3 Experiment Comparing The Strength: Baking Soda, Cement, Charcoal, Styrofoam

Рет қаралды 1,917,855

5 ай бұрын

Welcome to Gaus DIY channel, this video is about the experiment comparing the strength of Baking Soda, Cement, Charcoal, Styrofoam when combined with Super Glue, through this video we will know which type is best for repairing plastic, wood and metal items.
Then practical application in repairing broken plastic items, car bumpers, and repairing scissors right at home.
I hope you enjoy watching my video!
► Subscribe: youtube.com/@GausDIY?sub_confirmation=1
On Gaus DIY channel, you can learn various inventions, tips, science projects, crafts idea and DIYs teaching how to reuse or recycle.
© Copyright by Gaus DIY ☞ Do not Reup
#superglue #diyprojects #plastic #tips #diy #recovery

Пікірлер: 809

@GausDIY 4 ай бұрын

I didn't know that the results were obscured, I would like to add the results as follows: Baking Soda - Styrofoam - Charcoal - Cement Test 1: Top1 - Top 4 - Top 3 - Top2 Test 2: Top1 - Top 3 - Top 4 - Top2 Test 3: Top3 - Top 4 - Top 1 - Top2 I hope you enjoy watching my video! Thank you so much!

@1islam1 4 ай бұрын

⚠️ God has said in the Quran: 🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 ) 🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 ) 🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 ) 🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 ) 🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 ) ⚠️ Quran

@dougsorensen7594 4 ай бұрын

This is not the forum for your crap! @@1islam1

@crossmaster27 4 ай бұрын

@@1islam1 el coran son palabras vacias y no te das cuenta de lo segado que estas busca Yeshua dijo: Yo soy el camino, y la verdad, y la vida; nadie viene al Padre, sino por mí. Juan 14:6

@1islam1 4 ай бұрын

@@crossmaster27.. { Do you not know that the wicked will not inherit the kingdom of God? Do not be deceived: Neither the sexually immoral nor idolaters nor adulterers nor male prostitutes nor homosexual offenders nor thieves nor the greedy nor drunkards nor slanderers nor swindlers will inherit the kingdom of God } (1 Corinthians 6:9-10)

@1islam1 4 ай бұрын

@@crossmaster27 ⚠️ Jesus was a servant of God ⚠️ { The God of Abraham, Isaac and Jacob, the God of our fathers, has glorified his servant Jesus.} (Acts 3:13). 📚 The Bible Denies the Divinity of Jesus

@Walkercolt1 4 ай бұрын

To be accurate, you should use EXACTLY the same amount of glue with each bonding agent. Having been a plastic modeler for 60 years, and having been using cyanoacrylate glue since it's introduction as Eastman 910 in the very late 1960's, I could have told you, baking soda (or sodium carbonate, "washing soda") would be BY FAR the superior bonding agent to ANY material bond. The Eastman Chemicals "poop sheet" on Eastman 910 (there are and entire SERIES of Eastman "900" "super-glues") plainly states that alkaline agents promote the strongest bonds. The first was made to bond the wing spars of B-52's in place! Yes, the wings of B-52's are GLUED-ON! My late Daddy machined the two plates of the wing attachments from high grade aluminum. They form a hinge that allows the wing to move over 12 feet vertically from at rest to full load in flight.

@loiswallace3334 4 ай бұрын

Baking soda, chemical name - sodium bicarbonate. Washing soda, chemical name - sodium carbonate.

@mick1turner 4 ай бұрын

Thank you. I learn more from comments than from the video.

@fromtheflightdeck252 4 ай бұрын

So what's your point? He used bicarbonate of soda for these tests not caustic soda....caustic soda is very dangerous.

@dougsorensen7594 4 ай бұрын

Interesting information. Thank You.

@zeuso.1947 4 ай бұрын

@@fromtheflightdeck252 Caustic soda was never mentioned.

@MrChangchichris 4 ай бұрын

Recall test result: (1) Wood-to-metal baking soda 5.505 kg cement 4.425 kg styroform 3.2 kg charcoal 4.095 kg (2) Plastic-to-plastic: baking soda 0.785 kg cement 0.65 kg styroform 0.365 kg charcoal 0.35 kg (3) Wood-to-wood: baking soda 5.445 kg cement 6.8 kg styroform 3.16 kg charcoal 8.245 kg

@cgl4572 3 ай бұрын

Thanks

@user-rm6tn2ue7e Ай бұрын

Thanks for the experiments. Do you have any comparison with lead? 🙏

@Eu_Sim Ай бұрын

Thank you my love

@mimmodb3588 Ай бұрын

Scusa la curiosità, hai provato legno legno con segatura e super colla ? Che ne pensate

@dalgombez1076 Ай бұрын

i think cement is the best, because more stable than other

@generaclesdey4622 4 ай бұрын

There were so many UNCONTROLLED variables that the data is useless. The positioning hook of the scale was erratic, the amount of each of the powders used, the amount of the glue, the size of the surfaces, the temperatures, etc.

@mirlorojo3348 3 ай бұрын

How many hours did he let it dry?

@user-wv1pj6wh4h 2 ай бұрын

poeple dont knbow how to test things

@VictorBreazzeal 2 ай бұрын

Yea hook positioning made this data not useful it was a good try tho

@kenxchoi775 2 ай бұрын

same thought, best result should be hang up, and put the weight at the end, and pull it via gravity

@nocomment3866 29 күн бұрын

That's how research is made now. The number of views and likes shows if the result was a success

@charlescollier7217 4 ай бұрын

Interesting experiments, but there were a few things that make the results difficult to interpret. Most have to do with standardization within each experiemental condition. For example, the actual amount of gule applied and the gapping between surfaces. The most glaring though, was the inconsistent placement of wood and zip ties on the strength test. A force applied increases inproportion to the distance from the fulcrum. In effect, the further away from the fulcrum you placed the zip ties, the less measured force it would take to break the joint. I would recommend repeating these experiements, but standardizing everything.

@randyaivaz3356 4 ай бұрын

Crazy Glue/Baking Soda Great for Guitar Nut Filed to Low

@pyroguitars1296 4 ай бұрын

@randyaivaz3356 Thanks for that. That'll solve a problem for me.☺️ Need to fix an aluminium nut too. Maybe cement for the colour match.🤔

@jonhymix80 3 ай бұрын

In Portugal we call that physics, and is probabily on the levers chapter. Very good point indeed.

@519ma3mpath 4 ай бұрын

You should've considered to include a 5th item which is just a super glue so we can differentiate how strong it is without mixing it to baking soda, Styrofoam, charcoal, and cement.

@johniwanaga3517 4 ай бұрын

Just from my experience, it seems the baking soda is great for hard white plastic repairs. For more flexible plastic, use the Styrofoam. For black plastic, use the charcoal, but it works better when finely powdered like cigarette ash. Not sure if cement would be the best for bonding ceramic and stone, but it wouldn't surprise me. Super glue is acrilate that undergoes polymerization in the presence of water. I have seen acrylics (plexiglass) melted with acetone , which makes a hellava glue in its own right, but I have yet to see powdered acrylic and superglue done. Please make that video experiment.

@NazriB 3 ай бұрын

Lies again? Batman Superman Big Shot

@JoaoFerreira-mf6fk 2 ай бұрын

habe probiert. plexiglass und acetone, hat geklappt

@SuperPhunThyme9 Ай бұрын

Mix an alkaline material in with each of those regardless for best strength. Need to get that pH above 8 or so

@param888 Ай бұрын

you don't need any powder, just use a pencil to color black the surface then use couple of drop. that's it you are done. you need to use file on very smooth surface as you can not draw from pencil on smooth surface such as glass, use little sanding or filing then rub pencil then stick.

@elektro3000 4 ай бұрын

Very interesting experiments. I would like to see these experiments conducted with fibers: Glass fiber (from insulation), sawdust, 0000 steel wool, and some kind of plastic fibers.

@davidhorizon8401 4 ай бұрын

I love the testing. I agree with everyone that a more controlled test, same amount of stuff, scale the exact same distance from the joint would make the test more accurate. But it is still interesting.

@junkvista61 4 ай бұрын

I agree, the leverage of distance from repair point to where force applied could make results change.

@deadby15 4 ай бұрын

The method is not very meticulous, but the conclusion that Baking Soda is quite effective still holds, seemingly.

@tomassalvador1142 4 ай бұрын

Exacto! El torque depende del largo de la palanca.

@markcleaver6573 Ай бұрын

THANK YOU Gaus DIY : Dislike crabby comments. Like educational comments that respect the producer of the video.

@votingcitizen 4 ай бұрын

You should have measured out the amount of additive/accelerant to ensure a fair comparison. On the plastic-to-plastic, you needed to make the distance from the vise jaws to the joint the same for all tests, as well as the distance from the joint to the pulling force. variations of those lengths will have a significant effect on the force applied.

@GausDIY 4 ай бұрын

I will note this 👍👍

@a.enriquehernandez5542 4 ай бұрын

Cierto, además del tiempo de secado, inicia la prueba al último que le coloca el superpegamento

@timjohnun4297 4 ай бұрын

Dude, this experiment is to work out which dodgy repair is the strongest- it’s hardly gonna need NASA accuracy 😅

@PabloGuillermo 4 ай бұрын

@@timjohnun4297Bueno entonces para ti es igual pegar con moco! 😂

@RO8s 4 ай бұрын

@@GausDIY The Law of Levers! Force = pressure x distance... Thus distance must be exactly equal for all tests.

@dedalo1RAMC 4 ай бұрын

The experiment has three problems: 1.- Time between the glue and the experiment. For example: cement has a time to toughen. If you last 24 jours between the glue and the experiment it is better 2.- You have to take the same distance between the glue and the site of the force, as you are doing an experiment of momentum force this is very different if you are 5 cm or 6 cm from the glue 3.- The distance of the two pieces of material must be the same. Is diffenrent if it brokes in the connection of materials or if it brokes in teh middle of the glue And this experiment only is at flexion.... if you want to know the glue power you have to do it at longitudinal force.

@rbhe357 4 ай бұрын

Cement doesn't react with glue. The cement is just a filler matrix.

@dedalo1RAMC 4 ай бұрын

@@rbhe357 Cement reacts with the humidity of the atmosphere. As cianocrilate is no waterproof, the cement wil be reacting days... and is going to be harder as it passes. But you have to see it, because cement with the reaction change its dimension and is possible that it makes micro-cracks that cracks the union

@pa8978 4 ай бұрын

The measurement device should always be installed at the exact distance from the glued area at all test items. This was not the case. A small difference give already a big failure in accuracy.

@khallody2675 3 ай бұрын

There are one more mistake The charcoal is not in powder form compared to other materials Add that in your list It should be a great feedback for the experiment

@veredan2009 3 ай бұрын

Thank you for this. This is a bit helpful. However, it would be more accurate if you anchor the meter same exact point for all materials. Because even a slight difference in the anchoring of the weighing scale hook along the length of the pieces can spell a big difference (e.g. the closer to the glued joint, the harder it is to break, the farther from the joint, the easier it is to break; this is the principle of the lever). Another minor point is the amount of material used for the joints. It should be same weight in grams for all materials being compared, and exact same amount of super glue. Because for example, if you put a little bit more cement than baking soda, then obviously there will be a strength difference; same with amount of super glue.

@SP-io7lj 2 ай бұрын

Some people are ridiculous in these comments! LMAO! This person wasn't doing an experiment for the FBI! They were testing which of the materials would work the best with in your home when you need to make a quick repair! We aren't talking about rocket science experiments here. Some of your comments want the same amount of glue, but if one product needs more glue for a connection, then that's OK. The issue is which material will generally work the best and these tests show that. If you feel you can do better, then create your own channel and do some experiments! Otherwise, RELAX!

@josephtucciarone6878 4 ай бұрын

Thank you for this test. I never knew which one to use.

@wb33 4 ай бұрын

you still don't. See comments above

@goldreverre 4 ай бұрын

This is OK for getting a general impression, but for a proper analysis of material strength and bonding ability, you'd need to do separate shear test and tension tests that eliminated factors of inconsistency. A tension test being two surfaces glued end-to-end and pull apart at 90 degrees from the glue plane. Shear is glueing two surfaces in an overlap manner and pulling it apart along the same plane as the bonded surface.

@sonusancti Ай бұрын

Great video!

@THOMMGB 4 ай бұрын

Thanks for doing this test. For me, I think baking soda is the way to go. It's easy to find and cheap. I don't have a clue where I would find a small amount of cement so it's just as well....

@GausDIY 4 ай бұрын

thank you so much

@user-zl7sq3bj6q 4 ай бұрын

I enjoyed the video, but had a few after thoughts about application. I wonder about durability under different conditions such as excessive heat, moisture or repeated cycles of extreme temperature changes. I imagine most of the above examples would work great to reattach a fallen rear view mirror on your windshield, but couldn't function on a muffler, besides the weight, it also gets exposed to the weather conditions repeated shocks from bumps. Another video on that might be interesting too.

@JOE_STARK 4 ай бұрын

Maybe you should try fine salt, baking soda can also be found in different granules and I think the finest is the one that achieves the best results.

@jonoroberto435 4 ай бұрын

Eksperimen ini sangat membantu sy untuk memilih bahan yg cocok, saat perbaikan berbagai barang👍👍👍

@scromz95 4 ай бұрын

Hey! great work, the idea is interesting, I just think you need a little break of about 24 hours before applying force to make the most of the capacity of each glue.

@GausDIY 4 ай бұрын

Thank you

@balajisubbaiah 3 ай бұрын

Should have tried out with sawdust as well. I used sawdust + superglue to stick a reverse threaded nut to it's Bakelite (or similar material) body, since I was unable to procure a replacement. It worked absolutely well, being exposed to super heated steam. Of course the joint did give up, but it did last far more than what I expected it would. Actually, the nut is still stuck to the compound that I created. The entire block became unstuck from the Bakelite body. So, metal + sawdust + superglue works well.

@Shaun-vy9vi 3 ай бұрын

Ive always heard that you cut the baking soda with charcoal (graphite) and apply in thin layers with the glue. Ive used this technique to mend broken plastic in laptops where the hinge for the screen tightened and broke the plastic mounts. Works amazingly well

@willthecat163 3 ай бұрын

Charcoal is not graphite. They are different allotropes of carbon. (You can get graphite from a pencil... and, yes, it's not the wooden part.)

@CB27 3 ай бұрын

What proportions do you use? How long does the repair last?

@stefanmeyers2808 3 ай бұрын

I don't see graphite and charcoal as being the same product.

@Rob337_aka_CancelProof 4 ай бұрын

It works very well with ashes and it works good with a magic eraser I had that was falling apart and instead of throwing it away I used it super glue to glue something plastic and it works great for that Mr Clean Magic Eraser is a melamine foam and I think it's almost ideal for this type of application

@humashad1543 Ай бұрын

I like working

@jrespect4u 13 сағат бұрын

I read in a similar video that the strongest combination for super glue is baking soda. Apparently this combination was so strong, it was used for holding together parts of the wing on old war planes. When you mix super glue and baking soda, it accelerates the curing process. Chemically, the bicarbonate molecules in baking soda react with cyanoacrylate to create a reactive ion that more easily bonds with other cyanoacrylate molecules...so yes, your experiment result was accurate👍

@rayrooney4656 4 ай бұрын

Very imprecise methods. Just the placement of the hook on the samples can throw off the readings.

@duvanda13 3 ай бұрын

Mil gracias por ese experimento. Me ahorro el ensayo. Ahora tengo mejor apreciación de que utilizar en mis reparaciones.

@duvanda13 3 ай бұрын

Falto con algodón y con papel o cartón.

@reubenha1 4 ай бұрын

Great job! Now I know which to use. Just a sudden thought, how about graphite from pencils?

@GausDIY 4 ай бұрын

Yes, I will try it. thank you!

@grpecanha83 4 ай бұрын

Controlling the distance from the joint is essencial…Directly affects the momentum to which each material is exposed. Nevertheless, great experiment to have macro conclusions. Perhaps a finest one comparing bkng soda to cement.

@ruidadgmailcanada8508 4 ай бұрын

Nice basic comparison, good enough for a clear winner. 😊 Easy to pick baking soda for price/performance and it’s easy to find. Thanks for the demonstration.

@DIYTechTrends 4 ай бұрын

Great video! Thanks for share ❤🎉

@hesido 4 ай бұрын

The pulls should have been made from exact distances. Thanks for the demos...

@sweetdominicanbeauty 4 ай бұрын

I think also that the baking soda was the first applied and also the last tried. It had more time to set or cure than the last one.

@bjornstromberg7975 4 ай бұрын

Very nice (but not accurate) test, gave a hint of where and when to use what. Would be nice to se a test of glueing two diffenet materials together (i.e. wood to metal, plastic to metal, etc.)

@GausDIY 4 ай бұрын

Thank you, I will make another video that is more accurate and better ❤️❤️

@ManuelValdesRojas-nn6lm Ай бұрын

La mejor opción se obtiene mezclando tres elementos: Bicarbonato, Carbón y Cianocrilato. Hasta dónde he probado nada la ha superado

@vdfritzz 22 күн бұрын

cotton works great too

@Phandiw 20 күн бұрын

For next time: 1: "Control": use pure super glue for one sample 2: Variable to Standardise: Distance between items to be glued 3: Variable to Standardise: Distance from joint at which force is applied 4: Variable to Standardise: Mass or Volume of Glue utilised 5: Variable to Standardise: Mass or Volume of non-glue component utilised In short, (i) compare all to just glue, and (ii) TRY to make sure that the non-glue component is the only thing changed.

@SS-pi2yi 4 ай бұрын

Repeat the tests, but this time paying more attention to precise equal amounts in gr. or mg.., plus ensuring the same distance point where pulling force is applied. Then we see if same results. Great first attempt nonetheless - thanks!

@yuripaganucci4324 4 ай бұрын

Grazie per queste prove chiarificatrici.

@victoralexandervasquezauza3058 3 ай бұрын

Excelente información Muchas gracias Lo pondré en práctica

@RealStuff001 4 ай бұрын

Plesae try again by placing the spring balance a measured fixed distance from the repair. Lever effect has a massive effect on the reading.

@seanparsons8987 4 ай бұрын

Good effort. Results can be skewed by so many factors mentioned in the other comments as to question the results - which i dont understand. Which is top 1, top 2, etc?

@kvpramodkumar 4 ай бұрын

should have added saw dust also in the test items cos saw dust also makes up a very strong bonding. Do try saw dust in your next experimet

@chrisbraswell8864 4 ай бұрын

I uses saw dust to strengthen joints on RC aircraft, it will break somewhere else than where sawdust was used.

@frycu1004 4 ай бұрын

Dziękuję za test👍🇵🇱

@stanlindert6332 4 ай бұрын

Cool test! I know that luthiers use superglue and baking soda to repair bone and plastic on stringed instruments

@mikearmstrong4831 3 ай бұрын

I appreciate the test but another flaw, with considerable impact on the results, is the distance you placed the strength meter hook from the glued portion. You should have measured the distance to be sure there was consistant leverage applied.

@DaveC_2024 4 ай бұрын

Thank you! Excelent job!!

@PaulK390S90V 3 ай бұрын

One thing I noticed on the two pieces of metal bars adhered together that may have been better. If you would have flipped the mounded piles of the powder on to face away from you when pulling it would have better judged the strength. Unless you were judging solely where it contacted the 90 degree face between the metal bars. It would be like using tape and expecting it to hold up with only tape on one side and pulling with the tape facing you. If that makes any sense lol. I know these arent scientific, and I really enjoy them! Or maybe flipped the bars and put the powder on both sides, which is what you would probably do in the real world assuming you could. Cool videos! Subbed

@JOE_STARK 4 ай бұрын

I think that each joint should wait at least between 8 and 24 hours for drying to have more conclusive results. It seems to me that many of the tests have not even passed half an hour after applying and that is decisive. On the channel "El Angelito" he tests a ring with cyanoacrylate and sodium bicarbonate, and with a crane he is able to lift a washing machine and then a platform with more than 200 kilos. And stretching the joint transversally is not the same as stretching it longitudinally. Good! You already have material for another video.

@GausDIY 4 ай бұрын

thank you, I will learn and do it in another video

@daramiana 4 ай бұрын

The best test,,thank you very much.

@hikariizuki1693 4 ай бұрын

I usually use powdered coffee since it reacts nicely with the glue and is easily available at home

@twinwankel 5 ай бұрын

Thanks for the video. I like styrofoam since it's not a powder, it can be controlled better. However, if you need strength, Baking Soda is best for most applications. Cement seems to good for all applications. However it's a coarse powder. Harder to sand down smooth. Of course you could be more scientific by carefully marking and applying your force at specific points. I noticed there was some variability in where you applied the load. I don't think it would change the relative rankings.

@GausDIY 5 ай бұрын

Thank you for your comment, Have a nice day!

@josephtucciarone6878 4 ай бұрын

That is what I noticed. Especially in the last test. The Cement would have a higher scale load, but probably the same ranking for all.

@samadamms3432 4 ай бұрын

@twinwankel - Since cement is coarse, I wonder if unsanded grout would be better?

@stoner27th Ай бұрын

The closer you pull to the connection the harder it gets. The further it becomes easier. Leverage.

@MichaelHarrisIreland 4 ай бұрын

Great video. Thanks for taking the time.

@fosfororojo2065 4 ай бұрын

Probé con plástico roto. El bicarbonato se comporta muy bien. Esperar más tiempo para mejorar la reacción y el endurecimiento

@lasseabonieda6855 4 ай бұрын

The leverage is always different. You cannot compare the results. would be curious if using only superglue would be better.

@Nilbyte 3 ай бұрын

To be more precise, you would have to exert the force at the same point on each lever, that is, at the same distance from the base to the point where the force is exerted.

@CreativePassion88 4 ай бұрын

Good Idea

@GausDIY 4 ай бұрын

Thank you, Merry Christmas 🎄🎄🎅

@user-fr1nh1jm3o 15 күн бұрын

Excellente vidéo, j'ai moi même fais l'expérience avec de la limaille de fer très fine et le résultat très bon pour faire du comblage de manque sur des pièces de petites mécaniques.

@danielbasetone1467 4 ай бұрын

You hook from the right, and then from the left, and back and forth not an even comparison, along with uneven weighted amounts of substances ..details make all the difference

@Kapparie 3 ай бұрын

The momentum on the base of the screw is determined by the Pulling force multiplied by the length of the arm. And the arm is the hight of the mountingpoint of the hook. The higher the hook, the greater the momentum at te base of the screw.

@CagedMcChildren 3 ай бұрын

I'm curious how well sawdust and wood ash would do (separately). I thought of the mythbusters' ice boat, when they added sawdust to the ice to give it more strength.

@user-jz5fr7wj3l 4 ай бұрын

感謝你做這個實驗！個人有一些疑問想詢問你？問題一：請問木炭是市面販售木炭再加工成為木炭粉末？還是直接使用雷射印表機的補充碳粉（不是碳粉匣）是指充填碳粉匣的外售補充碳粉？問題二：我在我車子後車燈殼破裂時使用小蘇打粉加膠水，因為操作不慎導致後來粉末汙染燈殼內部，於是靈機一動（原本單純遮蓋使用）使用3M透氣紙膠帶（醫療用）加上瞬間膠水，感覺強度比單純小蘇打粉末加上膠水強，也比較好施工！

@user-wh9eh3lr4p 4 ай бұрын

這實驗差距太小變數極多沒有意義光是你怎麼固定與拉動的螺絲力矩每次測都是差距極大

@brozobmwmex 4 ай бұрын

Thanks for the info, very useful.

@dragan3290 4 ай бұрын

Excellent video ❤. Cheers from Australia

@donkeypunchout 4 ай бұрын

I have a fog light panel cover that was destroyed and it broke the brackets holding it into the bumper so the only thing holding it in place now is super glue and baking soda and it has been 6 months now and it has not moved yet..I only put it in the two places where the bracket was so I will testify that baking soda and super glue works miracles..

@ideacreativerudi 4 ай бұрын

Thank you for sharing your experiment, friend.

@bjweaver3333 4 ай бұрын

This is great. Thank you. I subscribed and liked. Look forward to more.

@GausDIY 4 ай бұрын

Thank you, Have a nice day :)

@BGittins1 3 ай бұрын

Nice But needed more accurate , repeatable location of pulling point / turning moment

@gorilladisco9108 Ай бұрын

You need to use a specific point of stress at the test objects. The amount of force exerted to the glued part will differ greatly depending on where you pull it (near or far away from the glued part).

@batlin 2 ай бұрын

Placing the hook in different positions, and anchoring the wood in the vice at varying distances from the joint, meant a totally different amount of leverage and stress in every condition. Sometimes a high torsion force was applied, and other times it was more of a shear force than torsion. This means we can't learn much from the tests.

@filipegaspar3572 4 ай бұрын

For proper analysis and comparison you should have a plain cyanoacrilate glue (without aditives)

@xcoder1122 28 күн бұрын

In my experience, it doesn't matter what you use as long as super glue sticks to it but the more fine grained it is, the better the result. If have fine grained plastic powder and it works very well.

@nix0849 10 күн бұрын

有り難い検証動画は出来れば最後に表にまとめて一覧結果を作って頂きたい！一目瞭然で分かり易いから！

@enesyavuz7518 4 ай бұрын

*Since baking soda is in powder form, the particles cannot hold together and form bonds. Naturally, since the glued carbonate is hard, it breaks after a certain resistance is applied. It may be a good idea to add glass fiber powder or carbon fiber powder to the baking soda to create a bond between the baking soda particles and provide strength.💡*

@Claudg2008 3 ай бұрын

Never heard of this before, but it should work! I have used flox (chopped cotton microfibers) to add more strength to bondings, with excellent results.

@AN-kg4ei 3 ай бұрын

sodium bicarb and iso glue catalyzes like fiberglass and resin. It gets extremely hot and ever since hearing about it maybe a decade ago, it's my go-to for rock solid repairs. I don't know if any of the other tests have strong chemical reactions but the baking soda is a game changer.

@dandaniel439 15 күн бұрын

@@AN-kg4ei I had to look this up but..... sodium bicarbonate = baking soda.

@SurferBobbyLew 3 ай бұрын

also do you know much about leverage and moments? You need to precisely apply force at same distance spot otherwise closer or further away will drastically change values.

@marcelopampalone7656 4 ай бұрын

Excelente forma de pruebas

@giovannino1962 4 ай бұрын

Molto interessante, come ogni altra puntata che hai proposto. Anch'io sto diventando un appassionato della supercolla. Ieri sera ho stratificato dei fogliolini di carta igienica, che dare spessore ad un incastro che non era più stabile. Ottimo risultato. Sono anni che uso la supercolla, ma finché non ho visto i tuoi video, in modo del tutto sbagliato. Grazie e Buon Natale.

@ljprep6250 3 ай бұрын

Baking soda is great, but wood knows its own. Charcoal was the strongest with wood alone. Interesting!

@GausDIY 3 ай бұрын

Thank you!

@dashrwahd9535 4 ай бұрын

Thank you for this test.👍

@GausDIY 4 ай бұрын

Welcome!

@fuffoon 4 ай бұрын

I have been burning my eyes and gluing my fingers together with cyano and baking soda for 45 years. Sometimes I would lick the joining surface too. That helps also. Once or thrice I managed to glue a stick to my tongue. No joke.

@fromtheflightdeck252 4 ай бұрын

Joe, it's you? No joke?

@stefanmeyers2808 3 ай бұрын

When you went to the hospital did the doctor say "stick your tongue out"?

@paulwyleciol3459 4 ай бұрын

well done: place the result in the last second of the video, so we can not see it under the "next video suggestions". bravo! 😢

@fernandomeza777 3 ай бұрын

I only can say thanks ❤️

@GausDIY 3 ай бұрын

I'm very happy when it's helpful.

@heochienbo5183 Ай бұрын

thank you for the interesting test. It would be even better if you added wood-ashes into the test

@Kima775 20 күн бұрын

Interesting experiments

@tiredofcrap3569 Ай бұрын

I used baking soda/crazy glue on a edge to edge thin vacuum plastic trigger that cracked. Thought it would be temporary until I got the new switch. Three years later it is still functioning and we use that vacuum every day. The new switch is still in the plastic bag it was mailed in.

@jammin1984 Ай бұрын

Good helpful video! Thank you!

@tuttebelleke 3 ай бұрын

Learned something here!

@joserubio3472 4 ай бұрын

Try with graphite. Everyone has a pencil at home, turn the lead into powder,I'm sure you'll find that it makes just as strong bond if not stronger than most of the ones shown on video.

@yankitrn Ай бұрын

Which glue or bond you have use to fix the joint

@moh78amed 3 ай бұрын

good test 👍

@darrellturner560 4 ай бұрын

So unscientific experiments but a bit of fun anyhow.

@Feed_The_Fink 18 күн бұрын

im team styrofoam. What you should do is take a cup of acetone and continuously add strips of left over styrofoam from packages and amazon deliveries until you have a thick gooey clear mixture. you can store it in a Mason like jar and keep it like a glue. It dries solid

@seckinseckin3919 4 ай бұрын

i use graphite powder and baking soda sometimes but i see there is not so much difference each other so i can mix graphite powder and baking soda no problem.

@SevenDeMagnus 4 ай бұрын

Very important test. Try chopped into little pieces or twill carbon fiber too. God bless testers.

@Gazsoka66 4 ай бұрын

I missed the glasspowder, used usually in composite-making industry, how could that perform???

@leloup1956 Ай бұрын

with cement it is working very fine !!

@sehuz7957 2 ай бұрын

interesante experiencia. Creo que sería mejor posicionando el instrumento de medida siempre a la misma distancia del punto de adeshión.

@lionelfelix6631 4 ай бұрын

Omg the complaints… and most people didn’t learn the important results, there are many options for adding material that can help a project. I use baking soda and it acts as a catalyst. Do the others instantly react too?