I love how the songs i was using to demo subs back in 2003 are still used today. Old School Classy.

That spray looks awesome.

Always a high standard of finish, awesome box 👍

You couldn't have built a better box if you had help! Great craftsmanship brother.

This is so beautiful. Not so big box and at the same time loud..

i just cant say enough about your knowledge of car audio and expert craftsmanship. you are in my opinion the meca god of car audio installation and specified test equipment.

now that is ultra professional!!! i love how it looks!

what a dream to have a box like that. never will I have that type of money to have subs or a box like that. that's a dream I would love to get someday

That is an awesome box. The paint gun sounds like an 80s sci-fi sound effect.

Steve Meade, I want your job sooooo bad. What a dream. Do car audio all day and make a bunch of money. Keep it up dude!

This is the first time ive ever seen a box made like this! And the CT Sounds to match! Dope af Meade!

Amazing box...sounds and looks awesome....nice work Steve!!!

Loving the old bass music, taking me back to the 90s. Damn I'm getting old.

I absolutely love my Ct sounds subs. Your box looks so sick dude!

you definitely do with love your services, sad that here in Brazil we do not have professionals like you, the few that we have as my friends that had the best SPL store in São Paulo stopped with their projects and they returned to the common premises because here it is not given value in primary services, CONGRATULATIONS...

box looks awsome. next time u do a layer box do it whit natural wood and clear coat it so it almost looks like a teak floor on a boat.

Dope! I can really appreciate the time and patience involved. Great work!

Impressive as always, love the builds and your innovation. Nice work.

That is a super clean build man. I keep hearing good things about these subs as well. Good work Steve and presentation.

I love the roller blade tool for screwing in the bolts. Nice!

Это шедевр. Такой сабвуфер 2х15" уничтожит эту планету, нам повезло и он ограничился на 2х8" )))

The box turned out great!

Full ulet! Just super! Brutal and creative!

Great Build, nothing like quality sound.

that box is dope!

Love the paint

Imperious young man. Truly a fan.

I'm ready to see some new builds for the new rides you picked up

looking clean

Beautiful work. If me I would add a second set of lights wired to the speaker's to flash with the music. Would love to see more like this👍

looks and seem to sound good too , if you wouldve put an end amp in there it be a great sub for a small to mid size home cinema too

When I saw the stuff you put on the box, the first thing i thought was "that's duct sealer!" I don't know what you paid but I pay about 10$ per gallon at my wholesaler. I'd love to know if its the same stuff. Bass sounds amazing out of that thing too! Thanks

YO ME PREGUNTO AQUÍ EN MEXICO "RICARDO RANGEL" PODRA HACER UN CAJÓN TAN CHINGON Y HERMOSO COMO ESTE

great job steve you did a awesome box.

From a bass head veteran like you Steve, are the meso 8 inch subs worth it???

Bravo..that looks so clean!!

Bravo,Top Box!

I really love this box

Great work

Meu brother vc e FERA viu

That's a work of art!! It's so professional 👌😎

Nice box.

Very clean

muito massa esse modelo,sou fãn dos seus projetos,parabéns!

Whats the Volume on this box and at what HZ did you tune it to? Looks very nice

sweet box

Damn steve you killed it brotha

I got a pair of 6.5 CT sound Meso on my back doors but got to send my car to the shop to have my door panels custom enclosure so they can hit nice even thou they sound nice right now but will sound way better when there in an enclosure

God damn thats one good looking box

"BRAVÍSSIMO" Very good.....Llove it! Thanks

best way to mount subs in mdf

good work.

virei teu fan tu e o cara

You do the most amazing work ever!!!!

Steve what is the overall external dimensions of that box??

Sick ass box!

да руки у тебя ростут из правельного места.Лайк.

I love the stainless hardware out of curiosity how thick was the acrilic and have you ever seen threads pull out of the acrilic?

What kind of glass did you use, cast acylic or plexi? 1/2 or 1 inch thick? and where did you find it im having a hard time locating some.

King of in car audio builds, I would love a setup made by you, especially now that my car was broken into and everything stolen :(

is it ok to also put on inside of the box or is it not a good idea?

Looks awesome texture

Hear a lot of wind noise. Did you seal all of the tapped through holes on the sub screws?

could spraying the port with that textured coating negatively affect the box tuning?

Wouldnt the bed liner make the port rough takin away from the smooth air flow?

5:39 means I need some CT sounds in my life...

I've only seen one type of 8sw that has higher rms ph than those. the apocalypse atomic8. those meso's look beast though. nice work man

So what are you peeps tuning your ports to. I am getting a soundqubed hdsv3.115 and they are trying to sell me a box ported to 46hz and that sounds very high to me for a 15 in. But they insist it's perfect tune for a 15.

Can't wait until I own my own shop to do cool shit like this lol

Versatex finish coating? The speakers are in the same polarity? how much for this set?

What did they apply to the box? And where I can buy it online. I'm from Panama

Mr. Meade. your work is the shit!!!

Someone has been eating your stool 6:17

would not mind seeing you do this in a 12" or even a 15 " box

The only better box to put an 8-incher into would be the kind that has legs attached to it! :D

Steve, can it snap a CD in the port... That test is pretty much a tradition for your boxes!

I think this would fit perfectly in my f150.

Hahaha Love the old school K2 rollerblader tool! You used to go to a place called Doctors Orders by chance bossman?

show de bola vocês mandaram muito bem

would LOVE to have something like that! 👍

What size speaker cable do you use steve? Looks beefy.

which is better raptor or that you are using

That is exactly what I need for my car how much did it cost to build it

you're awesome ! always an inspiration to all

Hey Steve awesome as always, what kind of power would make that optimum for everyday set up? I got a CT 10" Tropo in a 02 ZO6 on a kenwood 9105 and I love it.

i need this ,,but i dont have the stuff to do this ..lol.....how much would that box be !????.. please! ...Steve?

Any chance you'd share the files for this? Or maybe sell a flat pack kit so I can put it together myself, although I'd request adding some 1/4" dowel holes to align everything for the glue up :)

Wired in series or parallel ? came out great man

This thing looks so dope 😩👌🏽

I would put that in my jeep. I have a Memphis M5 12 now but I feel like this would be better for space and likely for sound as well

what would one of those boxes run I would love to have one for me 63impala. I don't care if its layered or regular fab

How low can those little bad boys go ... I am looking to downsize in my Subaru as the mojo 15 in the right size box takes away from campability in the back of the car but I still want some kicking sound

Have you measured the frequency response?

Would of liked to see the 24 layer design finish. Nice build though.

can you see the leds at the port?

Why not center the subs? Why the big gaps on the outside?

amazing build buddy!!! keep it up man!

That is one sexy ass box man.....props from some very quality work it shows!

What amp you running to them ?

wondering if this enclosure would work with the ct sounds hydro 8's.