It is constantly freezng driving me crazy.

After weeks & weeks of Fusion driving me absolutely NUTS!! I'm about ready to give up!! It's taken me literally weeks part time just to design some small parts!!... Grrrrrrrrrrrrrr!!

crashed 3 times while watching this video

Crashes on me all the time then my file ends up corrupt to the point it’s easier to start over and redraw then to try and continue after a crash. Inventor is much easier to draw in and no issues like it but mostly it’s post processing where it crashes so I’m looking for an alternative.

April 2023,,, I have been using Fusion 360 Electronics for 6 months. 2 to 3 random crashes each and every day in that time. Tried 3 different computers in that time, no difference, crashes same way on all of them. No Fusion error reports of any kind, just a fatal windows crash message. Timed auto backup doesn't work either so lost work every time.

1) create a line in sketch mode 2) move a body 1mm to the right etc., Fusion360 is absolute garbage

Hi everyone. On my pc Fusion just won't start anymore. When I try to lunch it it shows the loading logo and then a blank page plus an error mesage (to send a report). I tried to reinstall Fusion still the same. Updated graphics drivers no changes. Does anyone have a simillar problem? Please help!

Fusion crashes when I print on my laptop but not from my desktop.... any Ideas?

Much respect as I think you are one of the very best. However, while you guys are playing with solid models, I'm already making chips. To believe that creating a solid model every time you need a NC program is efficient, is frankly nuts. Again, much respect to you. You are one of the best instructors I have ever seen. My comments are not aimed at you, just the Fusion 360 workflow. But then again, I should not complain to much as we get what we pay for with "Rent-a-CAM".

I have done a lot of dumb things in Fusion 360 and it hasn’t crashed yet. I can usually stumble on something that will cause a crash. So far, it’s very stable!

Fusion crashes without saving backup file. What a nightmare.

i kept crashing fusion every few nimutes, this video helped me understand why, now hopefully i can find the issue

Hi Lars! We have a little guitar company in the north Indian Himalayas and as we have new guys coming in and learning CAD and CAM for CNC, I've been trying to figure out which software to commit to. I've downloaded Fusion 360 using 3 different email addresses, so I've had several weeks of trial over the past year or so. Unfortunately I always run up against crashing that I just can't understand how to get around. Mainly I've been trying to model our vacuum table, which is a rectangular pattern of bodies (26 units x 18 units). I'm running up against my last few days with this latest trial and I just can't commit to purchasing the software, because I have no confidence that I'll be able to use it to model if it keeps crashing. I was hoping with this video you might be telling us about specific issues that cause crashes, showing us both how to crash 360 in typical ways, and some workarounds to avoid those types of crashes. Would you consider doing a video like that?

Hey! Can you show how you would create a parametric designed boomerang?!?!

I can’t ever make the live stream, so thank you to doing the recordings Lars

Fusion crashes every other time I use it. It's setup on 2 computers, I started with macbook Air, was very sluggish so updated to a macbook Pro. I have not tried a complete re-install, hopefully that will help.

Geez once a week? Sounds like a lot to me even if you are handling large files with a lot of components. With hardware being what it is today, I would think maybe every few months would be more realistic. Granted we aren't using workstations on par with Dreamworks or anything but still.

Hi Lars, at around 11:15 you said that you "went into the forum". What forum and where is it please? I like forums. They are usually very helpful. Thanks.

Autodesk Inventor would crash on me all the time. Turns out it was an installation issue. I wonder if Inventor will die out?

Fusion crashes on me when i try and make intricate patterns 🤷🏻‍♂️ sometimes it finishes them but to work with the paterns then becomes a nightmare

Using the gear add on really likes to try my patience I try to avoid it if I can

Thank you for the information Lars. I have a friend that is busy learning Fusion but there is one problem... Her fusion doesn't want to start-up. We did an installation (didn't work) we did an uninstall and still it doesn't work. I then did a search on the internet to see if I could find a similar issue on this matter with no prevail. Do you have any suggestions on how to fix a problem like this? Once again thank you for the epic live sessions.\m/

i got a simple design and it crashes i want to make a loft and BAM fusion 360 does not respont

I've crashed fusion 3 times just tonight lol. It"s either im going to fast or fusion isn't set up for noobs. still love it though.

Lars, First off, because of you, I primarily use Fusion 360. I am a Hobbyist and just Love the fact that, almost, everything that I can think of, I can create. My problem Lies in Ball Joint Swivels. I can Design them and print them but they are all too weak where the ball connects to the shaft and it constantly breaks. I have even tried printing it on its side so the print lines are vertical instead of horizontal. Again I am a noob and just about everything I know about Fusion 360 I learned from you. Any Tips, Ideas. Thanks so much for all that you do for us. YOU ROCK!!! Oh! by the way it's for 3d printing on a creality CR-10 ( upgraded to CR-10S).

Hi Lars. Fusion 360 ignores my tool offsets (lengths) in my Mach3 tool table, crashes my tools into the table! Any ideas? Thanks

I'm pretty sure i managed to crash Fusion 360, like 12 different ways...

sorry i missed the livestream was heading to work

Fusion just froze on me. Im not sure if this is the same thing as the program "crashing". I went to import a bushing from the McMaster Carr catalog and the program just wont respond to anything i do. Figure im going to have to just close out and reopen the program, but its fairly odd i think that one little bushing would do this when it didn't have any issues with Nema motors and lead screws being imported. And while i'm commenting, am i the only one who has more issues with fusion 360 than Autocad? I feel like the hotkeys were more intuitive in Autocad than they are in Fusion, and i cant for the life of me figure out how to change the plane im working on like i can with the UCS function in Autocad. And the way that the presspull function works in fusion, I HATE it. Why it has to automatically attempt Fillets and such when i want to Presspull, IDFK, but its BS I think. Parametric Modeling is all fine and dandy, but i could lay out a set of plans in Autocad with ease, and every time i go to use fusion its just one headache after another. A lot less productive i think, less intuitive than its made out to be. Maybe i just haven't spent enough time using the program, but to have to completely change my methods for modeling from one Autodesk platform to another is lame.

Hi Lars, I can make fusion 360 cash every time I open it if I don't change the DirectX settings for my video card, it was funny I installed the 30 day trial and got it working, and after 30 days I had to do everything all over again after renewing the license. I also lost all the stuff I had made in the cloud, that I didn't expect. One more thing is there away to make sense of all the file extension in the fusion folder; like .f2d , .fd3, _xx and d8fb0231-4165-481d-a990-aecb836fe45c - I'm sure this is some kind of a file rev of a file but have to open it to see of what.keep up the good work learning every day.

Fillets on certain shapes crash Fusion360...

5 minutes in your still taking about things I don't care about get to the point maybe get the smarter guy idk just stop babbling