3 Ways to Set Square Cabochons: A Silversmithing Tip

Рет қаралды 8,245

11 ай бұрын

This tip shows how to make 3 different mountings for square or squarish stones that aren't standard bezels. There are tons of variations possibilities with these, so have fun experimenting! I would categorize these as intermediate level. The materials for these can vary, but for these ones, I used 26 gauge sterling sheet, 22 gauge sterling sheet, 26 gauge sterling sheet, 22 gauge sterling wire 16 gauge sterling round wire wire, 14 gauge sterling square wire, 14 gauge sterling round wire. As always, I use hard silver sheet solder and My-T-Flux from Rio Grande.
I enjoy sharing my knowledge with others, as I've taught people for most of my life. This hobby turned into a fun side gig for me for years while I taught public school. I love suggestions and hearing about others' experiences. What is your favorite project? What kind of tutorials would you find useful? Scroll down for information on my new Patreon!
Please feel free to share this video, and I would love to have you subscribe! Make sure to ring the bell for updates when new videos are uploaded.
I just passed 4000 subscribers! Thank you all for making that happen.
If you’d like to contribute to my efforts, or express appreciation, you can at the link below.
www.buymeacoffee.com/cvpark7
Thank you so much for all the kind words and suggestions!
Here is my website where you can purchase my jewelry, and can inquire about classes if you are in the Northern Colorado area:
www.cvpsilver.com
Thanks,
Chad Parker
Join My Patreon!
www.patreon.com/user?u=5602676
Tier Information:
Silver Supporters
$5/month
This is a much appreciated way for you to support me while gaining access to some exclusive ad free content.
What's included
* Support The Artist
* Ad-free content
Silver Super Supporters
$10/month
You receive all benefits from the first tier as well as a shout-out on my channel. Here you will also get some behind-the-scenes peeks, and voting power concerning some upcoming content.
What's included
* Support The Artist
* Ad-free content
* Patron shout-out
* Behind the Scenes Content
* Voting power-to determine projects and influence content.
* Exclusive video tutorials
Silver Stars
$25/month
This tier provides all the benefits of the 1st and 2nd tier. In addition, you get access to a monthly live stream, a Q & A session, and discounts on jewelry.
What's included
* Support The Artist
* Ad-free content
* Patron shout-out
* Behind the Scenes Content
* Commission pieces mutually agreed upon(delivered by mail)
* Livestreams
* Live Q&As
* 15% off jewelry purchases
* Voting power-to determine projects and influence content.
* Exclusive video tutorials
Silver Superstars
$150/month
This level of membership provides all the benefits of the previous 3 tiers. In addition, it includes live-streamed interactive instruction in a small group format twice per month for 8 hours per month total. This tier is limited to 4 people for now.
What's included
* Support The Artist
* Private community
* Ad-free content
* Patron shout-out
* Behind the Scenes Content
* Livestreams
* Live Q&As
* Live Virtual Small Group Instruction
* Voting power-to determine projects and influence content.
* Exclusive video tutorials
* Commission pieces mutually agreed upon(delivered by mail)
_______________________________________________________________________
I NOW HAVE MERCH!
Click the store on the KZfaq channel page to check it out.
, or here is a link:
chads-silversmithing-shop.four...
#jewelrymaking #silversmithing #jewelry #jewelryhandmade #jewelrytutorial #jewelrydesign #jewellery #jewellerydesign #handmade #maker #crafts #jewelryartist #bespoke #artist #silver #scrap #earrings #diy #jewelrytips #finding #jewelrytips #jewelrytutorial #open #wire #intricatedesigns #thumbring
#patterns
Making mounts for square stones
non-traditional stone settings
Making Silver Jewelry
Making Jewelry

Пікірлер: 66

@sharonclevenger9170 11 ай бұрын

So,so glad I found your channel, I’ll keep watching

@chadssilversmithing 11 ай бұрын

Thanks Sharon! Glad you like it:)

@patredden4557 11 ай бұрын

Another great video, lots of valuable information. So pleased to see that you have over four thousand followers, it doesn’t take long for people to catch onto a good thing. Keep up the great work. Thanks so much.

@chadssilversmithing 11 ай бұрын

Thank you Pat! It’s you and other supporters who make this possible!!!

@texasgigi3684 11 ай бұрын

Great video. I may have to go back and watch it again. I love all of the settings, but the frame around the pink stone is my favorite!

@chadssilversmithing 11 ай бұрын

Thanks Gigi. That was the most challenging one:)

@cryseldaventer8567 Күн бұрын

Thanks for sharing your knowledge with us!❤

@chadssilversmithing Күн бұрын

My pleasure!

@amberjojola5007 5 ай бұрын

Chad is like today's Bob Ross, but metal style 😎 lol always great content!! These videos help me out so much!!

@chadssilversmithing 5 ай бұрын

Thanks for that Amber! I take that as a huge compliment:)

@dawnwilliams838 11 ай бұрын

Great video as usual. My fave was the square pink quartz. It turned out so beautiful. So much value in your videos. I watch some several times for techniques. So glad I found your channel! 😊

@chadssilversmithing 11 ай бұрын

Thank you Dawn. The pink quartz one was kind of a booger. If you try that one be sure to leave enough room to account for the bends of the flaps on the back!

@respond2julie 11 ай бұрын

Great video. I love square stones. Thanks. The ring rocks!

@chadssilversmithing 11 ай бұрын

Thanks Julie!

@SwedishCowgirl7 3 ай бұрын

Always so enjoyable, to watch you work❤ thank you for sharing.

@chadssilversmithing 3 ай бұрын

My pleasure SwedishCowgirl! Thanks for the nice comment!

@betojdesigns 11 ай бұрын

Great timing. I have some square and rectangular stones I’m considering making settings for right now. Thanks for the inspiration. I’ll go give it a go. I liked them all 😊

@chadssilversmithing 11 ай бұрын

I look forward to seeing them:). Thanks Van!

@betojdesigns 11 ай бұрын

I had a booger of a time, melted several of my my loop prongs along the way. It definitely went through an ugly stage, but I finally got it together. You make it look so easy!

@chadssilversmithing 11 ай бұрын

@@betojdesigns I’m glad you got it to work eventually!

@jimbartley9125 11 ай бұрын

Good variety of different methods. Thanks for your time. Cheers. Jim

@chadssilversmithing 11 ай бұрын

You are welcome Jim! Thanks for the comment!

@joannfletcher8864 11 ай бұрын

I love your videos, thankyou so very much.

@Gazz_R 11 ай бұрын

Lovely pieces as always. Thanks for sharing chad and take care.

@chadssilversmithing 11 ай бұрын

Thanks Gazz!

@NikiLucky-cj5bd 11 ай бұрын

Marvelous as always third b one is timeless xoxo

@chadssilversmithing 11 ай бұрын

Thanks Niki! I appreciate the nice comment!

@CherylAnn2222 11 ай бұрын

Great Video!!! I love new setting ideas!!!

@chadssilversmithing 11 ай бұрын

Thanks Ms.C2222! The Rose Quartz one was kind of a bear to do:)

@carolchase2086 11 ай бұрын

Great video! You make everything so easy!!

@chadssilversmithing 11 ай бұрын

Thanks Carol. The Rose quartz one was a bit of a pain getting the size just right:)

@alexmarkovic5871 11 ай бұрын

Beautiful pieces, thanks for the tutorial. I always seem to have issues setting square cabs.

@chadssilversmithing 11 ай бұрын

Thank you Alex! Glad you found it useful:)

@wynemawalker 11 ай бұрын

Thank you Chad, these are beautiful!! I'll definitely have to rewatch though but that's always a good thing 😉

@chadssilversmithing 11 ай бұрын

Thanks Wyn!

@sherihinton8183 11 ай бұрын

Great video!

@chadssilversmithing 11 ай бұрын

Thank you Sheri:)

@pkgoldopalhunting 11 ай бұрын

big piece good job

@chadssilversmithing 11 ай бұрын

Thanks PK!

@ruthdederich3622 5 ай бұрын

Nice, thanks!

@chadssilversmithing 5 ай бұрын

Thanks Ruth! I appreciate the nice comment:)

@soroushsaharkhiz 11 ай бұрын

Beautiful 👌👌👌

@chadssilversmithing 11 ай бұрын

Thank you Soroush!

@soroushsaharkhiz 11 ай бұрын

@@chadssilversmithing 🙏❤️🙏

@marthalyttonvantrees1119 8 ай бұрын

Thanks for the great videos and your calming voice! I like to make thick bezels--I cut them from 18 gauge sheet--but struggle with getting the size correct the first time. Could you please do a video on thick bezels for round, oval, and square stones? Thank you!

@chadssilversmithing 8 ай бұрын

Wow! 18 gauge thick bezels would be challenging. Are you using sterling or fine silver? I’ll look into it:)

@marthalyttonvantrees1119 8 ай бұрын

@@chadssilversmithing I use fine silver and a Technique Swiss hammer handpiece. Thank you for your reply!

@jimk7087 11 ай бұрын

Owyhee. Pronounced Oh Why Hee. Desert area in the far southeast corner of Oregon near the Idaho and Nevada borders. Lots of good jaspers agates geodes and more out there. Love your vids from a subscriber in Oregon

@chadssilversmithing 11 ай бұрын

Thank you Jim! I always wondered how to pronounce that name. Sounds like a good rockhounding area. Wish it was closer:)

@judyirwig2835 10 ай бұрын

Thanks

@chadssilversmithing 10 ай бұрын

Thank you for your generosity Judy! I really appreciate it!!!

@quietinspirationcreations3448 11 ай бұрын

Hey Chad, New sub here, I've been binge watching your video's for the past few days and am really enjoying your content. I appreciate that your working on your audio levels as I too, find your musings difficult to hear at times. You call it mumbling, but I have found that you provide a wealth of valuable advice while "mumbling". I have been wire wrapping jewellery for a few years now as a hobby, and recently took the leap from buying copper coated wire to Sterling Silver, but since discovering your tutorials, I'm really feeling like I want to take the further step into actually soldering and making 'real' jewellery! I have some experience soldering jump rings and doing basic repairs with a small jewelers oxy-aceylene torch. My question for you though, is what should I start with, when buying some sheet product to make this rather intimidating transition?? In sterling, I have the basics for wire, 18-28 gauge round, 18 and 20 gauge square, and some half round, along with the 3 levels of solder, but when it comes to sheet products, so many options feel ovewhelming, so I'm hoping you might offer some suggestions (like gauge and hardness)! I too, will be buying from Rio Grande as it's difficult to find supplies in Canada. P.S. In my wire wrapping, I tend to try my designs in copper before attempting silver, to avoid expensive losses, would you recommend doing the same with first attempts at soldering and sheet pieces?

@chadssilversmithing 11 ай бұрын

Hello Quiet Inspiration! Thanks for the nice comment:). I think it is fine to try some things in copper first if you find that helpful. I would note that being different metals, soldering them may be a little different. The three gauges of sheet I use most often are 26, 22, and 18. I buy pretty much everything dead soft. Hope this helps!

@quietinspirationcreations3448 11 ай бұрын

@@chadssilversmithing Thanks so much, the hardness is definitely one of the great mysteries for newbies, I look forward to trying some new techniques with your video guidance!

@flyingcheff 11 ай бұрын

Hi Chad! Ambitious again! These 3 of a kind projects are amazing. I have a question for you about the ring square setting. What measurements would I take on my square stone to make this setting? You said "a little bit bigger," but I'm not sure what that meant. Thank you as always, maestro! 🌺🌺🌺 Did I miss something pr was the explanation of the last piece accidentally edited out? Ot sort of looked like the stone went i. From the back - which you said was ghe plan, but have no idea what you did, and why/ how (the pieces). What did you do? Fold something up, or down? Open? Push something? Love to know - thank you!

@chadssilversmithing 11 ай бұрын

Hello Flying Chef:). On this one, I made the square so about 1 mm stuck out on each side to allow placement of the loops. You could also probably mount them on the outside of the square if you wanted to. Regarding the rear mount, yes, I bent up those flaps I soldered on, put the stone in from the back and bent the flaps down to hold it in place. One thing I could have done better is give myself a tad more room to allow for the bending up of the sheet on the back. I didn’t leave enough space to easily pop the stone in. It took some persuading to get in there:). Next time I’ll know to do that!

@tammiehonican76 11 ай бұрын

Nice video! I have a couple of odd stones that this will work well with. Do you ever work with argentium wire? If not why or what is the difference? Those pieces turned out beautiful!

@chadssilversmithing 11 ай бұрын

Thanks. I haven’t messed with Argentium. Not sure why, other than it would get old explaining the difference to customers all the time:)

@margaretmckee7007 11 ай бұрын

I checked out your website. I really liked your dangling flower pendant. Any chance you could do a tutorial on that? I have a design for earrings that has some similar components. I’m able to solder the components fine but when I try to solder the components together I end up melting the silver. I gave up for now and just wire wrap the components together. They look fine and people seem to like them but I think if they are soldered together they would look more professional

@chadssilversmithing 11 ай бұрын

Hello Margaret:). I actually made that one while producing an exclusive tutorial for my Patreon tier 2 and above. It’s a available over there. You might try watching a video or two where I’m soldering together lots of little components. Here is one: kzfaq.info/get/bejne/b7xhqNaqx9PLdGQ.html But quite a few of the vids show some soldering together of multiple small components. Hope this helps:)

@verdabehner8963 22 сағат бұрын

Love these! Could you use he open frame with the loops for a CZ?

@chadssilversmithing 3 сағат бұрын

Hello Verda! I don’t see why not:)

@prubin111 11 ай бұрын

Mahalo my friend 🌺🤙🏻❤️

@chadssilversmithing 11 ай бұрын

Thanks Paula!

@karie9890 6 күн бұрын

O-wy-hee (wy like Wyoming) May I make a suggestion? Is there a way you can rig your camera from above your work space? When you were cutting out the last bezel template in paper, your hands fingers were covering what you were doing. Then, the next thing, you had it all finished in silver so we couldn't see how you did it then either. I just thought maybe if your camera was above you ((and a little more closely zoomed in)) it would be easier for us to see what you're doing. Thanks for keeping on, keeping on! ❤❤🤍🤍💙💙

@chadssilversmithing 6 күн бұрын

Thank you for the advice Karie!