Рет қаралды 721
26″ x 90″ Used Kingston Lathe Model HD 2690Swing Over Bed.......................................................................................26″
Swing Over Cross Slide......................................................17.5″
Swing In Gap.......................................................................35.1″
Gap Width in Front of the Face Plate................................10-5/8″
Distance Between Centers................................................90″
Width of Bed......................................................................15-3/4″
Height of Center from Leg Bottom...................................44.3″
Chuck Size.........................................................................16" 3-Jaw New Gator
Chuck Size.........................................................................20" 4-Jaw New Gator
Spindle Bore......................................................................4-1/16″
Taper of spindle bore and center.....................................MT#7 x #5
Type of Spindle Nose.......................................................D1-11
Number of Spindle Speeds.............................................12
Spindle Speed..................................................................13-1200 RPM
Number of Feed Changes...............................................16
Feeds per revolution - Longitudinal..............................0.0012″-0.039″
Feeds per revolution - Cross.........................................0.0007″ - 0.0188″
Leadscrew Diameter & Threads Per Inch......................1.77″ , 2 TPI
Range of Inch Threads (48)............................................1-42 TPI
Range of Metric Pitches(39)...........................................0.2 - 14
Maximum Travel of Compound......................................9.5″
Maximum Travel of Cross Slide.....................................15.8″
Tailstock Quill Travel.......................................................9.8″
Tailstock Quill Diameter..................................................2.9″
Taper in Tailstock Quill...................................................M.T. #5
Main Drive Motor............................................................15 HP
Coolant Pump Motor......................................................1/8 HP
Floor Space.....................................................................R-L 217" X F-B 60"
Machine Height...............................................................60"
Machine Weight..............................................................8,000 Lbs.
Taper Attachment...........................................................Yes
Steady Rest.....................................................................Yes
Coolant Pans & Pump.....................................................Yes
Note:
Machine will be cleaned, painted two-tone light and dark grey and
cycled