10 tips to grinding your sausage meat perfectly

Рет қаралды 143,585

Күн бұрын

#Celebratesausage
If you would like to support our work (and receive lots of discounts from companies that you're probably already buying from) visit us at Patreon: / 2guysandacooler
Knives that we recommend
Kotai Chef Knife: kotaikitchen.com/?ref=2guys
For 15% off your order use the discount code: 2guys
Welcome to Celebrate Sausage. Today we are Showing you 10 tips to grind your meat perfectly.
Sharpening stones for grinder knife and plates: • Sharpening a Meat Grin...
(Be sure to select the correct size and coarseness)
We want to thank the sponsors of this years show and we invite you to check out their stores for your charcuterie needs.
The Sausage Maker: www.sausagemaker.com/?Click=1...
Casings: www.sausagemaker.com/sausage-...
Cures and Binders: www.sausagemaker.com/meat-cur...
Stuffers: www.sausagemaker.com/sausage-...
Grinders: www.sausagemaker.com/meat-gri...
Smokin It Smokers: www.smokin-it.com/
Eva-Dry Dehumidifiers: www.eva-dry.com/
Apera Instruments pH meters: aperainst.com/
If you have a KZfaq channel and would like to be considered for a part in Celebrate Sausage 2021 or if you are a company and would like to talk about sponsorship you can contact me here: twoguysandacooler.com/contact-us/
CELEBRATE SAUSAGE SPECIAL: Meredith Leigh's Online Charcuterie Intensive Workshop. Her classes cover a wide range of topics for the beginner and the advanced sausage maker. She has extended a special Celebrate Sausage discount till December 31, 2020.
You can check out her online course here: learn-meat-curing.thinkific.c...
Add the coupon code: CELEBRATESAUSAGE for a discount on on class or the entire course..
Books featured on this series:
Charcuterie for Dummies (Mark LaFay): amzn.to/3cepeWf
Pure Charcuterie (Meredith Leigh): amzn.to/2RGIuCb
The Ethical Meat Handbook (Meredith Leigh): amzn.to/35RuVbe
Charcuterie (Michael Ruhlman): amzn.to/35PZVbL
Salumi (Michael Ruhlman): amzn.to/3iMG8h6
Also be Sure to check out our Amazon Store front to see all the things we use: www.amazon.com/shop/2guysacooler
(These are Amazon affiliate links. This means we get a small commission if you make a purchase using the links we provide. This really helps support our channel at no cost to you. Thank you in advance)
Vitamix 750 Heratige Pro Model amzn.to/2PFXe1d
Vacmaster Vacuum Sealer amzn.to/2wQp7wF
Chef's Knife Yaxell Gou 8inch amzn.to/2QqanwC
Wusthof Boning Knife amzn.to/2Nvns9b
Edge Pro Professional knife sharpening Kit #3 amzn.to/2NvAO24
Iwatani Professional Chef Torch amzn.to/2zUzm4E
Sous Vide (For home use): amzn.to/3ht6mos
Apera pH Meter w/meat probe (Bluetooth): amzn.to/2A04Gll
InkBird Controllers temp & Humidity amzn.to/2O3BmM7
Dehumidifier Eva Dry 2200 amzn.to/2wwKjqs
Dehumidifier Eva-Dry 1100: amzn.to/3hMyH84
TaoTronics Humidifier amzn.to/2C0waYy
My Absolute favorite thermometers:
• Thermapen Mk4 - www.thermoworks.com/Thermapen-...
• DOT Kitchen Temperature Reader - www.thermoworks.com/DOT?tw=2G...
• Signals (4 Channel Temperature Probe) - www.thermoworks.com/Signals?t...
• Extra Big and Loud Kitchen Timer/Alarm - www.thermoworks.com/Extra-Big...
• Pocket Temp/Humidity Meter: www.thermoworks.com/Pocket-TH...
Thank you for watching. If you are new here consider subscribing and clicking that notification bell. If you have any questions about anything you saw feel free to reach out or leave me a comment in the comment section. See you in another video.
Eric

Пікірлер: 144

@paulbradshaw4511 2 жыл бұрын

As a retired chef, I must say this is a pro culinary video, very nicely done, great information. Thank you!

@bl8388 Жыл бұрын

Agreed. Clear and helpful for us new grinder cooks, too.

@andrewwheeler2737 Жыл бұрын

Wait chefs retire? What’s your secret?

@eileenfb1948 Жыл бұрын

Thank you so very much for all the information you give us. Fantastic to understand exactly WHY, rather than just being told which way to do it. This is so helpful. ❤

@miguelesteves9740 3 жыл бұрын

Very methodical and clear guide! Congratulations, this is very valuable.

@martintowse6812 2 жыл бұрын

Thanks for sharing your wisdom.

@ChileExpatFamily 3 жыл бұрын

Thanks again Eric for the help and videos. Jim in Chile.

@shawnenser2610 2 жыл бұрын

Thanks for the great advice. Takes out all the guesswork.

@JasonSmith-qx3zh 3 жыл бұрын

Excellent video thanks for all you do!

@tmeinhart7647 3 жыл бұрын

Great tips Eric.

@spindleswift8667 Жыл бұрын

This will help me a lot! I am fortunate to live in a place where I can buy fresh sausage, but I like to make Norwegian-style sausage that I can't purchase. And now, my mom has been put on a cruel diet that bars her from eating commercially available sausage, so I need to get creative to keep her happy!

@russbarker2727 Жыл бұрын

Some very useful tips in this video. Thank you Chef.

@heartSLB 3 жыл бұрын

This video is golden! Thank you

@jeffreyim Жыл бұрын

Really nice tip about freezing the components!

@HYPNOTIZEMINDS100 3 жыл бұрын

Perfect detail video watched about 20 other videos but none as detailed as this . Thanks

@sarathdayarathna4490 3 жыл бұрын

Excellent advice thanks.

@MichaelJones-be2ke 3 жыл бұрын

Excellent very informative!!

@sludgenet 3 жыл бұрын

A+ For helping hobby sausage makers make the best product possible!

@2guysandacooler 3 жыл бұрын

You are welcome. Thanks for watching..

@Madskills-hw2ox 3 жыл бұрын

Absolutely

@TheJohnaddison10 3 жыл бұрын

Great tips. Thanks!

@explosivefitnessuk Жыл бұрын

Lots of great tips! Thanks!

@gondzikas1 3 жыл бұрын

Thanks, greetings from Lithuania

@mehmetdeliormanli2043 3 жыл бұрын

Great info, you can also use different grit size sand paper cut to size for sharpening (with a plate as backing) not all of us can find wet stone to fit.

@spindleswift8667 Жыл бұрын

I bought a glass plate and grit paper last time I needed to sharpen. Now I have a marble cutting board I'm planning to use.

@user-qu5ro5ur1u 7 ай бұрын

Really good professional advice.

@ftswarbill 3 жыл бұрын

Thanks for sharing Sir.

@karlh6663 Жыл бұрын

Great info. Nice video

@velmamilagros 2 жыл бұрын

Wow !! I'm learning a lot!! Thanks!!

@miklin6203 2 жыл бұрын

Great video, summs it all up!

@Subhematoma 3 жыл бұрын

Great great information, thank you. You are well spoken, easy to understand couple that with bonus information like magnifying your blade to help educate me. Just thank you sir for your time.

@2guysandacooler 3 жыл бұрын

Glad it was helpful! Thanks for your comment.

@tashingabravechaitezvi8596 Жыл бұрын

Very useful information. Thank you so much. I feel like a pro after watching this. 😎

@fabiocaputo4121 3 жыл бұрын

Great info.

@davidedgerly Жыл бұрын

Glen & Friends sent me here... This is a one and done if your looking for the tricks, tips and techniques you need to make sausage... Thanks for this brother!!

@victorviola 2 жыл бұрын

You are a legend. Thank you for the content.

@Johnwillbegone 3 жыл бұрын

Very helpful...thank you.

@toddstropicals 3 жыл бұрын

Some great tips! I just ground some wild boar yesterday,and will be putting the sausage in casings today.

@2guysandacooler 3 жыл бұрын

Oh Nice. I bet that'll be good!!

@tubenube 3 жыл бұрын

Wow! What a great tutorial thanks. Wish I’d seen it a few grinds ago. Lots of sludge! Never knew the grinder needed so much help.

@2guysandacooler 3 жыл бұрын

Glad it was helpful!

@donotlike4anonymus594 2 жыл бұрын

@@2guysandacooler Seriously man... i've been watching and following up on your sausage making videos and i never had much of a problem with cheap grinders and i mean cheap! Even for very large quantities of meat... (Unless the grinder is running 12 hours a day Half an hour grinding half a hour in an industrial freaser the prices are insane...) Why pay over 1000$ for a meat grinder? I simply don't get it.... And now i've started to look for thoes 4 in one stand mixer's with a grinder... I mean seriously.... 100 bucks... And should be 100% fine I'd like an answer... Because maybe idk... there is a drastic diffrance when making a lot of meat But i simply see this as waste...

@brianhopkins6657 Жыл бұрын

Great video well said!

@BEAdventurePartners 4 ай бұрын

Excellent video! Now to give it a go!

@lLvupKitchen 3 жыл бұрын

Very professional. Thx a lot.

@cachi-7878 2 жыл бұрын

Excellent!

@elmiguel6725 3 жыл бұрын

Very interesting going to my friends house in January, and we are going to make sausage, can't wait.

@HogMan2022 Жыл бұрын

Great video Sir!

@abmagrum5360 3 жыл бұрын

thank you for the great video

@liltonysoprano Жыл бұрын

Thank you.

@erichcapin3350 Жыл бұрын

Needed to know this , can't thank you enough

@cs7717 Жыл бұрын

Wow, very helpful. I never knew you could sharpen your knife, let alone how to do it. I'll have to check to see how sharp my knife is. I have a suspicion it is not very sharp after all the turkey bones I put through it along with the meat. No it wasn't for humans, it was for my dog.

@ddhrsa 3 жыл бұрын

Great video

@marcelog.2916 8 ай бұрын

Very usefull tips eric! Thanks for sharing ❤❤❤

@giorgiozanco4111 3 жыл бұрын

YOU ARE SUCH A SENSEI! BEST VIDEOS OUT THERE IN ANY POSSIBLE LANGUAGE

@2guysandacooler 3 жыл бұрын

Wow, thank you very much!!

@Madskills-hw2ox 3 жыл бұрын

bulletsholes Crow pie I’d try it if he made it.

@dsomlit Жыл бұрын

Thank for sharing, I wish I have watched your videos many years ago .

@bangkoknik5124 2 жыл бұрын

Brilliant.

@isaacsieberts9567 3 жыл бұрын

thx love it

@dancummane3668 2 жыл бұрын

Thanks 🙏. That was what I needed to watch. Sausage Time!

@megascrim750 Жыл бұрын

Thank you so much fantastic ,👋🙏

@user-tuser02 Жыл бұрын

Cool thanks

@leeshaw3237 3 жыл бұрын

Excellent video. Keep up the good work mate. From The Pie Guy in China

@pensadorrealista2825 2 жыл бұрын

Hello Sir, I have no comment at all, I only have to say THANK YOU! I have been learning alot with your videos. Thank you very much Sir!.

@georgedittemer9427 3 жыл бұрын

I have used the same approach since 2016 when I started grinding meat, An agreed you Get superior results.

@MANorthey Жыл бұрын

Great video Could do a video on : meat grinder buys guide

@neil999ish 18 күн бұрын

My dog loves when I make sausages. He gets the silverside and sinew offcut. Lol.

@d.s7741 2 ай бұрын

I put some food grade mineral oil on the thrust bearing (bushing), and start up the grinder and drop a little olive oil down the feeding tube and onto the auger.

@RRaucina 3 жыл бұрын

Not to be contrary for the sake of argument, but as a saw blade sharpener, that view of the sharpened knife is just a good start, but the edge is still not defined and the stone was too coarse. I would hand hone that knife on 200/320/400/600 3M paper wet on a granite surface. That will bring the coarse grind pattern to fine and define the cutting edge. Brilliant content here. At the moment I am motorizing a # 22 Porkert grinder to 186 RPM with a direct drive 3/4 HP motor. All of those Chinese grinders are compromised by various quality downgrades to keep a price point. Have you searched Porkert grinders motorized? Most are from East Europe and rather fascinating for the grind quality. Got a few of your Capicola's in the fridge now. Cheers!

@Piroska.QuantumSomatics 3 жыл бұрын

Excellent feedback. The Kitchen Aid meat grinder I purchased for small jobs, did not come with any instructions. I learned the hard way about crappy product. Just the second grinding it burned out the motor on the Kitchen Aid. Meat temperature: check, blades; new, I had the unit in the fridge before but not the freezer. Just grinding 2 kg meat+fat, stopping to remove silver fascia regularly, I still burned out the motor! Before proceeding to further in this hobby, a purchase will be made for a proper equipment. These severely overpriced, yet severely below standard grinders should not be sold.

@garyvee6023 9 ай бұрын

Awesome. I bought a grinder today to grind some chicken meat (17 roosters) that I am processing tmrw. My wife wants to try chicken lasagne, chicken burgers..., and I thought what about some chicken sausages. 😋 Subscibed..., looking forward to the rest of the vids. 🥰

@jetx2710 3 жыл бұрын

Can you do a video of a kitchen aid meat grinder or hand- crank meat grinders

@Supergasolina 3 жыл бұрын

Oh nixe today in White Thank you from Frankfurt/ Germany/Ramstein

@mikem8010 3 жыл бұрын

Hey Eric. Love the videos this month! What blades amd plates do you use and where do you get them?

@2guysandacooler 3 жыл бұрын

Hey Mike. In this video I'm using blades and plates from LEM.

@matthewg4956 3 жыл бұрын

I need to get me some honing stones for my grinder.

@2guysandacooler 3 жыл бұрын

They are pretty sweet. A little on the fragile side but if you are careful you can save yourself from having to but lots of extra grinder knives!!

@murdocks8242 6 ай бұрын

Thank you so much for your videos! Do you happen to have a chart for which plate to use for different products?

@neil999ish 18 күн бұрын

Some books give a rough guide of what plate to use for wich 'variety' of sausage you are making. The beauty of sausage making is you can 'go' your own way and customise your sausage to you what you want and not the mass produced commercial sausage from chain stores etc.

@ericfoster3636 3 жыл бұрын

Cool tips on meat cut relation to plate size. Well they are all good but I learned about the cut/ plate relationship from this.

@ShaftManlike 2 жыл бұрын

Hi You've really inspired me. I have a LF&C food chopper. Is this appropriate for grinding meat?

@gregorywinters4697 3 жыл бұрын

I was given a older meat grinder that was a little neglected. I am not sure if the housing is casted iron or stainless steel. Its magnetic and the duller areas, like the threads and the part that connects to the motor, seemed to want to get a film of rust fairly quick if I didn't dry it off quick. I can not tell if its the cast or pitting inside the housing near the back back closer to the drive. My question is how concern should I be about it if it is pitting? Will good sanitation practices be enough to not worry about the possibility of this harming my product? Is pitting or pour cast even a concern?

@shannonandnickfarstad8070 2 жыл бұрын

perfect tips really appreciate the info, I do have question where can I buy the wet stones for sharpening the blade and plates. I own a #32 LEM big bit grinder. Thanks again

@2guysandacooler 2 жыл бұрын

Here's where I bought mine: amzn.to/3rAEZjt Be sure to check the size and the grit

@JasonSmith-qx3zh 3 жыл бұрын

How do you sharpen them???!! Oh I guess I need to know where to buy the sharpen and you just answered that lol!

@nmcdonne5212 3 жыл бұрын

Great video Eric. Just wondered whether you simply put the sausages made that are still pretty cold directly into the fridge or vacuum pack and then into the freezer?

@2guysandacooler 3 жыл бұрын

If they are fresh sausages and I plan on freezing them I will generally vac pack and place them in the freezer. If they are cured sausages I will usually leave them in the fridge overnight then freeze the next day.

@leedoss6905 2 жыл бұрын

I lap and polish my blade and plate on a granite surface plate so the blade and plates or a perfect match.

@Madskills-hw2ox 3 жыл бұрын

I’ve gotta go back and start catching up! Holy. Great shows my friend

@homelessombudsm5785 2 жыл бұрын

Where can one purchase these grinding stones that fit meat grinders...specifically KitchrnAid machines?

@jorknow 3 жыл бұрын

What is considered good or bad fat when trimming meat to grind ? For example, briskets have the really hard fat along the point or the softer fat along the other side

@2guysandacooler 3 жыл бұрын

Great question. With the exception of leaf fat (used for lard) which I don't use for sausage or salami the rest of the fat is good to go. Soft fat trimmings, intermuscular fat, backfat are all good as they all provide different textures in sausage or burgers. The softer fat is much easier on the grinder but usually the harder fat provides a different texture and mouth feel. At the end of the day it comes down to what you are making and what you prefer (or what you have on hand).

@butchwilliams825 Жыл бұрын

Eric I saw someone recommend using a dough hook rather than a mixing blade, any thoughts on that?

@acarrillos 3 жыл бұрын

Hi, again from Mexico, Iodophor is not available here, any sugestion of characteristic I need to consider to choose a good sanitizer?

@2guysandacooler 3 жыл бұрын

You can use a 2 Tablespoon per 1 quart bleach solution as a sanitizer or you could use a vinegar solution as well. In Mexico I'm not sure what the names might be..

@DonJen2478 Жыл бұрын

Great tutorial. This is the first time that I get to use my Ship to Shore electric grinder. When using the plates, does it matter which direction to place it on the grinder? Thank you for sharing this video.

@2guysandacooler Жыл бұрын

no. you can place them either way

@DonJen2478 Жыл бұрын

@@2guysandacooler, Thank you...

@EvaggelosSinapidis 4 ай бұрын

Thank you for this video! I have a question regarding meat temp before grinding. What if you leave the meat for longer time into the freezer and the meat temp is 20-30F. Would this cause the meat to smear?

@2guysandacooler 4 ай бұрын

There is a limit. If the meat is super frozen and your grinder can't push it out then it could also cause the meat to smear. If you have a very powerful grinder though, it shouldn't be a problem

@carlosmarino2678 3 жыл бұрын

What size stuffing tube should I use for 38mm pork casing?

@2guysandacooler 3 жыл бұрын

You can use 1/2 inch or 3/4 inch. The 1/2 in would probably be a more comfortable fit..

@KingGeneral21 Жыл бұрын

Very useful video! What causes the fat to drip out everywhere then? It happened to me and left it dry on the inside

@2guysandacooler Жыл бұрын

Check this video out: kzfaq.info/get/bejne/lbSBrJp6urGXg5c.html

@KingGeneral21 Жыл бұрын

@@2guysandacooler thanks!

@TheDevnul 3 жыл бұрын

Thank you!! That’s what that grey stuff is😕

@2guysandacooler 3 жыл бұрын

You are very welcome. just loosen the ring just a bit and you should be good to go..

@sonnysparby7788 Жыл бұрын

How much Iodophor per spray bottle, and how long will it keep in the bottle? Thank you!

@davidwyatt6617 Жыл бұрын

I am new to making sausage and am now purchasing the necessary equipment etc. I am learning a lot from your channel. I have a question about sanitizing. Do you use iodophor spray on all your stainless steel items that may touch raw meat?...bowls, sink, trays etc...not just the grinder components? You said you would wait 2 minutes, then wipe off the items...my reading about iodophor is to let it dry, then you can use the item. Wouldn't wiping the item down with a "clean" towel possibly introduce bacterial contaminants? Thanks so much.

@2guysandacooler Жыл бұрын

Hey David. First of all welcome to the craft!! It's amazing. When it comes to iodophor you can go either way. Letting it dry is the best way but truly either way works. Just make sure your towel isn't contaminated 😅. Let me know if you need any advice

@davidwyatt6617 Жыл бұрын

@@2guysandacooler Thanks...I look forward to adding sausage making to my BBQ portfolio. So do you use iodophor on all the items that may touch raw meat, not just the grinder?...or is washing those other items enough? Thanks.

@MattVanZeeland Жыл бұрын

Meat grinder question. In your experience what seems to be normal heat production for the motor/gear assembly? (LEM, Cabelas, MEAT type grinders) Without the grinder head and parts attached, my new LEM 12 grinder gets quite warm to the touch at about 20 min run time. Especially around the spline drive shaft area. Does that seem like normal electric motor heat production in your experience? Thanks Matt

@2guysandacooler Жыл бұрын

Yeah. I find that the smaller grinders get hotter faster. I would grind for 10-15 or so minutes, then take a break and let it cool down.

@MattVanZeeland Жыл бұрын

Thanks for the quick reply. Good to know that the motor/gear heat is normal. Ofcourse with your above video advice, much of the heat can be mitigated by freezing the grinder head, auger, cutting faster with sharp blades, etc... Thanks again

@davidpettit6727 3 жыл бұрын

Just found your channel through Glen and friends. Just what I needed; another channel that I feel compelled to binge watch! Thanks a lot. I have watched quite a few already including the pro tips (twice on those). maybe I missed it or just haven't gotten there yet, but I don't recall a conversation about natural casings vs collagen vs fibrous. I am familiar with fibrous and know their uses; and I have used both natural and collagen. What I used collagen for was some chicken sausage that was boiled to cook it. The casings became thick and chewy - not good eats. But now I find that all of the butcher shops around are using collagen for their snack sticks, which is what I'm making next. I can't get my hands on natural sheep casings in the time frame I need them, but I have some collagen casings that I bought and then haven't used because of the disappointing results of the chicken sausage. I know it's a long ways to get here, but here are my questions: was the poor result from boiling the sausage? Would I get a decent snack stick using collagen in dry heat for cooking?

@2guysandacooler 3 жыл бұрын

Hey David. Welcome to the channel. Collagen casings tend to be a little chewy especially if they are boiled. Typically they are used (like you witnessed) for small diameter sausages. What I like to do when I'm cooking with collagen casings is to let them dry out a bit before cooking then I'll brush them with olive oil a few times through the cooking process and this produces a nice bite. It imitates the "snap" you might get with sheep casings. Hope that helps. Let me know if you run into any issues. Welcome to the channel.

@davidpettit6727 3 жыл бұрын

@@2guysandacooler Very helpful Eric...thank you and keep up the great work!

@realspido Жыл бұрын

What are the proportions of the meat and fat ground on 3mm plate and 5mm plate?

@moosemanmagee4495 3 жыл бұрын

What type of oil vegetable?

@2guysandacooler 3 жыл бұрын

that is correct. Something light. Sunflower, canola, vegetable...

@stephencarey5074 3 жыл бұрын

Interesting vid, but no mention of the %age fat to meat? In Philippines the fat on pork is much thicker than on European pork, so how much do I need to use - preferably for the leanest sausage? I want to make the likes of English sausage - pork and leek, garlic, tomato, mustard etc etc. Do you have vids for those? (Lots of questions but it will be my first sausage making attempt!)

@2guysandacooler 3 жыл бұрын

15-20% is a nice place to start and see how you like it. Perhaps use hind leg and add back fat to it.

@tsankotsankov9772 2 жыл бұрын

Hi , where to buy wet stone from

@2guysandacooler 2 жыл бұрын

I bought mine from amazon: amzn.to/3Bo9gnA

@BrianPellerin Жыл бұрын

5:11 this spray bottle sounds like a mosquito buzzing

@_ChuckRoast 3 жыл бұрын

To sanitize I like to use "Star San" made by Five Star. I also use it for my Home Brewing Equipment. "Star San...Don't Fear The Foam!"

@InvestorAcademyPodca 3 жыл бұрын

Any plans for 10 tips for your second grind? The first grind is easy, the second grind is always a test of patience as the tube gets plugged, the stuffer gets suctioned down and the process takes 20 times longer than the first grind.

@2guysandacooler 3 жыл бұрын

Done. I'll show you the coolest trick ever. Stay tuned

@edsmith4414 3 жыл бұрын

Use a LARGE 40mm plate on the first grind, mixing the seasoning in before grinding. This allows a good mixing of fat and seasoning, but keeps the meat in large enough pieces that the second grind isn't near as hard to do because the mix is still in large pieces....the auger has something to grab and push thru. Then I use a 7mm plate for most of my sausage, like regular breakfast or summer sausage stuffed in casings. For smaller things like bratwurst or hot dogs, I use a 4mm plate.....but it do have to use the pusher down the throat in order to feed it out.

@dominicfong6341 2 жыл бұрын

Had a hard time using my newly purchased grinder yesterday but everything went smoothly after after following your pro tips. Thank you very much sir.

@flintycave5634 3 жыл бұрын

I only just realized this guy was using an electric grinder

@wanluqmanhakimwanhamzah2309 2 жыл бұрын

Now I know why my grinder not grind meat like how it suppose.. I put the blade the wrong side.. that's all

@gschady 3 жыл бұрын

good content .. drink every time he says the rachel ray "my" my my my my m .............

@idahopotato5837 2 жыл бұрын

7:58 Isn't that silver skin or something that should of been trimmed off?

@2guysandacooler 2 жыл бұрын

no. That was a membrane. Totally fine

@manoliskarras6452 3 жыл бұрын

ΚΑΛΟ ΑΠΟΓΕΥΜΑ.......... ΒΙΒΛΙΑ ΣΤΑ ΕΛΛΙΚΑ ΕΧΕΙΣ .....ΘΕΛΩ ΓΙΑ ΣΑΛΑΜΙΑ........... ΚΑΙ ΤΑ ΜΠΑΧΑΡΙΚΑ ΑΝ ΥΠΑΡΧΟΥΝ ΣΤΗΝ ΕΛΛΑΔΑ .........!!!!!!!!!!!!!!!!!!

@doylesouders1228 Жыл бұрын

Wow! Been making sausage for years. The big learning for me on this video was to not use that plunger and force the meat through the grinder. Clearly I have been doing that. Second learn was to really observe the meat coming out of the grinder.