GET THE MOBULA6!!!!!!!!!!!!!!! Pair it with the Zorro, and for around $200 you have an amazing combo! Goggles.... well thats a story for another time lol
@brandon9689 2 ай бұрын
I love the HS 210/420. They were a huge help with improving my skills on regular camera drones. The spare parts and batteries are only available from the Chinese warehouse, and they are ridiculously priced. They want like $12 per motor and $17 per battery for a toy. I had a ton of fun with it until I blew a motor though, it helped my skills substantially.
@juliomagana3112 Жыл бұрын
I have the meteor75 and it’s great I prefer the bt2.0 battery
@pixelshot09 11 ай бұрын
Hey nice video !!! Where Can I get a nice tune/pid for a mobula6 + redrocket motors 30k kv ? Thanks !
@numa3798 10 ай бұрын
I am really getting confused with the batteries here. What batteries should I buy for the Mobula 7 now ? And with bt.20 or ph.20 and somecable adapters ?
@jamesg1460 Жыл бұрын
I've drowned my my old original mob6 in the dogs water bowl 2ce, surprisingly it still works fine lol 😅
@CiottiFPV Жыл бұрын
I don't think I have a Tiny Whoop that hasn't been fully submerged in the sink or cat's water bowl at this point and they all just keep going and going :)
@jacklinsey 3 ай бұрын
What is your recommendation for getting into Micro Whoops when I have DJI Goggles V2? I have done so much research (watching videos, reading all of FPVKNOWITALL, reading forums, etc.) and am still not 100% where to start. As of now I'm looking at the BDI Digital Adapter V2, TBS Fusion, Lumenier AXIl 2 Long Range Diversity Antenna Bundle, and a Meteor65 Pro. I'm not sure if that's the best route or if I should get an HD Whoop (but that would require dedicated Walksnail or HDZERO Goggles which are expensive) or to get straight analog Goggles since the DJI Goggles V2 are at the end of their life cycle and if anything happens then I have nothing (but standalone analog Goggles are also expensive). Any advice?
@stanbekker Жыл бұрын
The timing of this video is great, looking to buy a tiny whoop to practice with (Spent 50 hours in simulators)
@franciscohompler2773 7 ай бұрын
if you have velocidrone take Beebrain drone for the tighest maps (like House, full house tour or apartment maps). most realistic simulation of indoor flying
@stanbekker 7 ай бұрын
@@franciscohompler2773 thanks!! Will do, awesome!
@antonselin8778 Ай бұрын
Thank you for that video, I found it very useful, as I'm gonna buy my first FPV and learn how to fly (indoor, we have restrictions in our country for outdoor flights). I'd want to ask you, what about the Mobeetle6, is it a good choice for the absolute beginners like me? In mobeetle6 I like that it is sold with 2 batteries, spare props, as for me it's a good start kit for not a big money ($110 on Aliexpress). Is mobeetle6 worth buying as a whoop for a newbee? Thanks again!
@pacospete4299 Жыл бұрын
I ask someone recently what their Expert opinion on a newbie start-up set-up and they answered .... I would go hdzero goggles, radiomaster zorro radio and factal 75 drone . Your thoughts ?
@DIYHuman 8 ай бұрын
Can I find a perfect tune for that recommended mobula6 build somewhere?
@MadeInChinaCalv Жыл бұрын
Is the Flywoo firefly 2S nano worth considering for the DJI users?
@SeanLewisMedia 2 ай бұрын
Is there a radio you would recommend to get started with a Whoop? Maybe a budget option? or would it be but be better to get a better radio and be able to adapt to larger quads or planes? I kinda of think I should go budget as I've tried to get into drones a few times but it hasn't stuck, although it was about 8 years ago and Im sure you know it wasn't as easy as it seems to be now to get off the ground. id truly appreciate your thoughts, thanks for all you do here!
@jalkingforjesus Жыл бұрын
Also loving 65mm 2s with 14,000kv 0802s on the "unbreakable" Cockroach frame with 300mah HobbyKing 2S batteries (Nick Burns' favourites). Just cut the plastic pieces joining the two vertical arcs and mount the battery vertically with a rubber band on the hooks. 5:00 min flight times and basically no sag on XT30. Heavy at 25g but with 2S I don't really notice the weight. Credit to Patrick Clark of PMB who gave me the idea with his 0803 build of ages ago.
@ProjectMockingbird Жыл бұрын
You should try Tiny Whoop 19k 702 on your setup. It’s soooo good.
@jalkingforjesus Жыл бұрын
@@ProjectMockingbird this is 19,000kv 0702 on 2S? That sounds nuts/awesome!
@ProjectMockingbird Жыл бұрын
@@jalkingforjesus yup! 17-19k 702 is the sweet spot. 702s are really light, bringing the weight down and you don’t give up power and battery life is still around 3-4 min.
@jalkingforjesus Жыл бұрын
@@ProjectMockingbird will have to give this a go. Do you think the happymodel 0802 19,000kv motors would also work? I have a fair amount of these from previous mobula6 or moblite quads.
@ProjectMockingbird 11 ай бұрын
@@jalkingforjesus anything past 17k on 802 just seems too much and hard to tune well. 703 NBD works well, but 17-19k 702 is just about right
@jalkingforjesus Жыл бұрын
Are the NBD 300mah GNB27 batteries folded cells? I have a couple of packs of these and they are AWFUL. Like I get 1:30 flight times compared to 3:00 on Eachine 250mah GNB27s. They are also way heavier and don't fit the Meteor65 frame. Did I get a couple of dud batches or something?
@danstumbles5058 6 ай бұрын
So is the Mobula 6 still the best now Meteor 65pro is out? or does the 65pro take the cake?
@marcelocirilo6608 Жыл бұрын
Hi, I Write you from Argentina. I want to know what whoop is the best with HDZero. Mobula7 or Moblite7? Kind Regards.
@raymondblanchard2213 11 ай бұрын
What about mobula 6 losing settings when low battery? "Props Off" video. And the one I just flew for 3 test flights yesterday, no crash, just quit working. This happened to a mobula7 also that was a year old video. Since I just got it, I'm ready to return it for a different brand. After watching till the end, do you suggest just re-flashing firmware, or is this just a bad flight controller or what? I got this because of all the rave reviews, I just whish I had chosen ELRS but would still have to get a module for my radio, so decided to get frsky.
@fezfpv 8 ай бұрын
I would like to carry thumbpro v2 with tinywhoop what motor do you recommend?
@mad_caterpillar7725 Жыл бұрын
1002 31mm triblade+bi blade 15500kv 2s here! you can probably get a 802 to work as good but nothing handles as good as a under propped big boi motor
@Aldrizzle 8 ай бұрын
is it still good to use emu mockingbird with the mobula 6?
@tk-maker Жыл бұрын
I do agree PH2.0 is bad over time, the contact surface is small and once it oxidized the performance dorp by alot. I would suggest replace new ph2.0 once you feel your whoop is sluggish, use electronic contact cleaner on PH2.0 battery will help. It is too late to switch to BT2.0 ocnce you have tons of PH2.0 batteries
@oneeyefpv Жыл бұрын
I got a different end-card (ORQAPocalypse). I was looking forward to seeing the tiny whoop drift car chase.
@CiottiFPV Жыл бұрын
It's over on my channel, Joshua will add it once he sees my Facebook message with the link :)
@diemfpv Жыл бұрын
Few days ago i ordered Mobula7 1s for indoor/outdoor - nice to see that i have space for upgrades. Ps. As i know mobula7 stock 20k motors got 1,5mm shafts as well.
@SnakeCakeExotics Жыл бұрын
they do
@CiottiFPV Жыл бұрын
Yup, unfortunately 20,000kv isn't nearly enough though so the best place for them is in the bin :)
@diemfpv Жыл бұрын
@@CiottiFPV finally... you are probably right. For the beginner whooper hopefully might be enough :)
@SnakeCakeExotics Жыл бұрын
@@CiottiFPV is there any way to boost them with idle or anything?
@CiottiFPV Жыл бұрын
@@SnakeCakeExotics unfortunately not
@lomokid Жыл бұрын
I got 6+ minutes of flight with bi-blades 0802 with 660mah on mobula7 outdoor today. I agree that 450 is slightly better overall, less in flight but better control, and 380 isn't worth attention. I am waiting for new tri-blade props and hdzero whoop vtx to try.
@mikerich32 Жыл бұрын
I just did the same thing this week. I just bought some GNB 720 mAh batteries, and they BARELY squeeze into the battery tray of my stock Mobula7 1S. Even with aggressive acro flying I'm getting 6 - 6.5 minutes! And the heavier weight feels fun, it's a nice change up from the 450s I've been using
@lomokid Жыл бұрын
@@mikerich32 7 minutes, wow, that's nice! My original frame was destroyed on day 2 😂, so I bought a new one from Betafpv with the bay perfect for 2s batteries. I have no problem fitting larger batteries, had to put some foam to make the bay extra tight for the battery and try to keep the battery in place when crashing. I don't think mobula7 can do anything aggressive ☺️. It feels so underpowered outdoors. Usually just flying makes motors spin 50-75% so nothing is left for me to drive it fast.
@HuMaNiTaRiAn1 Жыл бұрын
isn't the iFlight A75 the better whoop option for DJI users?
@Izquierdron Жыл бұрын
I've been flying with the Mobula 6 HD since it came out and I think it's incredible to be able to record on an SD card with pretty good quality in something that only weighs 26g, they should get more Tiny like this. A hug with colleagues
@cinghiotop6572 10 ай бұрын
u have to reflesh the firmware if the lipo goes too low...
@georgelai2810 Жыл бұрын
So I have been looking at the fractal engineering 75 RTF. Anyone have any input on how those fly? I have a mobula 7 analog and like it.
@CiottiFPV Жыл бұрын
I have a live stream about the Fractal frames, the only thing they do better than our recommendations here is to not have ducts in view
@JR-cm9sh 11 ай бұрын
which is the best freestyle tinywhoop?
@xWood4000 Жыл бұрын
How do you stack a camera pcb on the Happymodel mobula 7 with the short M1 screws? I haven't easily found any M1 standoffs. I'm not even sure if the frame uses exactly M1 or if it's something between M1 and M2, but it's not M2 because my M2 standoffs don't fit in the frame screw holes
@CiottiFPV Жыл бұрын
Take a look at the BnF's with HD Zero/Walksnail, they use taller rubber grommets on the AIO and then run longer screws, I haven't seen the longer screws available anywhere though but I also haven't specifically looked for them
@balajiprasad9046 Жыл бұрын
Blue jay 48 khz upgrade, fractal 65 conversion?
@BBoyDomaFPV 11 ай бұрын
Which rates do you use?
@adriansurfing4343 Жыл бұрын
for 65mm, wouldn't the meteor65 Pro version, that uses 35mm props(compared to regular 31mm on all other 65mm builds), be the go to option with a matching set of props? was this given consideration?
@marinebymistake Жыл бұрын
Didn't understand why meteor was overlooked too
@CiottiFPV Жыл бұрын
The name of the game with 65mm rigs is reducing weight, we've got a bunch of motors that make plenty of power so there are only really disadvantages with the 35mm props (main ones being no biblade option and they're heavier so worse PID loop performance and flight feel) and then being required to run a cross style AIO you then need to have an external VTX which is both heavier and much more difficult to build.
@CiottiFPV Жыл бұрын
@@marinebymistake See above, nothing's been overlooked but we only recommend the best options so that you have the best flight experience possible
@marinebymistake Жыл бұрын
@@CiottiFPV got it, thank you
@butterflyfpv Жыл бұрын
Good work for Beginners. I think this will definitely help some. It's certainly not complete yet, but I think some things are well covered. Emax 1S 300mah foldet cells? Are you sure?
@CiottiFPV Жыл бұрын
I am sure :)
@butterflyfpv Жыл бұрын
@@CiottiFPV Can you give me a link or a data sheet? So that I don't have to ask emax myself. That would help me a lot! Thanks in advance! My Emax 450mah are not foldet cells I'm pretty sure (they are gray and the seam is not in the middle)
@CiottiFPV Жыл бұрын
@@butterflyfpv I don’t have anything like that, I’m just a random guy on the internet lol
@butterflyfpv Жыл бұрын
@@CiottiFPV So then I ask differently: Is the cell of your EMAX 300mah Lipos black and the seal exactly in the middle? If not, it is most likely not a Z-fold lipo..
@erich7431 Жыл бұрын
Very interesting but I wish you would have also talked about autonomy and the impact related to the various setup discussed in this video. I guess autonomy is one a the major concernes when it comes to tiny whoops
@CiottiFPV Жыл бұрын
I'm not sure how autonomy applies to Tiny Whoops....or FPV in general to be honest
@FPVChillZone 10 ай бұрын
The support of Happymodel is in my experience fantastic. Just had a AIO Flightcontroller from them that a friend burned by reversed polarity. I could identify 2 burned Mosfets myself, but there was a DC Converter on the board that I couldn't identify by it's SMD marking. I eMailed Happymodel with my problem and got within 12 hours a reply with a exact model number, manufacturer and purchase link of that IC. In my experience the support of "good" Chinese companies that are on the market for some years is especially on a tech level often much better than the service from European or US companies that often don't even have a knowledge about the ICs used on their boards. The latter often just want to sell replacement boards, but don't help with identifying single parts or schematics.
@joshmellon390 7 ай бұрын
I'm going to put walksnail on my bubito.
@moesotaku Жыл бұрын
you didnt discuss about AIO flight controller. i have 4 betafpv f4 elrs 1s. 2 of them have broken esc, one has broken gyro and the other have desyn isu. i love if cioti give recomendation on AIO fc
@codymanning561 Жыл бұрын
I am running the Happy models cross Elrs, it is very similar to the beta fpv one. I have only ever had on issue with happy models FC and it was my fault.
@CiottiFPV Жыл бұрын
We have AIO's on the page, those are the ones we recommend, we did sorta skip talking about them but I guess there's really not much to say, the Happymodel F4 ELRS 5A is my absolute favorite for freestyle
@mattalford3932 10 ай бұрын
So I bought a 313 gram GPS drone. Its cool, but then I discovered Whoop fpv drones again. I remember when they first happened, but it wasn't consumer mainstream yet. Now that it is idk what to buy. Cetis, bataflight. I definitely want brushless motors though lol.
@KobtsevRC 11 ай бұрын
What is the best option for apartments with crossfire?
@earry509fpv Жыл бұрын
My question is, if you’re dealing with a “heavier” 1s build, should we look at lower kv or Higher!? I under the impression I want lower for higher torque??
@CiottiFPV Жыл бұрын
Great question, kv has almost nothing to do with torque, torque comes from stator size, kv comes from how many winds of copper are around each stator pole. So, the best way to improve the performance of a fat whoop is to go with the highest kv (for the most rpm and power with no increase in weight) motor that's got the smallest stator possible to save weight, BUT you can't go too small on the stator size because it'll overheat.
@earry509fpv Жыл бұрын
@@CiottiFPV thank you! I’m actually building a Diatone GT R90, as a 1s rig! I’d love to send pics to show you!
Joshua Bardwell
Рет қаралды 122 М.
Joshua Bardwell
Рет қаралды 221 М.
Joshua Bardwell
Рет қаралды 529 М.