3 HIDDEN Reasons Your Helix Tone Sucks That EVERY Helix Owner Should Know

Рет қаралды 16,522

Күн бұрын

For my Presets visit: johnnathancordy.gumroad.com/
For ArtistWorks courses: artistwork.prf.hn/click/camre...
For TrueFire courses and All Access Memberships: prf.hn/click/camref:1100lqzr3
Use the code JNC40 for a 40% discount off all courses, or JNC100 for $100 off all access membership!
Here are 3 somewhat confusing "features" in the Helix that I sort of think should default to off....But they don't...
00:00 Intro
1:27 The cost of "accuracy"
2:15 HUM
4:14 HEADROOM
7:06 Input Impedance
/ johnnathancordy get my lesson tabs and backing tracks here
www.buymeacoffee.com/johnnath... - if you like what I do and
only if you wanted, you could buy me a coffee!
Get my PADs bundle here: www.paypal.com/cgi-bin/webscr... (this folder will grow, and I'd encourage you to ask for different keys/songs and stuff that might suit this type of preset?)
I've decided to make it possible to grab both my Helix/HX Stomp bundles (the expression bundle with freeze presets has always been separate) together - www.paypal.com/cgi-bin/webscr... - I will then email you a link to both bundles!
Try my general patches for Helix or HX Stomp in this bundle using this link - I will then send out the patches! www.paypal.com/cgi-bin/webscr...
You can get my EXPRESSION patches in this bundle using this link - I will then send out the patches! www.paypal.com/cgi-bin/webscr...
Try my patches for Pod GO using this link - I will then send out the patches! www.paypal.com/cgi-bin/webscr...
/ johnnathancordy get my backing tracks here
www.buymeacoffee.com/johnnath... - if you like what I do and
only if you wanted, you could buy me a coffee!

Пікірлер: 81

@Hickeroar 28 күн бұрын

Great video, thank you! There's a channel called "Hey Worship Leader" who also has a great video from about 2 years ago about what Sag, Hum, Ripple, and Bias all are which goes into a little more depth about those things. I was always annoyed by the impedance thing you mentioned, so that was a great callout. I had no idea what was causing what I was seeing with some pedals being in the line, but disabled and still changing the tone. I also had no idea what the headroom thing was, so loved that you explained it.

@gladejustglade 28 күн бұрын

Time to clean those pots big boy.

@jackmansfield9707 23 күн бұрын

😂😂😂😂

@picksalot1 28 күн бұрын

Excellent advice and demo of how those settings can significantly affect tone in the Line 6 Helix world. Thickening up the Highs in particular has always been a challenge. Setting the Impedance to "Enabled" has a significant and beneficial effect. Some of my were fine/better with a change in this setting, and some needed me to about ".4" to the Treble Parameter in the Amp Block to get them back to where I liked. The added benefit is that the tones are thicker sounding. There is also something about how our ears/hearing responds to different frequencies when the sound is at a different loudness. It is called the "Fletcher Munson" curve, and explains how/why louder often sounds better. Thanks

@jakestewartmusic 28 күн бұрын

I max the Headroom for post-amp effects, but it can sound vibey with lower headroom when used BEFORE the amp or cab block - on the tape delays in particular, it gets that saturated/old-tape sound. The clipping introduced just needs an amp or cabinet to smooth out the rough edges; that's why it sounds bad with low headroom towards the END of the chain Also, another way around the input impedance issue that isn't a global change like Auto Enabled is to set up a FS controller or Snapshot (whatever is engaging the effect in question) to toggle the input impedance selection to "1meg" (or your desired bypassed impedance) when the effect is bypassed and "auto" when it's engaged

@MattPriceGuitar 28 күн бұрын

I do the same thing, especially for rockabilly style slap back.

@trickfall8752 28 күн бұрын

Very helpful and timely. I was just going through all of my presets last night and was messing around with hum and was wondering about the headroom setting.

@timgittar 27 күн бұрын

Thanks for this, Jonathan. I’m going to get into that impedance solution ASAP.

@brandonlambert6399 27 күн бұрын

I just discovered the input impedance parameter when building a preset for a very low output acoustic piezo pickup. It didn't occur to me how much it would affect my electric sound as well. This is great content!

@Tascamaniac 10 күн бұрын

Very informative video... but really AWESOME playing! (It's the fingers; here, there & everywhere.)

@biswas01 28 күн бұрын

Thx for the suggestions! I've been going down a Buffer rabbit hole on my regular pedalboard (non-Helix) and feel like your impedance settings is similar to controlling the drop off in signal as it goes thru the efx chain before it gets to the amp. Super helpful (and timely for me!)

@limpeacock573 28 күн бұрын

Very helpful! Thanks John.

@DaviSiqueiraSilva 28 күн бұрын

Wow, I'd never know that the Red Squeeze messes with the impedance that much!

@greenflamingoguitar2758 28 күн бұрын

extremely info here! thank you sooo much! I didn't expect the "true bypass" discussion to be relevant in the modeller world, but it seems it is! the "real world" equivalents of fuzz pedals and treble boosters typically are true bypass and that's what I expect a modeller to model as well!

@user-ri3gh6yb5k 28 күн бұрын

Excellent information thanks JNC

@maxostrowski5269 28 күн бұрын

Hey man, love the stuff and everything is always really informative! I had a question, could you demo using your helix floor going to an actual amp for what would be a live bar gig? I have a deluxe reverb so I only use the line 6 for drives, effects, etc w/o amp modeling but I rarely can get a good tone. Even with nothing on, I’ve noticed that my signal sounds different than direct to amp. Typically louder, and maybe high end roll off.

@sjsphotog 26 күн бұрын

Great info JNC. Keep it up

@rovenordiales 28 күн бұрын

Great content!

@MetalTerrorist 28 күн бұрын

Great tips, John!

@SimonGaiser 28 күн бұрын

Thanks for pointing these out. Completely agree. I have noticed these previously and avoid them.

@foxmeisteruk 28 күн бұрын

If you don't like the default settings, simply change them and resave as your user defaults for that model.

@archbox8593 28 күн бұрын

Headroom and Hum I knew about but wow i did not lnow the impedance stuff :O thanks for the video :)

@guitarspeakpodcast1383 27 күн бұрын

snap! same here...

@kevinbrennen6773 15 күн бұрын

While the Litigator is still probably my favorite amp native to the Helix, it is a little noisy. I've messed with the Hum but feel like at 0, it does take away a little of the "body" from the sound. I think I just left it at 5 as that's where I dialed in the sound but I'd like to mess with it to get it a little cleaner. It's obviously not noticeable when playing but if I use a patch with the Litigator at church or something and not playing, I can hear the slight hum in my in-ears. I'd assume for recording purposes it would be annoying as well. Agree 100% about the Headroom thing as well!

@jnh73 28 күн бұрын

Super helpful video John! One non-Helix thing to consider; it was a game changer for me. Put a treble bleed circuit in your guitar(s). Either do it yourself or if you're all thumbs with a soldering iron like me have it done by your local shop. In combination with setting the In-Z parameter of the Stomp to your liking it's a killer combo. Volume up full - no "drag" from effects (thanks In-Z!) and when you roll back the volume on your guitar, the top end stays sparkly (thanks treble bleed!).

@joeltunnah 17 күн бұрын

The volume control rolling off highs is a feature not a bug.

@AramPino 8 күн бұрын

Brilliant explanation!! Thanks

@dominiccastillo9677 28 күн бұрын

Great video!

@viktortulbya2107 Күн бұрын

This video should have been made like 5 years ago lol, but hey thank you anyways, some of these i figred out a couple on my own but still learned something

@mattofthemountain 28 күн бұрын

Helpful video, epic title though

@matiascardo 24 күн бұрын

Really good! Will try those

@FBulfamante 19 күн бұрын

Does the Quad cortex have these "hidden" parameters that affect tone? I know endless tweak ability is desirable for some people, but I'm looking for simple. Seriously considering getting rid of my Helix because of things like this. Thoughts on uad Cortex?

@BillySoundFarm 28 күн бұрын

Are you using AI generated titles?

@shawnmcginnis2508 28 күн бұрын

Hum is pretty self explanitory. Ripple does add some interesting overtones to the sound as is very noticable on VOX amps. Not saying you'll like it, but it is something that real amps do and should be considered in how it interacts with your playing. You'll notice it more when playing around the twelth fret and higher. Almost like a out of tune ghost note being played underneath your actual played note. So while it has some effect on the "hum", really it has more of an effect on the higher notes you play. It may not always, infact maybe never, "sound good", but it is a realistic dynamic of a real amp and turning it of may cause the amp to sound more sterile when compared to the real thing , or maybe you'll think its just fixing an unavoidable flaw with real amps and love it turned off.

@r0bophonic 28 күн бұрын

These are super helpful! One issue that I’ve experienced is ice-picky highs - I think you had a video on global EQ settings to address this?

@jnh73 28 күн бұрын

In my opinion it's more effective to use High Cut at the Cabinet level in each preset. Start at 5.5 kHz and go down from there. Most real guitar speakers don't amplify anything interesting over 5 kHz anyway. My main preset in my Stomp XL has HighCut set at 4 kHz. In my opinion, cutting things using Global EQ risks making sparkly clean tones sound like they're partially covered in a blanket. For my squeaky clean tones, I leave HighCut off.

@GS-uy4xo 28 күн бұрын

@@jnh73 Do you know where the global sits in the chain (I’m guessing that very end) and is there any info regarding Q? Thanks

@CiuciumisLuci 27 күн бұрын

That input impedance tip it s a game changer. I never understood why the tone is affected when i put another pedals on the chain even when they are off. It’s ok to have that option always enabled?

@tnoam 25 күн бұрын

I’m using the HXSTOMP at the end of my chain with drive pedals in front of it. What impedance should I use?

@cgrant86 28 күн бұрын

Hi John, do you have the guitar pad on or off on your presets?

@PuRe_AdDicT 27 күн бұрын

Off for single coils and on for humbuckers I think is how that works?

@tah5w 28 күн бұрын

But when you're sculpting a preset, you are dialing in the tone under the condition of auto impedance, so you will have balanced out what top end is lost by not being at 1 M. Right?

@HarrrySpider 23 күн бұрын

If you don't mind, can you tell us which patch you are using in the intro of this video, please? I bought your Plug and Play bundle, and a couple of other things. The patches sound very good on your KZfaq channel, I am finding that I need to tweak them fairly heavily to get them to sound good on my rig. Maybe that's normal? Frankly I haven't spent this much time tweaking something to get it to sound good.. ever, now that I think about it. Yeah, I've spent weeks tweaking a million variables, trying to get that high-end buzzy, crinkly sound out. Also, the distortion on the low end sounds phony, like a dying hi-fi, nothing like a tube amp to me. I really want to make this thing work, it would be great to have a modeling rig that would plug straight into the front of the house, and be done with amps and mic up to cabinets and things like that. But so far, after weeks of tweaking, I still only have one or two sounds that I would play in front of the public. But somehow your stuff sounds fantastic on this channel. Baffling to me with the difference might be..

@GTV101 23 күн бұрын

another one is global EQ....I almost always turn that off. Only using it when its totally necessary. It's turned on by default btw.

@matt_greene 28 күн бұрын

do you usually keep your master volume know at 12 o clock? does that make any difference?

@jnh73 28 күн бұрын

It makes zero difference. The Stomp's master volume is only for the overall output level of the unit. It has no effect on tone.

@tricemooneyham3070 28 күн бұрын

Geeze your tone is RIDICULOUS 😭

@DoubleDguitar 28 күн бұрын

Right?!

@lancenunez8252 28 күн бұрын

John for president!

@yugesh99 26 күн бұрын

awesome info

@TheDilligan 28 күн бұрын

I typically leave Hum at 5, but you are right. There should be a global parameter to just eliminate amp hum. I always like the headroom all the way down on delays. In fact I wish it could go a bit lower when I'm using a lower-output guitar. The saturation on the delay helps create space between your dry signal and the repeats. I hope they add a dynamic spring reverb in the future and that includes a headroom parameter. Distorting spring reverb is one of my favorite sounds. For impedance, I typically keep it set to 1M ohm so that my effect choices don't mess with it at all.

@DoubleDguitar 28 күн бұрын

Thanks for this.

@echolalia1965 24 күн бұрын

If I could chose to play like any guitarist, I would choose to play like J.N.C.

@Langston_ 28 күн бұрын

1 hidden reason why my helix tone doesn’t suck -> I bought John’s 😭 💀

@timgittar 27 күн бұрын

Thanks!

@Riflex04 28 күн бұрын

Bro record a video with the Tonex One in the return/send of the helix floor to see the tone and the effect of the helix how they feels with it

@DoubleDguitar 28 күн бұрын

I just got my One and stayed up late to set this exact scenario up, but with the stomp. I can’t wait to get home tonight.

@Riflex04 28 күн бұрын

@@DoubleDguitar awesome!! 👏 let me know the results.

@DoubleDguitar 28 күн бұрын

@@Riflex04 will do 🤘🏻

@Newnodrogbob 28 күн бұрын

@@DoubleDguitarcommenting so I can see the update😊

@dasczwo 28 күн бұрын

@@DoubleDguitarlol, just was at the pedal exhibit berlin., ik was there, had two tonex ones running into an hx stomp… i do it with an uafx ruby, freeing the hx up for what it excells at: 8 blocks of pitchy glitchy delays … great box still. against hx fizziness i tend to roll down the highs above 8000khz… youll find not much coming out of a plexistack with a thick carpet in front, with a mic lying on the floor, rip steve albiniy

@TheZenguitarguy 27 күн бұрын

Input Impedance!!! exactly!

@DaviSiqueiraSilva 28 күн бұрын

I must be crazy, but I heard some of Whitney Houston's lines from her version of "I'll Always Love You" from 0:11 to 0:20, and then John falls in a different chord and my epiphany ended, lol

@jeremytee2919 28 күн бұрын

Hum is a caveat of tube amps To much focus on pure emulation, Particularly with noise floors I think they should be solving issues not emulating them. It is nice that you can dial out a bit of hum, But theres still noise that would exist in a high voltage circuit that doesn’t need to exist in a digital world.

@jeffkowalczyk 28 күн бұрын

Terrific tips, thanks. On a related topic, I'd be interested to see how the Helix impedance settings can best support the method for reduced guitar volume into Germanium fuzz first in the toolchain, described succinctly here in Pete Thorn's video kzfaq.info/get/bejne/ptuZpqyd15yuoZc.html Many of your Helix tones highlight a glassy top end, and it would be interesting to compare and contrast the tone character of this method, and which Helix fuzz and amp model combinations can best elicit the effect. It may be interesting to players including those not using modelers if the Germanium effect can even be replicated in Helix with the modeled fuzz positioned later in the effect chain through the use of clever impedance settings.

@wasouthpnt 28 күн бұрын

Does this even apply to helix floor?

@jnh73 28 күн бұрын

Yes, everything John talks about is also in the Helix Floor.

@bjarnedahlberg5361 27 күн бұрын

Nr 1 my PLAYING sucks Nr. 2 it still sucks. Nr.3 it wont get any better as i dont practice. L.O.L I always set ripple and hum to 0 one of the first tricks i learned to get better tone in Helix back in 2016 i used to do that aswell with the sag parameter but recently i added some sag in my amptone as i think the tone need some sag.

@Herfinnur 28 күн бұрын

You're releasing too many video with great topics in too short a time frame for your own good, John, there's no way I'll have time to watch all of them in a timely manner!

@Crabfather 28 күн бұрын

Bit of a scratchy selector switch there man..

@m0j0b0ne 26 күн бұрын

What do you want? Accuracy or perfection? An AC30 model doesn't sound right without the inherent hum; likewise with tweed Deluxes. Is this a ding? If it bothers you, you can dial it out. By the title, I thought I was being alerted to an HX defect. There's no such thing, if you've read the manual and know what you're about. Clickbait to the rescue, eh, mate? Nice playing, thanks for that.

@Crabfather 28 күн бұрын

Second !