2024 Arctic Cat Catalyst 600 “Build Video”
Рет қаралды 16,863
Күн бұрынTen Lakes Motorsports 2024 Arctic Cat Catalyst 600 146 ES build video
SSI lightweight rotating components
@MrHockeyt42 6 ай бұрын
Stoked to see what you make of this thing.
@kevinhall6403 5 ай бұрын
Stoked to see what you can make this thing do this winter!
@technerdy 5 ай бұрын
typically when dealing with such small weights i remind myself I too, could lose 20lbs. lol
@adamhaughey5915 5 ай бұрын
Yeah he’s pretty big for worrying abt bolt weights
@kwmiked 5 ай бұрын
Weird I made it to the clutch removal part and kept saying to myself why waste money on this stuff when he's a big boy. Not being a dick, but cmon. I can see doing all this if u were 180-200lb
@tenlakesfreeriders5800 5 ай бұрын
@@kwmiked😂 you guys need to realize it’s more about doing something interesting to the snowmobile than it is losing weight from it, I can do everything on a 4 stroke Yamaha that I can do on this sled so weight really isn’t an issue.
@tenlakesfreeriders5800 5 ай бұрын
@@kwmikedthe waste of money is debatable though, most of the work is rotating mass loss which is horsepower gained, if there was much option for other power short of big bore or a turbo I would have done that instead but I would have gotten the same comments 😂
@anthonymeyer183 5 ай бұрын
Dud blue lock tight is good red lock tight is for when you never want to take it back apart
@tenlakesfreeriders5800 5 ай бұрын
I’ve gotten to the point where I hardly buy blue anymore, using a small amount or red everything will still come back out, green is where you go seriously wrong
@kwmiked 5 ай бұрын
Id say u should have this clutch rebalanced after add all this light hardware, probably one of the reasons they blow apart when guys change all this stuff and throw it back together. No line up marks to look for on these?
@tenlakesfreeriders5800 5 ай бұрын
True as well, I’m not going to personally because I’m not worried about it, I’ve had them blow apart stock, that’s what poor manufacturing, quality control and heat will do sometimes
@ChristopherBlakeMarsh 4 ай бұрын
What is that clutch compression tool, and where can I find one?
@tenlakesfreeriders5800 4 ай бұрын
It is made by starting line products
@scottdarling229 5 ай бұрын
Where did you put the heat to on the primary clutch to remove the OEM 6 bolts? I couldn't get them out with heat worried I would temper some of the other parts.
@tenlakesfreeriders5800 5 ай бұрын
A little around the spider and a little on the heads of the bolts, they didn’t come out easy at all
@tenlakesfreeriders5800 5 ай бұрын
They were borderline ready to spin out once they broke loose
@scottdarling229 5 ай бұрын
I spun on the first one so didn't bother changing them. I put good heat to it as well so was worried about tempering some other of the casting. Thanks for letting me know.
@Just3adventures 6 ай бұрын
We used to have a 19 alpha that was get hot very easily while trying to get to the deep snow. How is the new machine? It looks like it still doesn’t have a cooler in the tunnel like Polaris or skidoo. Do you see it getting warm easy?
@tenlakesfreeriders5800 6 ай бұрын
So far I haven’t had much of an issue with cooling, about the same as the skidoo I owned last year, as long as you get off the side of the road a little it stays cool
@samthalberg8293 5 ай бұрын
Ya, that’s one of my biggest issues with cat, they need better cooling. No problems when u get to the good snow but on the crappy trails up it can be frustrating if there’s no snow off to the side. And from what I can tell the catalyst heat exchanger on the M is even smaller than the previous model, so I can’t see it being any better. I pulled the short heat exchanger out of my alpha and put in a longer one, big job but it makes a big difference
@kwmiked 5 ай бұрын
Am I missing something here? Lightening up the sled wasting money basically. U could lose 20lb easily and save money on big meals. Not being a dick but cmon. Kinda pointless
@tenlakesfreeriders5800 5 ай бұрын
This is true, but rotating mass is horsepower to the ground however much it might be is irrelevant, the point of this sled was doing small little things to see what a 600 will accomplish, every sled I own is modded to the moon besides this one
Sledaddicz
Рет қаралды 11 М.