A brief look at my current collection of custom lawn mowers. Thank you all for your support! Like me on Facebook! / fearlessfront
Пікірлер: 433
@jongt6911 ай бұрын
Lightweight is good and what did I use it for it’s a lawnmower kzfaq.infoUgkxTPN04aT-Qdjr_KS3ql7ng8wnU3wwsCqk also recommend Yes it is lightweight so hence not as robust as our old one. But if you take care it does the job really well.
@hennesseygod7 жыл бұрын
you should do an updated one of these vids. I'd definitely watch it.
@Fearlessfront11 жыл бұрын
thanks for sticking around man!
@hillbillyhills72247 жыл бұрын
that bumper is sick never thought of using bmx handle bars great way to make it work and look great idea
@Customwinder16 жыл бұрын
Great work on the builds . Very impressive.
@Customsouthernarms11 жыл бұрын
I've been here through all 3 builds, can't wait to see what is next! :D
@MZEng10011 жыл бұрын
Good to see all the tractors again!
@davidabraham387310 жыл бұрын
these are some sweet tractors nice work fearless
@Lanninglongarmmowing11 жыл бұрын
I can't like this video enough fearless! Great tractors! Great video!
@Fearlessfront11 жыл бұрын
Thanks man, they are all lots of fun!
@evanhartley251011 жыл бұрын
Very cool!! Loved it! Keep up the good work!
@firmclock11 жыл бұрын
thanks for the custom pull start vid you made a while back i tried the same thing and it work very good.
@UkWheelHorseBloke10 жыл бұрын
A nice collection of machines dude :-)
@VintageOutboardMan11 жыл бұрын
great video fearless! cant wait till project #4!
@anthonyrappazzo878110 жыл бұрын
I love them. Keep up the good work
@Fearlessfront11 жыл бұрын
haha! thanks man, I'm gonna try and do more how-to's and things of that nature this winter. I wanted to spend the summer riding, instead of building like I did last summer.
@robbyboi6 жыл бұрын
nice builds, you should be proud of those!
@lifewithfamilypolanco30786 жыл бұрын
Robert S gufgnfflggh! &7&?#vkgj&)*h) #)&:j) j#b'!;
@TheRussellComer11 жыл бұрын
Excellent overview!
@EnginesandElbowGrease11 жыл бұрын
Great overview video man!
@Fearlessfront11 жыл бұрын
no, these are just my 3 main "finished" projects. and, yes.... I agree!
@abelincoln186311 жыл бұрын
Dude! Love your work!
@chondominguez69957 жыл бұрын
Great job. Very nice.
@helluvahick31857 жыл бұрын
Found an IH Cub Cadet with a Honda GX390 engine. $500 seriously thinking about and fixin it up to be a show tractor too and to rip at around 45mph. Any tips or tricks to my build?
@michaeldempsey673711 жыл бұрын
Can't wait to see what's NEXT!!
@Fearlessfront11 жыл бұрын
I haven't yet, I still use it the way it was. I do want to re-deck it though.
@jayconden82217 жыл бұрын
were can I find 77 murry and how much did the desoil engine cost
@irockjamie11 жыл бұрын
They look awesome
@Trollmaster90911 жыл бұрын
Love your go kart tractor. I wish I have something like that
@98MurrayUltra11 жыл бұрын
Rear engine drag racer! Lol nice builds! You are one helluva good fabricator
@easternelement1011 жыл бұрын
Awesome fleet! I do miss your earlier videos that seemed a bit more 'primitive' and had more 'how-to's', but you're on to bigger and better things! And I understand that. Keep up the good work, you've got anyone else's tractor on here blown out of the water...and you can multiply that by 3 with all your rigs!
@waimeagavin80810 жыл бұрын
You should put a small turbo on the sears I love that tractor
@Creeperboy0995 жыл бұрын
waimeagavin808 I don’t think that would be good for muddy conditions...
@B3NICKY229 жыл бұрын
But do they mow the lawn?
@eddienewingham11234 жыл бұрын
Well, THATS a silly question! We dont like mowing the grass. So we fix things until they wont! These are absolutely, the finest examples of high quality yard equipment.
@alecvip75623 жыл бұрын
You guys really responded to a 5 year old comment
@NotHellboy573 жыл бұрын
i love how the people who replied to this dont understand that this is a joke...
@jameslawnmowerrepair3 жыл бұрын
@Bro wake up It’s 2006 its a joke Bro wake up its 2021 lol
@Fearlessfront11 жыл бұрын
Haha! me too! I wish I had more space to ride the go kart though.
@mowermudderman668110 жыл бұрын
Dang! That suburban mower is sweet! I'm running a 12.5 ic Briggs motor, what would a good pulley ratio be for mower mudding??
@Tanner3065711 жыл бұрын
omg that sears is just badass!!
@albertjumappe207510 жыл бұрын
I hope you can answer me because i think you have a lot of experience with lawn mowers ;) my currently wheels on my lawn mower are 16x7.50-8. do you think i can put 20x10-8 wheels on it ? ( i have anough place )
@nickdebeeld92827 жыл бұрын
How did u fab the pulley on too the mower I want to do something like that bec i don't have money for battery and I don't like to carry a jump box around every where
@DieselPower50510 жыл бұрын
Cool that gives me hope to build one because right now im not sure that I can liftit but I know I can do most of that other stuff you did in your previous video. Where I live in Florida deckless lawn mowers are a dime a dozen. I think this is definatly going to be a project afterfootball season ends. Love your vids man keep them coming!
@Fearlessfront11 жыл бұрын
I might do that once it's had time to break in
@Fearlessfront11 жыл бұрын
Thanks T-man!
@geckobros42429 жыл бұрын
Great vid :) what would your surjest doing to a Westwood tractor to make it faster and more of road
@chrisbunch1310 жыл бұрын
That Parklane is badass, man.
@acrophobiar18 жыл бұрын
i have a 2011 lt2000 how do i make it faster it has a 21hp b&s hydrostatic trans my 86 wheel horse with a 12hp kohler runs circles around it?
@Fearlessfront11 жыл бұрын
I haven't even started to mess with that one yet
@NYRAPTOR611 жыл бұрын
great vid!!!!
@joshuamichaud90387 жыл бұрын
Where did you find your tires and rims
@2jeffs110 жыл бұрын
Excellent video tour. New here. You created some nice creations. Your off road video's spare no mercy on the equipment. It's fun to create custom rides & then test them to the limits! ( That happens here too.) Nice job at producing video's too, good lighting, not all shaky & they flow - yada yada! Had to give you a little of my time - It's evident you invest a ton of your time in this.
@Fearlessfront11 жыл бұрын
you're very welcome
@Fearlessfront11 жыл бұрын
it has a 9t on the output of the tav2, and a 36t on the axle
@yerfbogger11 жыл бұрын
Thanks, one more thing, how did you beef up your steering to be able to take a beating? Mine has got all bent out shape? Any ideas to beef it up. It's. Murray 11/36 from the 80s and its like a 2 piece thing for the piece in the front and yet are splitting apart from offloading.
@jameshutcheson76779 жыл бұрын
I've been with you throw it all an I am now in the process of building my own mud mower you have taught me a hell of a lot of stuff an I would love to see some new stuff man an I could use some help with my mud mower as well hit me back with some news buddy
@Fearlessfront10 жыл бұрын
as large as you want as long as you buy them for 8" rims
@TylerVizcaino10 жыл бұрын
to make a riding mower fast do you switch the back pulley to a small one or would you switch the frount one? and what would you sugest if i want it to go really fast?
@austinmorris84558 жыл бұрын
We put a recliner on a tractor frame with and 18 horse v twin and smaller pulley on the transmission and bigger pulley on the motor. It was pretty sweet but id like to see how badass of one you can build!
@dtraywick2711 жыл бұрын
Nice builds
@Fearlessfront11 жыл бұрын
The craftsman crawler in sitting in the garage, and the lifted is at the mud king's house.
@Fearlessfront11 жыл бұрын
I still have it. never finished it
@joeshmo24735 жыл бұрын
The show tractor is SICK. I got my hands on a craftsman 2 that had a briggs 12.5 flathead I used to swap onto a pull behind that had a blown up motor and I'm gonna use the craftsman frame to build a 420cc predator stage 2 on it with a torque converter and racing go kart wheels and rims and slam it to 2 inches off the ground for lawnmower racing. Its gonna be sick
@EgideDostie39 жыл бұрын
How were you able to register your lawn mower for the four wheeler
@demolitioncam65196 жыл бұрын
What would I have to do so that if I took my lawnmower off Roading in water it won’t breathe it in and mess it up
@yerfbogger11 жыл бұрын
I've got a question for you, my starter solenoid has gone out on my old Murray 11/36 off road tractor and I was wondering if there is any way to bypass the solenoid and still be able to use the key switch to start it and cut it off. I know about the way to bypass it with jumper cables but the. You can't use the key and you have to carry cables. Just wondering if you had any ideas.
@nicklewis98110 жыл бұрын
the sears is absolutley badass
@TheAussieStig309 жыл бұрын
Hey man I dunno how old the video is but can you tell me where the round LED lights came from? I'd like some for my Craftsman.
@rex4x411 жыл бұрын
hows the craftsman crawler ?
@ethancollins60953 жыл бұрын
How do you put the gas pedal on it and how did you get the exhaust really tall
@Fearlessfront11 жыл бұрын
yea, can't wait to ride it again now that it's been tweaked a bit
@matnew198442011 жыл бұрын
sweet toys i couldnt just pick one id want all of them
@12gageracing568 жыл бұрын
+FearlessFront good fore you man you and my bro inspired me to make on so i did locking the trans and poly swap is next
@matthewscott798510 жыл бұрын
Hey fearless I have a 70s sears with a 10 hp that runs great I was wondering if i could switch the back pully to the front?? My back pully is huge about the size of a dinner plate any suggestions?? Thanks
@timtravasos27425 жыл бұрын
Very creative
@frankwilliams76736 жыл бұрын
Will you go over your pulley set up? I switched to a 6" engine pulley on the same engine you have with a Kevlar belt but can't figure out why the clutch won't stop the belt. Belt has plenty of slack.
@joeshmo24735 жыл бұрын
Belt might be too thick. Has to be the same thickness belt that was originally on it. Probably needs a 1/2 inch wide belt. 5/8 inch wide or bigger wont disengage
@EnginesandElbowGrease11 жыл бұрын
Thanks!
@Midwestfabrication11 жыл бұрын
where did you get the orange hood for the racing one?
@Fearlessfront10 жыл бұрын
I didnt mod the murray steering at all, just the steering on the sears
@stuwkowalski10 жыл бұрын
Your tractors are awesome man! sub'd for sure! would LOOOOVE to see you put a CR500 engine into your cart tractor!
@PaulsPlace11 жыл бұрын
Dude your awesome
@Fearlessfront11 жыл бұрын
I would love to mess around with a shaft drive! no slippage!
@jco52544 жыл бұрын
This is awesome
@loganburk50979 жыл бұрын
do you have any old exhaust pipe that I can by and can you thing a bout a 4 wheel drive
@jagky11 жыл бұрын
Sweet tractors,
@DAR1016211 жыл бұрын
Im looking at an old 3 wheeler its just missing the head of the motor how much do you think it would cost to fix it tlc included
@strangemowers278810 жыл бұрын
What happend to the lifted mudding mower?
@heyyo373711 жыл бұрын
I have a mower with a hydrostatic transaxle and was wondering if that type of transmission can be used for an off-road mower
@RCGUY13110 жыл бұрын
Hey fearless im new to mower romping and im looking to get my first mower! any recommendations? low budget i dont want to pour to much money into it since it is my first so please recommend a good mower to start off thanks
@itsasadbunny11 жыл бұрын
How do u actually build a go kart using an old lawn mower ans some wheels and things and what specific things would you need?
@isaacnolz24969 жыл бұрын
I want to make a mudding lawn mower that goes a good 20mph+. It needs to go faster than 5 MPH. What do you recommend, Hydrostatic-Manuel?? How do you make your mowers so fast?? Would a Craftsman 12HP 6-speed manual work?? Could I make it faster somehow. What kind of mower should I buy?? I have a Hyrostatic now but it is about 40 years old. I NEED HELP.
@georgejordan95169 жыл бұрын
manual with swapped pullies.
@countrylife60726 жыл бұрын
I’d like to see an updated video of this after the Murray is rebuilt
@Fearlessfront11 жыл бұрын
it can be used, you just can't pulley swap it to make it faster
@TheChickeneer11 жыл бұрын
Can you put on larger tires on smaller rims? For example I have a rim with 16-7.50-8 tires on it. How much larger tires can I get that will still fit the rims?
@Fearlessfront10 жыл бұрын
The murray, for sure!
@lukehanrahan588710 жыл бұрын
hey im building a eurostyled westwood and i have it already geared up with several pulleys. i was just wondering what is the fastest peerless gearbox, im wondering which model gearbox is best and maybe the ratios if you could help . thanks
@Fearlessfront10 жыл бұрын
I would go with a race prepped peerless 700 series 5 speed gearbox. That would be your best bet. Ratio's will depend on your pulley ratios, and tire/wheel size.
@codydavis59510 жыл бұрын
you should do a night time mud bog. like a party lol
@mexicanjesus46984 жыл бұрын
what is the drive train setup on the newest one?
@Fearlessfront11 жыл бұрын
Currently in the corner of my shop in pieces.
@_boom_your_dead_976910 жыл бұрын
hey fearless i want to lock the differintial on my mower but im afraid its gonna snap when i turn should i worry about that?
@Fearlessfront10 жыл бұрын
both of mine are locked, and have been for a while. If there welded properly, and you size your tires, and pulley swap accordingly, you should be fine. Just look at what I put the murray though!
@BigMacD144210 жыл бұрын
I am building a racing mower like yours but I will use a Honda clone. Is there any way to make a turbocharger for it?
@sqhunter6511 жыл бұрын
very nice
@MrJpshaw260110 жыл бұрын
Did you do a pulley swap on the sears?
@JunkworksGarage10 жыл бұрын
just an idea an off road trailer would be cool for some weekend trips off road
@christainresenbeck754511 жыл бұрын
Hey fearless what gears are you running on your racing mower?