Рет қаралды 11,295
I install flare fender on our Can-Am Defender. Without it, the mud gets inside and that is not convenient at all! Especially on my coffee mug!
Need the template and instruction?
www.instructions.brp.com
Then search part #715006001
The template:
brp.secure.force.com/consumer...
0:00 Introduction
0:43 Why Fenders
1:18 The front wheels stick out from the wheel wells
2:50 Dimple location for screws
3:43 Unboxing the parts
4:56 The aluminum lateral protection issue
7:05 Where to cut → the template
8:55 Tracing the cut
10:22 Cutting the rear flare
11:43 Dimple does not match... What to do?
13:30 Using the screw will be painful: using bolts instead
14:38 Unlatch the gas cylinder for better access
15:12 The front fender: missing one dimple?
16:27 Screwing the front flare
17:55 Quick view of the whole process
18:50 End result
This HD10 Mossy-Oak Edition is equipped with lateral aluminum protection, so part of the fenders need to be cut to a specific pattern
Instructions are available online for that installation, so are the templates for it.
Nothing like seeing it in real situation, as opposed to instructions on paper.