Make sure to checkout my instagram to see behind the scenes: 2_vintage_ New Classifields option on my forum where you can post your bikes, quads, scooters, etc for free: 2vintagerider.com/classifieds/ My Second Channel: kzfaq.info/get/bejne/irZ1ms2S0qq8Z6c.html Thanks to everyone who watches and supports the channel!

Why do so many people hate the man makes a living off of buy fixing and flipping bikes STFU do y'all watch just to hate help or be quiet.. Nice content keep up the good work and vids

Let that thing idle partner. Cold seize acomin.

Just so u know brutha , to bleed brakes...you keep the bleeder nut closed, pump the brakes until it’s gets real stiff and hold the brake pedal down, crack the bleeder nut open until the pressure is gone then close it again. Release the brake pedal. Then pump the brakes up tight again holding brake pedal down (this holds the pressure in the line) then crack the bleeder nut open again. Repeat this until you don’t see any air bubbles coming out. Pumping the brake while the bleeder nut is open just allows air back into the system. We all do things incorrectly at times. No big deal. Just learn as u go. Nothing wrong with that.

14:07 when u have only ridden quads in a while

your a very reasonable person,people around here want 2500-3 grand for a filthy,rusty,beat up dirtbike.i would do business with you

You need to learn how to properly bleed brakes. That was cringe watching you try and bleed the back break like that

Your all putting negative comments yeah he might not have the best knowledge in bikes but fair play to the lad giving it a go and if you don’t like it don’t watch rather then making negative comments and he’s learning as he goes which is the best way to learn keep it up bud well done 👍🏻

you make bleeding brakes way harder than it is....should take about 2 minutes with no water bottle....wish i was closer to show you some tips

All the different bikes you've had on here, and you just now found 6th gear. Lol

"Let's try to heat that caliper up with some.......some heat"

You`ve got to treat your bikes better! People have been saying since like the beginning of your youtube channel. Listen to people godammit, its like you are doing it on purpuse to piss us off...

13:42 it took me a while to figure out what that sound was

At 3:48 WTF look at the chain adjuster 😂😂 screwed all the way in

Nice video man!!!! Great fix!! nice profit

As a lot of other people have commented, you do some bike maintenance things that are just wrong. Please spend some time watching some videos by qualified people before you do these jobs. You have had some real nice bikes on this channel, but quite often I turn the videos off because you say so many things that are just plain wrong. I know you are young but Please educate yourself and your channel and your bikes will benefit so much.

“Now that the rear brakes work we can try some things!” Leading to the most alkward biggest wheelie fail in KZfaq history 😂

you need to get an actual brake bleeder that pushes the fluid from the bleeder up into the reservoir and thus eliminates the air and fills the reservoir all in one shot.. it makes it so much easier to do ATV and bike brakes because the pistons arent big enough to really push alot of fluid at one time so it can take forever to fully bleed them so the brake bleeding tool makes it super fast and easy and it doesn't cost much.. the whole kit is like 30 bucks so those people saying if you always buy tools you never put money in your pocket are dumb because at some point you need the proper tools to make the job go alot faster so you can get more work done :) especially with the amount of brakes you fix

I would be embarrassed to make videos about stuff i have no clue about!

Enjoyed these 3 kx videos got me all pumped I have a 2003 kx 100 with only around 10 hours on it what a shame

Don’t rev it like that on the cold start had many motors blow up by doing that

Nice build man, bike turned out great

Certain things u just need to watch "how to vids" on and get more knowledge on before u attempt to do certain things on your channel....

Never had a 125 that didn't have 6 gears...love the color blend on the 2 greens.

Don’t listen to these guys! They all made similar mistakes trust me! My favorite channel! Why? You but, you fix , you ride! In one episode! Keep it up

👏BRAVO, another great learning moment video. 🤔I did know Kawasaki made a snow bike? Nope, outside a car, 20 mph is my top speed.

So this is basically a cold start.

i have an exactly same bike. lot of fun. i rebuilt the engine, nice job. chers

the front vork or stear bar looks crouked.also dont use water to bleed,put some brake fluid in the bottle.

You don't really know how to bleed brakes correctly. Hold the pedal down then tighten the bolt. Pump a few times and hold then crack loose... ect.

That snow shot is sick

Joe , what app do you use for your top speed runs? there a bunch out there but i like the one that you use. thanks!

Little nicky is at it againnnn.

70mph on a cold motor! That’s what’s insane

Great job bud. I would’ve came and picked it up if I had the cash for it.

Six years don't necessarily make a bike faster, it just tightens the gear ratio for faster acceleration. The only thing that makes bikes faster is if you have wide ratio gears or change sprocket sizes.

I cant wait to I see a 400ex in one these videos.

Pump the breaks til stiff with the bleeder CLOSED hold the pedal or lever crack bleeder make full stroke in one direction pumping Fluid and air out. Don’t release pressure from the pedal or lever until you have closed the bleed port

Love those years with the blue forks.

Not gonna lie dude, I got Forrest Whitaker eye watching you bleed that back brake. Brake fluid is hydroscopic, if you're going to bleed that way use brake fluid in the bottle not water. I had a 93 KX 125 it was good little bike.

Nice. I like Kawasaki's i want to get a kx 100

don't rev it when it's cold, let it warm up for a minute or 2

To properly bleed the brakes you pump up the brakes and hold it then loosen the bleeder bolt. If you pump it whiyl the bleeder is loose it just puts more air in them. Just a little tip.

Oh and you missed the chain, it's super slack lol

Enjoy every videos

Hold the throttle full when you kick, and as soon as you hear the engine start just let go, that's how I do it, the choke is fine and all but most of the time I don't even need it, only problem with doing that is when there is a problem with the bike and you end up flooding the crankshaft buuuuut if you know it's fine you can easily just go full throttle and it will start so easily :)

I know this is an old video, but dosent the coolant cap look not screwed on all the way.

You should get a 1990 kx 250! They are super nice.

A Canada spec cylinder head will fix that right up in both cold and hot wether off 98 octane.Im Australian & Ive got an 02 JP10 (only 10 made per continent) and in Japan the guys in the lab coats decided to just run Canada heads and a few other bits, runs ace in 4 to 45 degrees celcious ( apx 2-110'F) with only ratio adjustmtnts. Had her since new, chews through plugs though regardless of plug color or how its riden. Every 2 rides._. Been like that since she was born.

pump the brake until pedal is hard, hold down pedal then release fluid while still holding pedal

Your next wheeler should either be a 350 warrior or you should get another rare trick made for ice racing

Love the vids

Is that water in that bottle....holy crap dude,hydroscopic,dude try again with a bottle of break fluid

Back brakes more contaminated than an oil rig

You sure made out like a bandit on that one, if you were in Oregon you could have easily gotten 3500$ for it. Bikes here are ridiculously expensive and not only that but scarce. I want to enter your monthly contest but I'm not sure how to do it.

well thats a different way then ive ever seen to bleed a brake.......its easier to pump it up and hold it then crack your bleeder valve letting the air out until you get all fluid.. i dont know how it didnt suck water back up but hell maybe thats a way i should try lol

Man. I'm asking u this from the bottom of my heart could you please send me a seat cover for a 1994 ATC 200 please man

Nice I like it

Thats not how you bleed a brake,crack the stem open,push the brake pedal all the way down,hold it,close the bleed valve,let the brake lever come back up,repeat till you see no bubbles.thats a nice kx man

Thats Jimmy Johns fast.

it is called the master cylinder reservoir.. :)

19:44 to 19:48 What his neighbors here all the time,Also 19:44 to 19:48 the sweet sound.

Good to go, perfectly

My 95 and 99 yz 125 both have 6 speed transmissions

I would not use water in your bottle put brake fluid in it. Especially with dot4 as it absorbs moisture really bad.

Just got a cr 125 today she rips

It's 25° outside it's freezing 🤣🤣🤣 shit that's warm sun

i wouldve bought it for 1500!!! nice bike

I own a two stroke and when mine needed a top end it made that slapping noise like a piston slap that means it needs a top end and that’s what it sounded like 13:20

nice find

How can I get the gas/ speed test thing on my phone to use for my bike plz let me know

Nice dirt bike

Easily a $2000 bike right there

Good video

All I can say is WTF I can't say nothing else I'm speechless

That’s the process of degassing the breaks. A bleed is when you use a syringe and fully bleed the line

Definitely have to change at least the segments.

Sounds really lean to me but let’s go top it out lol

500$was giving it away 1200$is a steal .2500$would have been my asking

The SNOW IS ALL FROZEN😑

Pls buy 1997 or 1998 yz 80

The damage your doing not warming up properly leave the bike tick over with little revs i would never do that in that weather not even over here in britain in summer let it warm and lubricate engine fully and hes tiny piston slap

Sounds so loose like the bearings are shot hihihihih

r.i.p bike

1:14 He sounds like me!

Why do u put water in the bottle when u bled your back brakes? U dont need to

6 gears that’s crazy 😂

Kawi are known for spongy brakes

Put some deicer on that patch of ice.

One would think that he would know how to shift gears by now.

Is that a kx 5hundo

Let me bring my bike up to ride with y’all I love 2 hours away

My dad had a YZ 125 that was beating all the 250s and it did 90 mph

My yz 125 had 6 gears

Is this guy actually a good mechanic and just puts on the act for views? I just can’t believe he’s this bad at working on bikes after having so many.

Good job on the DEAL, but you've proven that a garage full of dirt bikes and ATVs does not make you a mechanic. Put box wrench in bleed valve, then attach a clean, clear 1/4" hose long enough to reach to mid-bottom of the 3/4 filled water bottle. Loosen and then lightly close bleed valve screw, while pushing on brake pedal slowly, then open bleed valve and close it up before brake pedal bottoms. Release brake pedal. Top up fluid in reservoir as req'd. Repeat until all tiny air bubbles are gone and clean fluid only comes through. The way you do it lets air back in through the valve screw threads when the brake is pumped. Also, WD40 is not brake fluid, so it should be flushed out with a good amount of fluid if you're not going to repair the stuck piston with a proper rebuild. Many dirt riders overuse and depend on the rear brake so you should fix it right. Add $50 more and sell it that way. Cold, dry weather is good - makes more 2T power.

In FL that would sell for 2000$

It's funny cos in Australia thos things are worth about $4000

Nice

That's called the Kawasaki whine