Ah shet , take it Ez-killa. And with that rolla too 🔥

This has to be my favorite 22r ever! for real!

Beautifully done. You, sir, are an artist

Love what you do guy's. I have been doing this for 40 years. It's great to see some of the younger generation that still gets into this stuff.

yooooooo this is the first video of yours i've seen and you can most definitely guarantee i'm here to stay!! love the style, so fresh, so clean, and so informative!! thanks brother

I'm sure you know this already but GODAMN that is by very far the cleanest looking 22r install or any motor for that matter that I have ever seen. Bravo sir! 👏👏👏👏

I really envy this guys patience and mechanical ability

those carbs those side draft carbs make such wonderful noises

22 r is a bullet proof MOTOR! In my opinion. Love it! Bring it back! Great gas mileage every thing!

i just got an 82 22r myself and i can't wait to start doing stuff like this

Had a 22R in my first car - 1981 Toyota Celica GT. Loved that car, raced everyone at my HS in that thing!

Sweet job!! Gotta love them old school toys!!🤘🏽🏁🤙🏽🦾

Awesome build my favorite Toyota pickups.

Super nice truck dude. Excellent job. My first truck was a 1994 Yoda with the 22re motor. That was the best truck I ever had.

There is not engine like the 22 R , awesome engine love it

Willing to make a set of headers like that ill buy emm??

I had a 78 celica with a single .45 dcoe headers Isky 269 lift cam 3” pipe to the back no cat, it was a beast!!!!! All this in 81-82.

THIS MAN KNOW WHAT HE IS DOING.

Amazing build 🙌🏼🙌🏼

Very sweet build. I love that little 4banger❤️. I built a 1776 motor for my ‘71VW Bus and drove it 12yrs. It would fly @75-80mph in 4th up to Reno.

I hurd these 22r are so much fun to Drive and just are the balls ! My girls dad always talks about how badass these were in the day !

That truck is awesome sir!!!

Really beautiful work

Keep up the great work!!

Damn that is one clean build! Toyota and Nissan are very popular where I'm from! I can't wait to see the 1/4 mile times on this awesome truck!

Nice job on the truck it's very clean in and out

Looks really good and sounds great 👍🏽 💯

My 81’ longbed with the 22R is in the garage so i can start the rebuild. Going 40 over as well and going to add a turbo. The side draft webbers are badass and sound so good.

You got a nice setup. Props

Great job looks awesome.

Thats a sweet build

That’s clean!

Stunning

Wow nice work. Sick truck.

I'm very impressed.

Sweet ride!

awesome build.

22R with Webber side drafts sound cleannnn

I would love to run those headers in my 82'🔥💯

Wow sweet nice work

I'm going to get a rebuild done on 82 next year, hope it turns out this nice!

I have one of those engines and i keep tuning it and swapping from truck to truck it a 20r 22r hybrid

this thing is sick

Love the video man nice build can't wait to see can't wait to see the dyno numbers. i built a Toyota 20R 22R hybrid 10 years ago for my buddy pulls to 7500 RPM dynoed at 160 horsepower to the rear wheels for Street truck I think that's not too bad I used lc engineering stuff for that build just subscribed can't wait to see more and my buddy still has your a old school tube chassis AE86

*_Inspiring! I wanna start building my Toyota Pickup soon._* Wanna try to max it out on NA power.

I MISS MY 22R, 89 VAN

22R best engine ever built

Awesome 🙌

This thing is amazinggggg wowwww.

man that thing is nice!

Beautiful 😍 take my credit card, do mine next!

Back in 1995 I souped up my 86 Toyota Truck after the mini truck scene in socal was gone. I followed the trend that was catching on with the import scene and the likes. It had a mid cam from trd, 44ph mikunis, headers but forgot the brand. e fan, trd clutch, lockrite locker, had the pully shaved and balanced with no a.c. short shfiter and flytrap. I was really learning at the time and found out my mikuni intake manifold where small and the carbs where right at the head. I didnt have a aftermarket fpr and seems like that set up was for off road driving and lost alot in the 1/4 mile. It took alot of gas and was loud from intake and exahust just to beat oem hondas at the time. I learned about heavy rims too, it had MOMO Mirages from an MKIII Supra. Anyways, when I put the stock carbs and intake back on it was alot quicker especially high end. I ended up selling the truck bone stock with just the bolt ons in 2001. It was my first ride I ever souped up.

Well done, Exelente job!. Arts'of hearts' Jobs. I liked it, and I am appreciated guys!!..

Mini trucks like that is popular where I’m from same set up

This is all I ever wanted for for my old '82 😥

I had Hilux with diesel 2L, on end of its life I swaped 22r. Its a good bullet proof engine.

Very Cool, I have a 1987 22R 4x4 std single cab , I need to find time to work on and restore

Should of put a 20R head on it. Out flows the 22R big time and bump up the compression. Sounds good.😁👍

does it have an air filter or does it just suck up dirt all the time

Thank you for the Awesome detailed content, definitely subscribed 💪💪💪💪💪👍🏽👍🏽👍🏽👍🏽👍🏽🙏🙏🙏🙏

I have a 78 with a 22/20 hybrid. Had stage 5, dual spring w/ titanium retainers, lce forged rods. 22reT pistons, Weber 38. Still need fuel pump. But will be downsizing in cam to a stage 3 With new rockers.. if i dont do the swap first lol and sell thay engine

sick af!

I definitely gonna email you guys about doing my header on 80 model pickup! Awesome quality stuff 😍

3 years later but that's got to be the most awesome Toyota engine I've seen in a while. And the truck itself. I have one the exact year and color. But mine does Not look like that.

Almost thought you was in Hawaii somewhere, nice build.

I miss my 83 and 85

That’s crazy, I never seen a 11 to 1 setup using pump gas. A lot of people claim that there will be pinging issues with that type of compression ratio.

Se love that engine. And we like to swap on my 94,22R e

Durooo 💪🏽💪🏽💪🏽🇵🇷🇵🇷🇵🇷yo tengo una pick up también

Does your header's primaries all share the same length? The sound is so awesome and has a way throatier/rumbly sound vs other aftermarket header options i've heard. Love the build this things really awesome!

Beautiful Work I know the header is Custom but would love a header in my 85 Toyota xtra cab 2wd.

Sweet ride!I have a 1987 mazda b2000 and don’t know which way to go with engine.I thought about a Miata engine swap.I love those Toyota

Really should get that temperature up. If you're on the level and know enough to build a engine like that you should know running an engine to cool can be worse than a little bit hot. All the metals expand with heat and ea different metal even different alloys of the some metal expand at different rates. Not getting up to temp can keep pistons from fully expanding and wobble in the bore. The oil doesn't get hot enough and cannot flow as much volume the list goes on. Maybe I'm wrong I can't claim to be an expert with 4cylinder yoters but the engines I do build and have plenty of experience with don't like being ran at lower temps. Nice looking piece though foresure a one off build

And I’m out here just trynna get mine running after a rebuild🤣🤣

Beautiful build, love the header set up! I’m considering an early 90s Toyota build myself, more along the lines of a nice street strip build. A had 3 Tacoma’s mildly done up as a 20 something year old, just bolt ons and suspension mostly. Im wondering what your thoughts were, would you build up the 22re or swap in a 2 or 3rz? I’d say my aim would be just north of 300hp, with an eventual turbo set up. I’m guessing 3rz would be the way to go, but what are your thoughts on the 22re and that hp level? Thanks!

awesome

The valves are a lil loose. Set them at 7 and 11. It'll be alot quieter

Would LOVE to see you guys build a All Motor TOYOTA engine monster for the 1/4 mile

Did you upgrade the ground straps from cylinder head to body etc?

Nice work. Was wondering about initial timing setting and full advance timing @ rpm. Did you recurve the advance? Thanks

Спасибо большое. Очень понравилось ваше видео. У меня Фольксваген Таро. Тоже охота что-то придумать с ним.

I built a 22r with a Chevy bottom half 22r headers .. craziest build an pricey 😂 awsome ride you got there #86singlecab

Great job , very nice truck, I have the1980 Toyota Corona and it has the 20R engine, I’ve tried to rebuild the engine but I couldn’t find the parts to do that , even the mechanics told me the same thing , I wonder if I can replace it with the 22R engine ?

I have an '83 long bed that I will be digging into this year. You have given me some ideas and I may be reaching out to get more info as I get further into mine. Side note - I thought '82 still had the round headlights, but I see this one has squares. Were they swapped, or am I mistaken? Love the headers BTW.

I have a 83 toyota hilux with the 4 speed manual, and I'm thinking about doing a stage 2 cam and a 38/38 weber. Should I also put dual valve springs and is the 38/38 weber a good carburetor for that kind of setup

Can you help i have a 87 22r pickup running a weber 32 36 with electric choke its dieseling pretty bad during shut off, i have a fuel pressure regulator 2.5psi also the timing i set to 0 degrees, it runs great at idle and doesnt stall at stop lights just dieseling when turned off any advice thx

I got a 85 that I was thinking of building

would it be possible to post a link of what you did like items you replaced and where you bought all the items please and thank you

are you guys the same PSI that built a sick RWD 3SGTE AE86 a long time ago, white, yellow, orange, red?

That sound tho

Any updates on that distributor advance lockout video? Thanks!

Hey nice build, what did you use to plug those heater hoses?

Video on how to weld the vacuum advance?

i own an 86 rwd i was hoping to learn how to wrench on this vehicle any websites to purchase parts youd recommend or places that have good guides. any tips are appreciated thanks cool video beautiful work im inspired

Nice bro I have a Tacoma need to do some work on it!!u have more videos

Willing to sale the the headrrs??? Oor you able to make one????

Nice truck! Do you know if that corolla alternator would work on a 1980? If so do you remember where you got it or the part number?

I was wondering where did you tap into the ignition for the electric fan setup? Also by chance where would I be able to tap into the ac power(just so I can make my e fan turn on with ac)

Does your truck have power steering. I’ve been thinking about adding power steering to my 82 pickup.

DOPE! LOVE IT! SO QUICK QUESTION, WHAT DO U GOTTA WELD TO LOCK OUT THE DIZZY? IS THERE A VIDEO ON YOUR CHANNEL?