At the end you forgot to show us the low beams alone

you have no idea how much of a help this was 😭😭

This is great dude. I have custom built headlights and blinker/fog lights, all LEDs. When I did this it turned my blinkers/fogs into my DRL's. Looks awesome!!!

thank you very much man! i fixed my problem, greetings from Mexico!

Finally the correct way. Thank you.

I have a 1990 S10. This was the only technique that worked. Thanks much!

It worked at first. Now they come in when i first start it. In a few minutes they do go off though. Everything works as it should otherwise. Thanks. Saves the battery and light bulbs.

One other way, push your E-brake ever so gently until the light on dash shows up. All your drl and auto nighttime lights stay off.

I have a 96 model s10. I'd like to buy after market led headlamps for it but I would have to do some wiring to make the DRL option work. I don't know how to wire things up.

Very helpful, thank you

Genial, muchas gracias!!!

so you have too turn on your night lights the manuel way from the switch?

How does it look with out high beams?

Sorry for the cut off on my comment earlier!!!!!! Like I was saying brother you are a Genius I see so Manny videos out there but none of them come close to yours!!!!!!!

Mcjoyriders what if you pulled the fuse and the drl never turned off?

ok but i have a 02 chevy blazer ls and i did have drl and high beams for a while but i didnt know that i only had one high beam and now i have no drl... i change the bulbs for the high beams.. nothing happens and the drl arent even coming on.. and i replaced the fuse and still nothing... i check the wire for the high beam and theres power going into the wire but i put a new bulb in didnt light up... explain that??

If you have HID's like me, an don't use your high beams simply remove the fuse. That is all.

YOUR THE MAN

Heeeey thanks bro, great video, drls wouldn't shut off and drained my battery and I'm in effect homeless, your a blessing friend =]

thankyou！very much.very useful for me。。

I have a problem, once my drl triggers on the low beam turns on as well !! I dunno why and how to make my drl works alone ?!

Thank you 🙏

How do you disable the automatic headlights from coming on? I know if tou have the parking brake on the dont turn off. How can tou disable the auto headlights and tail lights from coming on?

Yeah I pulled my breaker out and the lights stayed on my 2000 S10 Blazer second generation so what's up with that

I followed your instructions more than 3 years ago in order to disable DRL and it was perfect. Also disable the AHL inserting the resistor on passenger speaker. Everything perfect, recently I decided to place the high and low lights at the same time, for this I made ground with the yellow wire of the low lights on the driver's side and to my surprise the DRL mechanism was activated again, when disconnecting the grounding the DRL returned to deactivate, any suggestions?

good video for a blazer is the same thanks

I have a Chevrolet S10 2000 when I pull my eating mergency brake the lights come on during the day automatically I don't want that

on a 96 you can just pull the fuse in the fuse box in the cab. High beams still work like normal.

Okay - what you didn't show was the low beams working with this setup... Hope they work cus I'm gonna do it...

I did the mod n the lights are still on. 😔

btw does low beam lights work too? or no?

Ya see...When you unplug the sensor on the right side of the dash and put a 2.2 k ohm resistor in. They also stay off at night until you turn the headlight switch on.

THANX

I did this mod, but now my high beam indicator light on the dash doesn't work. It could have burned out, but I swear it worked fine before this mod. Weird...

It didn't work for my 2003 Sonoma

It didn't work on me. I have a 2001 blazer ls. Idk what else to do.

For my 2nd gen all i did was pull the fuse inside the box on inside of cab and all my lights function fine. mine also is a 94

Hi. Thanks for the video, in my 2000 Blazer pressing the button 4 times didn’t work. This did. :) Do you have a video on how to switch off the Auto Headlights? I have looked on KZfaq and can’t find anything that can help me. Thanks again.

And the low beams, what's up whit them, they don't turn on whit the switch

I have aftermarket led in my Sonoma but when I put the truck in drive my day time running lights don't work and when I urn on my brights my driving lights turn off any help please?..

Didn’t work on my 99s10, pulled the DRL plug and the lights didn’t even cut off ! I also have tried the push done override 4 times

You missed the 2.2 k ohm resister for the eye on the dash

Didn’t work on my 98 gmc jimmy which it should have because same style need help with mine cause I hunt an want to pull in the field with no lights on at all

Ok brother 👍

The lights stayed on even after i pulled the relay on my 98' s10 blazer...the dome overide button trick didnt work either...help...anybody...🤔

I did the little button to, still didn't do nothing and it's just a 2000 S10 4 wheel drive Blazer 2 door

I have a 2000 chevy s10. Reading the comments below Someone says to push the dome light over ride button four times to make the lights not come on. bingo he was right. Thanks...

My lights work but not my park lights what is wrong

What works on a 2000 model? Because this didn't work on my 2000 model.

So you say your dome override three times doesn’t do that for you? I’ve heard a lot of people try telling me theirs doesn’t do it. I haven’t found one that hasn’t including the same people that told me they couldn’t do it with their truck 🤣 and the guy up there talking about how his parking lights and blinkers stay on. That’s what the override option is for 🤣

Does not work on 99 Zr2 s10

tried this on 02 xtreme and it worked for a day then the drl came back on the next morning

That’s fine for running lights how about the auto on lights

Does anyone know the purpose of DRL's?

Didn't work on my 2000 S10

All you have to do is push the button inside 4 times they will go off lol

Can someone please tell me where the damn fuse to the inside lights are I don't care about the outside lights they aren't the problem my map lights won't shit off I've gone through for a week now and it's really getting to me this isn't how I dreamt having my first truck would be like

HELP! Followed all the steps and my day lights still on.

Daylight lights still turn on automatically at night though

You are calling this a "fuse" mod. This is a RELAY mod. On my 98 4cyl truck it was easy. Remove the DRL fuse, remove the DRL diode (shunt, black "fuse" with an arrow pointing at a line) from the fuse box, and put a resistor in the automatic headlight sensor in the speaker grille. And BOOM Bob's your Auntie. My 99 4.3 v6 truck is a different animal. I will try this mod to the RELAY. I have several of them so if it doesn't produce good results, I don't have to go buy a new one.

That is a relay, not a fuse.

that shit didnt work. on my 02. maybe like somebody said mine is not considered second generation. i still have to push the button like 4 times after starting the engine.

I like my drl lights. They keep the cops from ticketing me when it's raining. Stupid laws.

My regular headlight dont come on

u don't got to do all that the little button under the light switch just push it 4 times fast and it's that easy

Anybody see that round button near the headlight switch? push that 4 times real fast and it does the same thing,duh,you will even get an alarm when the lights shut off.That prong on the relay is usually there for a reason.

I took my relay out and headlights still on. I can push the button 4times and turn them off but i hate doing that every time i get in the truck.

u can just push the dome overide button 3 times quickly and they shut off….

Click the override dome light 3 times and it disables the lights

Did not work on my 2002 but maybe that is not considered a second generation. The only thing that changed even with the relay out or 85 bent or 86 bent was left inner high beam wouldn't work with the relay out. I'll find another way unless you know of another simple way. Tried engine running or not too. I sure like my street rods better than these new offbreed vehicles. Thanks anyway.

This didn’t work on my 98 S10. I even pulled the fuse, and my DRL stay on. the only thing that happens is my one high beam doesn’t work, but the DRL’s stay on! Anyone have another option? Please help! I just want to run my parking lights so I look cooooooool 😎. Thanks I’m advance

You are not taking out the fuse. You are removing the RELAY

Why not just snip the relay prong off. Looks jenke bent over and mat be hot.

Take out drl bulbs out

This procedure did not work for me

But that’s not the fuse……… 9 yrs later

how i do it for taho 2004 can you send or make anther video thanks

That’s not a fuse. It’s a relay. The fuse is to the left of that. And if you pull the two fuses you won’t have any working head lights.

I actually like my DRLs what’s the big deal why don’t people like’em? 🤷🏻‍♂️

Bending terminals on a relay is a dumb idea. The proper way to accomplish the same thing would be to remove the relay, make a short jumper wire with the same terminals and run it between the 30 and 87a terminals in the fuse block.

I can remove the fuse and light would still be on

on a 2003 Chevy blazer 4.3, this does not work. try again buddy. even removing the relay completely does not solve the issue. Only ushing the button 4 times does.

Not zr2, nor resistor nor 86 nor dome nor parking brake!

Damm brother your a

Why would anyone want to drive with the daytime driving lights off. They help other drivers see you in the daytime as which is why many cars have them. The daytime driving lights on the Chevy S-10 and GMC S-15 while on are powered with less than 12volts, but when the high beams are on they are powered with 12volts which is why they are not as bright as when the high beams are on considering they both use the same filament bulb.

It dnt work for me ? Only one else

You pulled the relay . The black box is not the fuse that is the relay. Smh. Stupidity in America from our future. Parents need to take the responsibility of this stupidity yawlvthe ones to blame not the kids.

Ghetto rigging, just take a pair of cutters and cut it off.

Idiot pulled the relay initially for DRL not fuse as he said so of course the headlights did such. Relay vs fuse are not the same nor can you associate them like same. He needs to learn definitions of each or better yet just don’t make any more videos because his knowledge isn’t up to par and thus his example can cause a wiring issue to others abs be hazardous.

another way is unscrew the pb wire

i tryed that doesnt work on my s10..but i found out how to fix it with a short roller paint brush and simply prop the emergency brake down an inch or two which doesnt cause your brake to contact the rotors at all..the brake wont contact the rotor till you hear the emergency brake click as you push it down so proping it down a little ways doesnt hurt at all..to test this simply scotch front wheels,take it out of gear jack up the rear of your vehicle and turn your wheels and see if the brake is holding,which it wont be///works perfect ...just remember the roller brush will fall out if you set the emergency brake

and i suggest if you mess with your relay go get a pare at the junk yard just in case you break the prong

u don't got to do all that the little button under the light switch just push it 4 times fast and it's that easy